User exit for inventory to incorporte field in LI20

Hi experts,
In LI20, we celar the differences in WMS. here system is showing the % and it not showing the quantity and it is not in layout.
My client is aksing to incorporate that field Quantity.
As per my developement team there will be user exit for inventory. Can any body help on this issue or is there any way to
acheive this issue.
Thanks in advance.
Thanks
Raghu

Hi Raghu,
You can actually get this information via transaction LX17. In there you can change the shown layout and add additional fields such as book quantity (total quantity) and counted quantity. There is also LI13n where you can see the counted quantities.
Hope this helps.

Similar Messages

User Exit for checking Purchase Requisitioner Field in CJ20N Transaction

Hi,
I want user Exit for checking Purchase Requisitioner field while making PR through CJ20N transaction. I have trie EXIT_SAPLEBND_001 user exit. Problem in this user exit is I am not getting Purchase Requisitioner No & Item No in I_CEBAN
structure.
Please suggest what to do ?
Regard's
Shabbir

Hi,
You can check with this BADI ME_PROCESS_REQ_CUST.
Kindly refer below mentioned link for further details:
Badi ME_REQ_POSTED For CJ20N Transaction
Hope this will help you.
Regards,
Mudita

User Exit for validating overall limit field and expected limit field-ME2xN

Dear Gurus,
Can you please suggest me any user exit or BAdi to validate the overall limit field and expected limit field in transaction ME2xN.
Or any other way to to achieve this functionality in ME2xN.
Our Requirement is while raising a service PO in the Limits tab the 'Overall limit' should be same as 'Expected Value', at present the user can enter overall limit greater than 'Expected Value'.
Regards,
Priyank Joshi

this will not work. you cannot add another structure (AUFK) on top of CEBAN. all characteristics have to be of one structure and since you want to release a PR it has to be CEBAN. before attempting to program something around that why do you not go to tx. OLME -> PR -> Release Strategy -> With Classfication -> Release Strategie and run it in a simulation mode. you will then see how it reacts.
there's a white-paper on service.sap.com explaning in detail release-strategies. it's a good one and a good read too!

BADI or User-Exit for Adding New Input Field in 0VTC

Hi Experts,
Has any of you worked on enhancing transaction 0VTC (Define Routes and Stages)? I have a requirement right now to add two new input fields in New Transport Routes screen. Could anyone provide a BADI or customer exit that I could use to modify the screen of the transaction?
Thanks!
Cross post locked
Edited by: Rob Burbank on Mar 8, 2009 2:58 PM

I'm concerned about the layout of the screen. Also, I didn't find any documentation about BADI_SD_ROUTE. Can anyone provide me the documentation for this BADI?
Thanks!

User exit for "Latest GR date"

Hi Experts,
Please can any one provide me user exit for "Latest GR date" field in PO item level to update the value with 180 days plus on the delevery date mentioned for PO item.
Thanks in advance.
Regards,
Vijay

Please check this answered link:
Common USER EXIT for ME21N,ME22N
Edited by: Afshad Irani on Jun 18, 2010 11:08 AM

User Exit for znme1

Hi,
Is there any user exit on field PAYR-ZNME1 for Tcode FCH5.
Thks
Shailesh

Hi Shailesh,
Refer to these links
user exits for Tcode FCH5
Re: field exit for account id on tcod fch5
hope they are useful to you.
Thanks!

BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.

Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

How to find user exits for a specific field

hi,
    How can we find a user exit for a specific fields .
as i know Three ways to search user-exits
1. SE80 look includes in a packages with name user-exits
2. by zreport which will fetch user-exit in a T-CODE
3. SMOD
but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
Please suggest me.
Thanks and Regards ,
Rahul Singh.

Hi Rahul,
Here is the procedure to create field exits.
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
Step 2: Go To Field Exit Transaction
u2022     The transaction to create field exits is CMOD.
u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
Step 4: Create Function Module
u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
u2022     You can add an identifier (an underscore followed by a single character ).
u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
u2022     Here you will add your desired functionality for the field exit.
u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
u2022     After coding the function module, you must remember to activate it.
u2022     Use the Function module -> Activate menu path to activate the function module.
u2022     At this point, you can return to the field exit transaction.
u2022     You should be able to 'green arrow' back to this transaction.
u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
u2022     Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
u2022     This step is only needed if you want to make a field exit local.
u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
u2022     In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
u2022     The field exit must be active for it to be triggered by the system.
u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
and in the coding part, You can write your logic to display the output of that field. and activate it.
once you complete the above,
Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
Hope it helps.
Regards
Radhika
Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

VT01N User exit for adding additional field to VTTP table and populate the

Hi,
Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number based on ship to address when we create a shipment..
need user exit in ...............to populate data to vttp table custom field when we append......

