User Exit for MQC functionality

Hi All,
Can anybody suggest if some user exits are available for MQC functionality?
regards,
Mohit Goyal

Hy,
Program is LCOMLF01 - Calling up Material Quantity Calculation
XCOM0001 - User exit: Material quantity calculation
Function Module is EXIT_SAPLCOML_001
INCLUDE ZXCOMU01
Regards,
Dhaval

Similar Messages

Java User Exit for Variant Function logic in CRM

Hello Experts,
We have implemented Variant configuration in ECC with some variant functions / function modules. Now we have to implement the corresponding Java class in CRM for the knowledge base & version to work.
Can anyone help me out to find the correct userexit where I need to implement this Java class consisting the variant function logic.
Thank You
Satish

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

User exit for funtion module

hi ,
i need user exit for the function module 'J_1I7_USEREXIT_CHEQUENO_CERT'
i have found the package in which this is stored.Then by giving the 'J1I2' in 'cmod ' i have to get the exit.But i'm not getting.Even by using tcode -'se80' i have tried but its giving a message ''No objects correspond to the selection criteria''.
pls tel me if there is any other method where by which i can find out the exit.
its urgent
thanks&regards
prasad

Hi Vara prasad,
Finding the user exist or customer exist by using the package is not exact way because in that package called 'J1I2' i has not containing the function module J_1I7_USEREXIT_CHEQUENO_CERT only and also this pakage may be contains other tcodes or function modules etc.. that is the reason you get some user exists by using the package.
Find the userexists by using the follwoing way:
Go to SE37 -> open the function module J_1I7_USEREXIT_CHEQUENO_CERT in display mode -> press cnt+F button and search the string PERFORM USER Or CALL CUSTOMER-FUNCTION then you are able to get all the user exists and customer exists for the function module.
Regards,
Mahi.

User exit for ME21N (Not functional or customer exit)

Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PM

Hi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it.

User exit for Function Module

Hi,
I have a Exit function module EXIT_SAPLCVV1_003. i wrote my code in the include and i dont know how to activate it in CMOD. i dont have the user exit name. can anyone tell me how to find user exit for function module.
Regards

hi
you should find the enhancement name for your function module exit.
go to CMOD Utilities->SAP Enhancement->extended selection->
give the program name(SAPLCVV1) in Component name field and execute.
it will display the enhancement name.Afterwards u should create the enhancement project.
Steps to create enhancement Project:
1.Goto CMOD.
2.Give project name.->Create
3.Assign the enhancement using the option.
4.select Components and choose change.go to ur code and activate.
5.activate the exit
6.activate the enhancement.
Cheers,
Abdul Hakim
mark all useful answers..

GL Account User Exit for all FI transactions

Hi Experts,
We have to create a Ztable and it stores GL bank account principal amount.
Ex: 130121 (SCB Bank) - Rs.10,00,000.00
In SAP , for the same GL account closing balances will available in FS10N of each month.
Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
Now, the requirement is..
I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
Hope u understood else pls let me know by your replies.
Pls advise.
thanks & regards
sankar.

Hi..
In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
Here u can write the code u want.
Regards,
Vishwa.

User Exit for saving Invoice

Hi Experts,
My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
& this invoice no. alsp get created.
So can anybody plz tell me in which user exit i have to put my code ???
I have tried with RV60AFZC.But it is not working.
My code is
FORM userexit_pricing_prepare_tkomp.
* TKOMP-zzfield = xxxx-zzfield2.
* structure for vbak
TYPES:BEGIN OF ty_vbak,
 vbeln TYPE vbak-vbeln,
 audat TYPE vbak-audat,
 END OF ty_vbak.
*likp structure
TYPES:BEGIN OF ty_likp,
 vbeln TYPE likp-vbeln,
 lfdat TYPE likp-lfdat,
 END OF ty_likp.
*vbrp structure
TYPES:BEGIN OF ty_vbrp,
 vgbel TYPE vbrp-vgbel,
 vgpos TYPE vbrp-vgpos,
 aubel TYPE vbrp-aubel,
 aupos TYPE vbrp-aupos,
 END OF ty_vbrp.
DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
 it_likp TYPE STANDARD TABLE OF ty_likp,
 it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
DATA:wa_vbak TYPE ty_vbak,
 wa_likp TYPE ty_likp,
 wa_vbrp TYPE ty_vbrp.
***** take reference document no & delivery no. *****
LOOP AT xvbrp.
wa_vbrp-vgbel = xvbrp-vgbel.
wa_vbrp-vgpos = xvbrp-vgpos.
wa_vbrp-aubel = xvbrp-aubel.
wa_vbrp-aupos = xvbrp-aupos.
APPEND wa_vbrp TO it_vbrp.
ENDLOOP.
IF it_vbrp IS NOT INITIAL.
SELECT vbeln audat FROM vbak
 INTO TABLE it_vbak
 FOR ALL ENTRIES IN it_vbrp
 WHERE vbeln = it_vbrp-aubel.
SELECT vbeln lfdat from likp
 INTO TABLE it_likp
 FOR ALL ENTRIES IN it_vbrp
 WHERE vbeln = it_vbrp-vgbel.
ENDIF.
**** check for invoice date with order date *****
LOOP AT it_vbak INTO wa_vbak.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
 MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
ENDIF.
ENDLOOP.
**** check for invoice date with delievery date *****
LOOP AT it_likp INTO wa_likp.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
 MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
ENDIF.
ENDLOOP.
ENDFORM. "USEREXIT_PRICING_PREPARE_TKOMP
Thanks & Regards,
Anagha Deshmukh

