User exit for iw21 to get Equipment 'position'
Hi,
can any one give the user exit for IW21, to get 'Position' of equipment.
i.e. when i enter equipment in IW21 i am to save it's 'position ' automatically.
Where do you want to to save the position in the notification?
Also see the link at the top of this forum for PM/CS User-Exits
PeteA
Similar Messages
-
BADI/USER EXIT for IW21 & IW22
Hi all,
Pls post me the correct BADI and USER EXIT for Tcode IW21 & IW22.
FYI
My req'ment is to do an enhancement to check the user level for releasing/issue permitting orders.User level should be assigned to the respective person to release the FLAG and not by all.
Pls comment.
thanks & regards
sankarHi,
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Regards,
Pankaj -
User-Exit for Serial Number Profile / Equipment creation
Hi ,
In the Material Master Data , we have a serial number profile and at the time of
Post Good Issue , the system do generate an equipment record in the Service Module .
That is standard SAP and working very well .
For some customers (Inter-Company) customers we do not want any Equipment record in the Service Module to be created .
What standard SAP functionality or user-exit can we use in order to not create the Equipment record in the Service Module ?
Regard'sTransaction SPRO
Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Serial Number Management --> Define Serial Number profile
In the Serial number profile, go to Serializing procedures. The EqReq field determines whether an equipment is to be created or not. For e.g. 01 in MMSL implies that equipment will not be created during GR,
Not sure whether this will satisfy your requirement. Will need more information for that...
Hope this helps,
Lakshman -
User Exits for IW21 - Notification Type
Hi ,
I need to access User Exit related to IW21 , IW22 Transactions.
I require the user exit to customize process for a specific Notification type 'KS'.
User exit when a notificatrion Type is created & when it is modified.User Exits and Badi's For IW21 & IW22
BADI's
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
USER EXITS
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings -
User Exit for VA41 Validity Date
Hi,
I am giving order type in VA41 Tcode and then Clicking on 'Create with Reference' .Then a Pop Up is getting generated. In this i am giving Contract created with validity date lessthan today's date(in Contract Tab).For Example i created a Contract xxxxxx with 'valid to' 9.12.2008. When I am giving this contract and clicking on 'Copy' button a Warning message is getting generated 'The sales document is only valid until 09.12.2008'. Now i have to change this into Error message instead of Warning Message.
i used User Exits mv45afzz,MV45AFZA,MV45AFZB. But the debugger is getting started only after Warning message got generated.Is there any User Exit for which debugger gets started when i give the Contract and then Click on 'Copy' button. Please Suggest.
Thanks
K SrinivasHi,
Create a file say breakpoint.txt file as follows:-
[FUNCTION]
Command=/H
Title=Debugger
Type=SystemCommand
Once you come to the screen of 'Create with reference' where you are giving the contract, from second session drag the above mentiuoned file to the session where you are running VA41, & drop it here. Now debugger has been activated. Proceed with debugging. This method you can use for any of the 'POP UPs'.
I hope this helps,
Regards
Raju Chitale -
User Exit for Validity Date for VA41 Tcode
Hi,
I am giving order type in VA41 Tcode and then Clicking on 'Create with Reference' .Then a Pop Up is getting generated. In this i am giving Contract created with validity date lessthan today's date(in Contract Tab).For Example i created a Contract xxxxxx with 'valid to' 9.12.2008. When I am giving this contract and clicking on 'Copy' button a Warning message is getting generated 'The sales document is only valid until 09.12.2008'. Now i have to change this into Error message instead of Warning Message.
i used User Exits mv45afzz,MV45AFZA,MV45AFZB. But the debugger is getting started only after Warning message got generated.Is there any User Exit for which debugger gets started when i give the Contract and then Click on 'Copy' button. Please Suggest.
Thanks and Regards
K SrinivasHi,
One idea. Go to VTAA (copy between sales docs) and create a new VOFM where you manage the copy control. Set a warning/error message in the new VOFM (in your range number), and try it.
Regards,
Eduardo
Edited by: Eduardo Hinojosa on Dec 10, 2008 3:58 PM -
User exit for Dismantle equipment
Hi,
I am using Structure tab of tcode IE02 for a superior equipment which has 3 equipments below it.
I Click on the icon next to it and it takes me to the 3 sub equipments. Now whn i select a subequipment and click on dismantle...it will remove tha equipment...now i click on back...
i come to the main screen..
I am using exit EXIT_SAPMIEQ0_001...
and here i want to check if user has deleted any sub-equipment.
I am able to retrive all the subequipments which were previously there...but not able to find what equipments the user has dismanteled..
Is there any other exit?Hi Himanshu,
Just check for the following user exits. These are the user-exits for T-Code IE02.