hi,
check these exits for vt01n.
Transaction Code - VT01N                    Create Shipment
Enhancement/ Business Add-in            Description
Enhancement
V56USVDP                                Preparation for updating new objects for transport?
V56USVDO                                Update new objects for transport
V56USTAT                                User-individual definition of transportation planning status
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
MV56AINI                                Initialization of transaction control for transportation
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
V56FSTAT                                Shipment processing: Activities when setting a status
V56L0001                                Status of Shipments for a Delivery
V56LDELI                                Read Delivery Data for Shipment Processing
Business Add-in
BADI_LE_SHIPMENT                        BadI: Shipment Processing
BADI_V56N                               User Exit for Message Determination: Shipment

Is it have some User exits for Vendor master trigger when click some field

Dear Experts,
I would like to know Is it have User exit for Vendor master trigger when click some field in Vendor master? not just User exit for Prior Save . Please kindly let me know some solution for this case.
Many thank.

Hi,
check may this bapi will be useful your requirements, BAPI_VENDOR_CREATE
below links may helpful for you:
BADI http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm http://support.sas.com/rnd/papers/sugi30/SAP.ppt http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm http://members.aol.com/_ht_a/skarkada/sap/ http://www.ct-software.com/reportpool_frame.htm http://www.saphelp.com/SAP_Technical.htm http://www.kabai.com/abaps/q.htm http://www.guidancetech.com/people/holland/sap/abap/ http://www.planetsap.com/download_abap_programs.htm http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm USER EXIT http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sapgenie.com/abap/code/abap26.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction http://www.easymarketplace.de/userexit.php http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sappoint.com/abap/userexit.pdfUser-Exit http://www.sap-img.com/ab038.htm http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html Rewards if useful......... Minal
still if you not find any solution go for custom exit, means in standard program only ABAP consultant change the program where you required, it is little risk, you have to do the more testing for this
BR:
Venkat.Gurram

User Exit for display User fields in MM03

Peace to All,
I was able to place user fields in Purchase View of MM03.
Question , how do I pull data from ZMARA table of my master data so that I can display it on MM03.
I will appreciate your help on this. Does anyone has a sample program to do so.
Thanks in advance,
Shilpa

Hi Shilpa,
Check the following user exit for MM03:
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display.
Hope this will help you....

User-exit for autopopulate nickname field in pa40

Hello Experts,
In transaction PA40 Create Personal data there is a screen field named Nickname which is Mandatory.
I want to autopopulate this nickname field when i enter first name last name, the first name field should enter the nickname.
Is there any user-exit for such a requirement.
Thanks in advance,
Thanks & Regards,
Nikhil K.

Hi Nikihil,
You can use the User Exit that you identified but the function exit to use is EXIT_SAPFP50M_001. This is one you should use to default values in infotypes and the EXIT_SAPFP50M_002 is used to do checks and not manipulate the valuse. This is one of the right ways to do it and I have implemented it before and it works fine. You may want to call the following methods to get current Infotype values from the screen and the proposed values to be updated with.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
              EXPORTING
                prelp =
              IMPORTING
                pnnnn = .
and
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
                EXPORTING
                  pnnnn =
                IMPORTING
                  prelp = .

Field Exit or User Exit for Maintenance Order field.

Dear All,
we need an field exit or an user exit for order(AUFNR)field in PM module.
The Client wants that the value of this field should be validated and for certaion condition an error message should be given while saving an invoice for this order.
Kindly provide the user exit ..
Its urgent.
Thansk in advance ..
regards
Ajay.

Implement Field Exit within program
For this example I am using dta element 'EBELN' from table EKKO.
Step 1: Execute program 'RSMODPRF', entering the data element of the field
Step 2:Create function module when prompted, and add you code to the source section using the parameter 'INPUT' as the field value you are checking
Step 3:      Save and activate Function and execute transaction 'CMOD'.
Step 4:      Choose option: Goto-> Text Enhancements->Data elements->New DE cust docu.
Step 3:      Save and activate Function and execute transaction 'CMOD'.
Step 4:      Choose option: Goto-> Text Enhancements->Data elements->New DE cust docu.
Step 5:      Enter data element
Step 6:      Save and activate
Step 7: Execute program 'RSMODPRF' again but this time leave data element field blank. Step 8: Select the checkbox for the data element you have just created and choose option: Field exit->Activate This will now be active for all instances of this data element, but you can assign specific program and screen combinations by pressing the 'Assign prog./screen' button. You can also change the code you entered in the field exit function module by pressing the 'Edit FM' button.
regards
vinod

User exit for me 51 to put field descryption for ekbn-sakpto in screen 505

hi .
i have a requirement to put field descryption in screen 505 for me51 tcode(program sapmm06b) for field g/l account in screen 505(Account Assignment for item 00010).
waiting for your resposne.
bye.
sita.

Hi Seetaram,
Hi,
By using the below code you can find the User exits for a particular TCODE.Execute this program and the TCODE in selection screen.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Reward if helpful,
phani

User exit for inventory to incorporte field in LI20

Similar Messages

Maybe you are looking for