Hello,
These are the user exits for the tcode.
J_3RSINV Export sales
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Keep the break point and try in the debugging in each and every exit and see which user exit is triggred.

HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT

Hy,
HOW TO CREATE A USER-EXIT FOR MB31
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.

Hi Rawat,
 You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

User exit for merging the credit limit in different credit control area.

Dear All,
Please provide user exit for the merging the credit limit in different credit control area as well as logic for the same.
I have to merge the overall credit limit of the customer for some divisions. At this time in one company code we have created 9 credit control area as per product line. While creating customer master data and Credit management (FD32) user has assigned the different limit with respective to credit control area e. g Customeru2019s total limit assigned is 10 laks. For credit control 1100 Limit is Rs. 3 laks and for credit control area 2200 limit is 7 laks. Now the user wants to merge the credit limit for only above two credit control area. The sales orders should get created in any credit control area up to 10 laks.
Regards,
Suresh

Dear Damodhar/All,
Would you please explain me prerequisite setting from functional side for these user exit?
I want complete functional setting prior to ABAP application so that it work properly post configuration.
Regards,
Suresh

User Exit for Partner Determination in VA01, VA02 transaction ( Sales order

Dear All,
I have an issue in which i need to determine partner for every change in ship to party both at header and item level during sales order creation or change.
Can you please suggest an appropriate user exit for the same.
I have tried
EXIT_SAPLV09A_003
EXIT_SAPLV09A_004
but they get triggered only when we enter into VA01 transaction and not when the ship to party is manually changed.
If possible i want to avoid MV45 exits as there are chances of regression due to too many different functionalities already present in my system.
In worst case scenario please specify the place wherein i need to code in MV45 exits and what are the fields i need to change.
Most probably i filtered out on "USEREXIT_MOVE_FIELD_TO_VBAP" but i am not 100 percent sure on this, please suggest.
Thanks in advance
Ronak

Hi,
please use User exit function: EXIT_SAPMV45A_003
Put your coding in include: ZXVVAU05 (create it by double clicking, if not already created) and activate.
Regards,
Sanjay Gogikar

Logic and User Exit for Availabilty Check in Sales Orders,

Hi All,
I have a requirement of creating a Sales order from an Inbound IDOC. Before saving i need to do all the validations for the sales order including the availabilty check for the sales orders. If it is not fulfilled i need to reject the sales order creation.
I am trying to search for the logic for the availabilty check of the sales order but i am not able to find one. Please help me out with that and also i need the user exit for the availabilty check for the sales orders. Please help me out with that one too.
Regards,
Sharadendu

See this function Module for message type ORDERS
IDOC_INPUT_ORDERS all validations are there in this Function Module .
Please reward if useful.

Badi/User Exit for VF01

Hi Experts,
Please understand my issue/requirement that, I have to make the item conditions tab in display or deactivate mode to prevent users to change or create the price or conditions while posting VF01.
As std, system allows users to create or change the prices/qts and also add new conditions. My client needs to make it as display mode for all type of postings in VF01.
Please guide me, how to arrive it through Exit or Enhancements.
thanks & regards
Sankar.

Hi,
Try these steps to find the BADI.
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
These are exits in VF01.
SDVFX001            User exit header line in delivery to accounting
SDVFX002            User exit for A/R line in transfer to accounting
SDVFX003            User exit cash clearing in transfer to accounting
SDVFX004            User exit G/L line in transfer to accounting
SDVFX005            User exit reserves in transfer to accounting
SDVFX006            User exit tax line in transfer to accounting
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
J_3RSINV            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
Hope this helps u.
Thanks.

User Exit for MQC functionality

Similar Messages

Maybe you are looking for