User exit for me29n with project wise

hi gurus,
is there any user exit for me29n .. i want to Restrict my authorizastion based on project, that is only user from that particular project should be able to release.. is it posible
With Regards,
Shakthi Raj N.
<<Phone number removed>>
Edited by: Matt on Jan 28, 2009 10:02 AM

Hi
To find out the user exits:
Goto System->status. Obtain program name.
In Attributes obtain Package name.
Goto tcode CMOD. Specify the pkg and pgm naem. It will give you a list of user exits.
Hope this helps
Regards,
Jayanthi.K

Similar Messages

User exit for 0INFOPROV with InfoCube in BWA

Hello Everyone,
We recently added few InfoCubes into BWA and due to the reporting requirements and the way the reports were designed we had to create a user exit for 0INFOPROV in order to populate the InfoCube name based on the selection criteria for the report.
But when we run the report, the report is ending up with an error message and we are not able to execute any queries on top of that multiprovider with the user exit embedded.
If we remove the user exit and hard code the value for 0INFOPROV it works fine.
Can anyone please let me know how you guys have dealt with the user exit for BWA.
Let me know if additional details are to be provided.
Thanks
Dharma.

Hello Vitalty,
Thanks for looking into the message.
The issue is, when we have a restricted keyfigure which has selection on 0INFOPROV to populate the InfoCube name through user exit the query is ending up with error messages.
The error messages state
"Error Error while reading data; navigation is possible
Error Errors occurred during parallel processing of query 21, RC: 3
Error The following errors occurred during parallel processing of query 22
Error Error reading the data of InfoProvider ZCSLSMR10$X
Error Inconsistent input parameter (parameter: <unknown>, value <unknown>)
Thanks for your time.
Any help would be really appreciated.
Thanks
Dharma.

Question - SD user exit for Billing with multiple sales orders

We have a situation where we are summarizing Accounting Billing document updates via OBCY, transaction type VBRK .
We will also have multiple sales orders per billing document.
One of our accounts is a COGS- clearing account which will post for both delivery and billing documents.
Our goal will be to clear the COGS-clearing account after the delivery and billing has occurred.
One alternative being evaluated is to update the assignment field ( bseg -zuonr) for the sales order.
To do this, one of the SD user exits , perhaps SDVFX008, would be necessary to update the sales order from vbrp-vbel2 to bseg-zuonr.
I am concerned about
1) will the update work
2) what will be the effect on summarization
If we try to implement the user exit , would we be successful to just update the assignment field for just the COGS accruall account. _Therefore the next effect is that AR,Rev, etc, would summarize , but the COGS clearing would break out due to the update to the assignment field..
Does anyone have any experience similar to this situation.
Thank you,
Jeff

Hi
You can use SDVFX008 or FI Substitution exit RGGBS000 (Form U100)
You can very well update the required GL (COGS Clearing) with the Sales order No... However, how exactly it would behave upon summarization, I am not sure about that.. you need to develop that and see
In the COGS account during PGI, Sales Order No is populated always in the field "Sales Order"... In your case, the COGS clearing account should be having sales order no populated...
So, if you are successful to populate Sales Order No during billing in the "Sale Order" Field for the COGS clearing account, that should also suffice...
or See if you can have relevant sort key in FS00 for the COGS clearing account so that Sales order no is always populated..
Regards
Ajay M

User exit for XD01 with delivery priority

Hi ,
I am using a user exit EXIT_SAPMF02D_001 for customer master.Below is the piece of code .I am just displaying message based on delivery priority field in the customer master .
But the probleam is when user only change the value in delivery priority field then only my message should come .But now my logic executes when ever no changes in the delivery priority field also and any touch other than this field also getting the message.
Means the value in the delivery priority field not refreshed in the customer master screen .Thats why the message is coming any time when not touching the field also.
so can somebody suggest what to do?My logic should work only when delivery priority field only changed.
TABLES:tpakd.
DATA:l_lprio TYPE lprio,
     l_kztlf TYPE kztlf,
     l_antlf TYPE antlf.
DATA:l_lp(2) TYPE c VALUE '03',
     l_kz(1) TYPE c VALUE 'B',
     l_an(1) TYPE c VALUE '1'.
SELECT SINGLE * FROM tpakd
                INTO tpakd
                WHERE parvw = 'WE'
                  AND ktokd = i_kna1-ktokd.
IF sy-subrc = 0 .
MOVE i_knvv-lprio TO l_lprio.
MOVE i_knvv-kztlf TO l_kztlf.
MOVE i_knvv-antlf TO l_antlf.
IF l_lprio = l_lp AND ( l_kztlf NE l_kz OR l_antlf NE l_an ) .
    MESSAGE w534(zm).
    ELSEIF l_lprio IS NOT INITIAL
            AND ( l_kztlf IS NOT INITIAL
            OR l_antlf IS NOT INITIAL
            OR l_antlf NE '0'
            OR l_antlf NE '9' ).
    MESSAGE w534(zm) .
ENDIF.
ELSE.
EXIT.
ENDIF.