IEQM0001 Add. checks for equip. installation at functional locations
IEQM0002 Additional checks for definition of equipment hierarchies
IEQM0003 Additional checks before equipment update
IEQM0004 Object is allowed for contract partner (Order->MaintCont.)
IEQM0005 Object allowed for SD contract (MaintContract->MaintCont.)
IEQM0006 Object allowed for SD contract (Maintain maintenance cont.)
IEQM0007 Check/change manufacturer field in equipment master
Hope this will help you.
Regards,
Nitin. -
User Exit for getting Purchase Requisition Release Strategy
Hi Experts,
When a user creates a PR I need to know the user exit I need to implement so that the First Approver (Processor) text in the Release Strategy is populated from a custom table. I have seen that the field is MEREL_S_GRID1-STEXT. I also need to know if I can implement a user exit so that it pulls the release strategy for a PR for assets (Acct Category A) since it is pulling for Acct Category K (Cost Centre) and the Release Strategy tab is appearing in this case.
Kind Regards,
DarlingtonHi Meenakshi,
Thanks for the very useful answer. It has given clues on how to resolve this issue. I have resolved this issue for the Asset item category using the following thread: user exit for requisition release strategy, and also SAP Note 365604.
However, I have another issue, the release strategy for Stock Items, (item category blank) is not pulling through. I need to use the same method above but would like to know how it determines the funds centre for a specific stock item. I couldn't find where that is implemented in the material master and I need info on how to determine the account assignment for stock items based on the funds centre.
Regards and Thanks. -
BAPI or USER EXIT for MIRO: Change PO reference amount (on-line)
Hi, I need to find a BAPI or USER EXIT for TX MIRO to change/modify the PO reference amount for the selected positions (using the given checkbox) just after selecting them (when pressing ENTER). Any ideas? Thanks.
Hello Suman,
Please follow this steps to get the list of Userexits for the TCODE MIRO read there short description to get the appropriate EXIT.
Steps.
1. Goto the Tcode
2. System-> Status.
3. Copy the program name, find the package for the program.
4. Go to SMOD (tccode) press F4 -> Click on "Information System" Push Button->
Enter the Package name-> and press the enter button.
5. Now you get the list of Userexits. Need to select one by looking into its short description.
Hope this solves your issue,
Cheers,
Suvendu -
Hi experts,
I have question regarding user exit for IW28 tcode:-
1) When you goto IW28 and double click on any "Notification" which does not have "Functional location".
2) Then on "Notification" TAB if you put "Functional location" in "Functional loc." field then it automatically changes Cost Center, WBS Element and SettlementOrder fields in "Location" TAB, and these fields will be changed correspondence to the "Functional Location" entered in "Notification" TAB.
But we don't want that. In "Location" TAB we don't want these three fields Cost Center, WBS Element and SettlementOrder to get updated whenever we enter "Functional Location" in "Notification" TAB.
We want "Location" TAB fields should have what ever it had initially and not changed whenever we enter Functional Location in "Notification" TAB.
I am looking for some user-exit to stop this. Please help me for 1) which user exit i should use and 2) how to proceed.
Thank You Very Much!!
.malahi mala,
in iw21/iw22 or iw28 when ever you you change the tech object f.loc or eqpt that data in the location tab and some more data like catalogue profile are taken from the f.loc /eqpt master records and when ever you change the tech object this data again pulled fom the respective master record but if you dont want thse fields to be updated then do not maintain in ie02/il02 ... but i suggest you to maintain this data as it would be easy in processing ..
regards
pushpa -
Hi Gurus,
I need your assistance for the below requirement.
In AS01 ( Create Asset ), while creating ASSET the Equipment should be created. This syncronization is already done in the customization.
1.The requirement is the Equipment Field in the ALLOCATION Tab should automatically get the Asset Number Value once we click the ALLOCATION Tab.
2.And also the Equipment should be created only if the Evaluation Group 2 is 'Y'.
i checked all the Exits and BADI's available. But my requirement is not met. please help me in this.Hi,
Transaction Code - AS01 Create Asset Master Record
Exit Name
AAPM0001 Integration of asset accounting and site maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Reward points if useful....
Regards
AK -
Is there a user exit for PP01. I want to trigger something off the back of a position getting created.