HI
I think something doesn't sound good in this control
ELSEIF l_lprio IS NOT INITIAL
AND ( l_kztlf IS NOT INITIAL
       OR l_antlf IS NOT INITIAL                  "<-------
       OR l_antlf NE '0'
       OR l_antlf NE '9' ).
    MESSAGE w534(zm) .
ENDIF.
The control for L_ANTIF seems to be always valid, probably you should use AND insted of OR
ELSEIF l_lprio IS NOT INITIAL
AND ( l_kztlf IS NOT INITIAL
       OR ( l_antlf IS NOT INITIAL                  "<-------
       AND l_antlf NE '0'
       AND l_antlf NE '9' ) ).
    MESSAGE w534(zm) .
ENDIF.
Max
Max

User Exit for ME52N with Purchase Requisition number & line item number

Does anyone know which user exit I could use to get at the purchase requisition number and line item number when I am trying to change a PR. I see various exits with im_req_item but when I code a popup in the include it is not appearing. I am just not finding the right exit.

You can use enhancement MEREQ001, function exit EXIT_SAPLMEREQ_005. This enhancement description gives impression that it can only be used if you have custom fields but it can be used even when you don't have custom fields.

User Exit for TCode CJ20N to populate Project system user fields

Hi team,
need one support from your side..
I am looking for User Exit for TCode CJ20N to populate Project system user fields on SAVE.
I have found
Enhancement CNEX0001
Short text PS: User field
which is exactly suiting my req...as it has USER Fields (USR08/USR09 )in export paramters..
BUT it is not triggering on SAVE,,
Any hint or is any other user exit/badi which have USER Fields in export paramters.
Warm Regards
Krishan

Hi Krishnan,
If you want a custom tab that contains User defined fields at Project level then you have to use CNEX0006 user exit. Before this you must declare your fields using the CI include CI_PROJ in the PROJ table.
If you want a custom tab that contains User defined fields at WBS level then you have to use CNEX0007 user exit. Before this you must declare your fields using the CI include CI_PRPS in the PROJ table.
In the PBO function module exit of these exits you must use the following statements as the first statement.
MOVE-CORRESPONDING sap_proj_imp TO proj.
MOVE-CORRESPONDING sap_prps_imp TO prps.
In the PAI function module exit of these exits you must use the following statement as the last statement.
MOVE-CORRESPONDING proj TO cnci_proj_exp.
MOVE-CORRESPONDING prps TO cnci_prps_exp.
The remaining programming as in the case any Screen Exit.
Regards,
Abijith

User exit for CJ20n (to check budget when create Reservation) for project

Dear All,
Plz advice, is there any user exit for CJ20n(project builder) in order to check available budget when we create reservation under a network/activity for a project?
Many thanks in advance.

Hi,
Budget functionality is available against actual / commitment items, but n't against reservation of materials as there cane be reservation at projects or plant level. Morever there is no such user exit in CJ20N.
If you can make developments of reservation agsinst network as committments items then budget functionality may work in that case.
Hope this will help you.
Regards,
Rakesh Pradhan

User Exit for Purchase Order Release Strategy

Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
Mick

Hi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren

How to find user exits for a specific field

hi,
    How can we find a user exit for a specific fields .
as i know Three ways to search user-exits
1. SE80 look includes in a packages with name user-exits
2. by zreport which will fetch user-exit in a T-CODE
3. SMOD
but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
Please suggest me.
Thanks and Regards ,
Rahul Singh.

Hi Rahul,
Here is the procedure to create field exits.
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
Step 2: Go To Field Exit Transaction
u2022     The transaction to create field exits is CMOD.
u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
Step 4: Create Function Module
u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
u2022     You can add an identifier (an underscore followed by a single character ).
u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
u2022     Here you will add your desired functionality for the field exit.
u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
u2022     After coding the function module, you must remember to activate it.
u2022     Use the Function module -> Activate menu path to activate the function module.
u2022     At this point, you can return to the field exit transaction.
u2022     You should be able to 'green arrow' back to this transaction.
u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
u2022     Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
u2022     This step is only needed if you want to make a field exit local.
u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
u2022     In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
u2022     The field exit must be active for it to be triggered by the system.
u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
and in the coding part, You can write your logic to display the output of that field. and activate it.
once you complete the above,
Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
Hope it helps.
Regards
Radhika
Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