List of exits
Enhancement/ Business Add-in Description
Enhancement
RHGB0001 Function Group RHGB Customer-specific field (list)
RHIV0001 OrgManagement: Customer-specific number assignment
Business Add-in
HRBAS00_T77S0 HR: Switch Attributes
HRBAS00_STRUAUTH Business Add-In for Structural Authorization
HRBAS00_SEARCH_EXCL Exclusion of Individual Search Help
HRBAS00_SEARCH HR: Object Search
HRBAS00_RHBAUS00 Business Add-In for RHBAUS00
HRBAS00_RELAT HR: Exit for Relationships
HRBAS00_GET_PROFL Determine user profile from table T77PR
HRBAS00INFTY Update By
ARC_BC_HROBJ_WRITE Archiving Object BC_HROBJ: Additional Table Entries
ARC_BC_HROBJ_CHECK Archiving Object BC_HROBJ: Archivability Checks -
Hi All,
I am using the user exit <b>EXIT_SAPMP56T_002</b> for travel management, to raise a message. The issue i am facing is, the message has to be displayed only if the user saves the transaction, if he clicks the approve button it should not raise this message.
Inside the user exit sy-ucomm is getting cleared, because of this i couldnot able to differentiate, is there is any way to differentiate the user command, your inputs pls.
Thanks,
GarDear Duxton,
Thanks for your reply, I checked the table AEND, but its not providing any fields to depict the user command. So this table is also not handy
Thanks,
Gar -
Hi Experts,
My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
& this invoice no. alsp get created.
So can anybody plz tell me in which user exit i have to put my code ???
I have tried with RV60AFZC.But it is not working.
My code is
FORM userexit_pricing_prepare_tkomp.
* TKOMP-zzfield = xxxx-zzfield2.
* structure for vbak
TYPES:BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln,
audat TYPE vbak-audat,
END OF ty_vbak.
*likp structure
TYPES:BEGIN OF ty_likp,
vbeln TYPE likp-vbeln,
lfdat TYPE likp-lfdat,
END OF ty_likp.
*vbrp structure
TYPES:BEGIN OF ty_vbrp,
vgbel TYPE vbrp-vgbel,
vgpos TYPE vbrp-vgpos,
aubel TYPE vbrp-aubel,
aupos TYPE vbrp-aupos,
END OF ty_vbrp.
DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
it_likp TYPE STANDARD TABLE OF ty_likp,
it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
DATA:wa_vbak TYPE ty_vbak,
wa_likp TYPE ty_likp,
wa_vbrp TYPE ty_vbrp.
***** take reference document no & delivery no. *****
LOOP AT xvbrp.
wa_vbrp-vgbel = xvbrp-vgbel.
wa_vbrp-vgpos = xvbrp-vgpos.
wa_vbrp-aubel = xvbrp-aubel.
wa_vbrp-aupos = xvbrp-aupos.
APPEND wa_vbrp TO it_vbrp.
ENDLOOP.
IF it_vbrp IS NOT INITIAL.
SELECT vbeln audat FROM vbak
INTO TABLE it_vbak
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-aubel.
SELECT vbeln lfdat from likp
INTO TABLE it_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
ENDIF.
**** check for invoice date with order date *****
LOOP AT it_vbak INTO wa_vbak.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
ENDIF.
ENDLOOP.
**** check for invoice date with delievery date *****
LOOP AT it_likp INTO wa_likp.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
ENDIF.
ENDLOOP.
ENDFORM. "USEREXIT_PRICING_PREPARE_TKOMP
Thanks & Regards,
Anagha DeshmukhHello,
These are the user exits for the tcode.
J_3RSINV Export sales
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Keep the break point and try in the debugging in each and every exit and see which user exit is triggred. -
How to find the exact user exit for our requirement?
Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
<b>How to find the exact user-exit for your requirement.</b>
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
<b>The procedure to find the package name.</b>
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
<b>Checking if the user-exit is getting triggered or not.</b>
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad
Maybe you are looking for
-
Hey all! I was blessed to recieve a free trial to a site called videoblocks.com where I can download videos to use for my project for a week. I'm trying to get the most out of the opportunity and get the videos I need in my project, but I need adv
-
How do I turn off the 'low ink level warning' message that appears on boot up? I know the ink is low, but the message appears every boot up, and I do that five or six times a day. I have a deskjet 3940. Thank you!!
-
1/2 Street Address unsupported in reminder Locations
I live at a 1/2 Street Address. For example: "55 1/2 Anywhere St.". This is my address in contacts on 10.8 and iCloud. When I try to set a location based reminder to remind me when I am "Home" my address is read as "2 Anywhere St.". Everything be
-
Auto time setting is missing in my iphone
I am travelling a lot and I have to adjust the time manually in each new city. I read that i can let iphone to update the time automatically but I did not find the option to do that under settings/general/date and time. is there any patch or update t
-
Applications for creating fillable forms
I work for a real estate agent and we need to be able to either create a form or scan an existing one (that we previously hand wrote on) and create fillable fields in this form. I need to be able to e-mail them to the office when they are completed f