User exit for save button in transaction code CBIH82

HI All.
i have got an issue with finding of user exit for transaction code cbih82.
my functional consultant want me to go for exit CBIH_LB39_UE_POST_COMMIT (se37) but i cont find any user exit in this function module as it is triggering when i click on save at cbih82 in debugging.
but i cont find any user exit in this CBIH_LB39_UE_POST_COMMIT.
so could any one help me in this issue for finding user exit which should trigger when i click on save at cbih82 tcode.
will be waiitng for a good answer.
bye.
regards.
seetaram.

check in smod
user exits for CBIH82
Exit Name           -- Description
EHSIAHM1           -- EH&S: Menu Exit 1 for Incident/Accident Log Header
EHSIAHM2           --- EH&S: Menu Exit 2 for Incident/Accident Log Header
EHSIAPM1           --- EH&S: Menu Exit 1 for Incident/Accident Log Person
EHSIAPM2           -- EH&S: Menu Exit 2 for Incident/Accident Log Person
EHSMPHM1        --   EHS: Menu Exit 1 for Measurement Project Header Data
EHSMPHM2         -- EHS: Menu Exit 2 for Measurement Project Header Data
EHSMPJM1          -- EHS: Menu Exit 1 for Measurement Project Measurements
EHSMPJM2          -- EHS: Menu Exit 2 for Measurement Project Measurements
EHSSARA            -- EHS: Check/Edit Lines in SARA List Before Printout
Salil...
Edited by: salil chavan on Nov 19, 2008 8:23 AM
Edited by: salil chavan on Nov 19, 2008 8:25 AM

User Exit for MIR7 Simulate

Hi all,
        I need to implement a user exit for MIR7 similation . requirment is when user click on button simulate at the time of MIR7 the total amount of all line items should be displayed in popup or any small window. therefore any user is there for do that . and give some tips for inplement that. actualy i am new to user exits.
Thanks in advance
Jitendra

hi,
You can use tcode 'smod' to navigate to one of these enchancement and choose the best EXIT Fm to do the calculation .
Exit Name           Description
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
PS : to create the FM for this user exit , you can use tcode CMODE to create new project with the suitable enhancement and create the code for your calculation.
Thanks

User Exit For MRP RUN

Hi all ,
I am using the user exit for the Plant A - MRP by MRp Type.
and i would like to use the same enhancement in the Different project in Plant B MRP by Material Group , But the sys is not allowing to use the same enhancement saying the enhancement is already used in the Project .
Whether i have to code in the Same project or i can create TWo project with the same enhancement ?
Regards

Please understand, if you are changing the project for a different plant then you need to create same enhancement. If you are working on same project, you need not to create another code, you can get results by simply changing the plant name.
I hope, I have cleared.
cheers!!!

User exit for different modules

Hi Everybody,
I want to search for all User Exits for different moldules.
Like for SD, MM.....how can we find that?
I know there is some way , Goto Se80, then.....
Please help me guys, its Urgent....
Will be rewarded.
Thanks in advance.
Regards,
Seevangi

Hi,
Go To Se84..
Give Program Name .
Display.
In the Tree U Will Have Option Called Enhancements
This Shows What R the Enhancements Available For That Program Or Transaction
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

User exit for the release of Purchase Order

Hi Friends,
I am searching for a user exit which should trigger at the time of Purchase Order release in ME29n transaction.
If anyone can help me for the same....!!!
I need the exact exit which triggers at the release of PO....
Points will be rewarded for the needful replies.
Regards,
Mandeep.

HI,
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
USE THIS PROGRAM TO GET ANY USER EXIT BY GIVING THE TCODE.
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
REGARDS,
PRIYA.
Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:21 AM
Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:40 AM

User Exit For Printing in FB50

Hi
Please can someone give me a user exit for transaction FB50, the user exit needs to be late in the process/transaction and I want to be able to see the data and print it. Going to do printing through abap.
Basically I want to trigger automatic printing for the transaction.
Thanks in advance

u can implement this user exit RFKORIEX , which allows automatic printing.
steps to implement:
go to CMOD: create a project with name: Z_Print.
and clikc on enahncement assignment and assign 'RFKORIEX' .
and click on components.
again double clikc on fun. exit: EXIT_RFKORIEX_001
then u can able to see INCLUDE ZXFKOU01.
click double click on ZXFKOU01.
write the foll. code:
e_FINAA-NACHA = assign value of tranmission type/medium
activate it...
come back to projectand activate the entire project...
please ensure that the component 'RFKORIEX' should not be used by any other program. if its used by any other program, deactive that project.

User exit for me29n with project wise

Similar Messages

Maybe you are looking for