User exit for pricing at billing level

Hi ,
can you pl. suggest me,which user exit i can use for below scenario.
Create a new user exit attached to pricing procedure ZXTNIC in order to exclude the conditions YTN1 & YTN2 from the calculation of the net sales value and include the value of the conditions YTN1 & YTN2 to the calculation of the Tax vale.
From pricing procedure ZXTNIC need the net value to be till line 500 only and exclude the value of the conditions YTN1 & YTN2
BACKGROUND
Inter-company invoice is not calculated correctly in terms on the net sales value. The calculation of the net sales value is correct as some conditions are included in the calculations which must be excluded.
The reason for creating the user exist is that any change in the pricing conditions class can not be used to exclude them from the net price, without totally changing the concept behind the conditions (new conditions, new access sequence in taxes, IC changes and so on).
Regards,
Jayaram

First read the BADI online documentation and then [Implement thef BAdIs in the Enhancement Builder|http://help.sap.com/saphelp_nw04s/helpdata/en/b2/873842134bad04e10000000a1550b0/frameset.htm], put some break-point to check the data sent/received in debug.
Regards,
Raymond

Similar Messages

Need Help for User Exit for Pricing

Dear ABAPers
I created a user exit for pricing where I am comparing a condition type (manually entered(ZD01)) to another condition type(YD01). If the entered value is more than the other condition type than pricing should not be updated.
RATE = 0.
IF KOMP-ZZVBTYP = 'C'.
IF KOMP-PRSFD = 'X' OR
 KOMP-PRSFD = 'A'.
IF KOMV-KSCHL = 'ZD01'.
 LOOP AT XKOMV WHERE KSCHL EQ 'YD01'.
 KOMP-KZWI2 = ( XKOMV-KBETR / 10 ).
 ENDLOOP.
 RATE = KOMV-KBETR / 10.
 IF ( RATE <> 0 ) AND ( RATE < KOMP-KZWI2 ).
 MESSAGE W991. "Maximum Allowed Discount Has Exceeded !!!!
 CLEAR KOMV-KBETR.
 CLEAR KOMV-KWERT.
 MODIFY SCREEN.
 ENDIF.
ENDIF.
ENDIF.
ENDIF.
It is giving me the message but it is also updating the pricing. I want not to be updated. So in place of modify screen i need to reset pricing procedure.
I need a function module or a abap key word which can reset the pricing procedure.
Thanks in Advance.
regards,
MAM

as per i can understand you are coding in user-exits ,.. so if you are giving that
message 'Maximum Allowed Discount Has Exceeded !!!!' type 'E'.
i think it will work. I think there is no way to stop the processing without type e.
regards
shiba dutta

User Exit for Pricing Condition

Hi all,
I wanted to change the values of few fields in the communication structure KOMK and KOMP for Delivery Order when pricing is being processed.
Is there a User exit for doing the same.
Regards,
Rupesh.

hi,
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields.
The fields which are not in either of the two tables KOMK and KOMP
cannot be used in pricing .Sometimes a need arises when the pricing
is to be based on some other criteria which is not present in the form of fields in either of the two tables.
This problem can be solved by using USEREXITS which are provided for pricing in SD.
Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP
program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely
created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that
has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose
includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved.This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Hope this helps, Do reward.

User exit for pricing to calculate net sales value and tax at billing level

Hi,
Can anyone give the solution for below thing.
I have written the code for to calculate the net sale a value and tax value based on condition types YTN1 & YTN2 and with pricing procedure "ZXTNIC" under user exit "userexit_field_modification" in include program LV69AFZZ
Calculation as per below
FD:
The user exit will run on the values of the line item and the header of the pricing conditions
The user exit will subtract the current net value from the value of the conditions YTN1 & YTN2, also the Tax value will be added to the value of the conditions YTN1 & YTN2.
Need the Net value = 8,032 and not 8,882 " here 8832 value is before calculation
This value will be calculated as follows = Current Net u2013 YTN1 u2013 YTN2 = 8,882 u2013 0,773 u2013 0,077 = 8,032
Need the Tax value = 2,395 and not 1,545 " here 1545 value is before calculation.
This value will be calculated as follows = Current Tax + YTN1 + YTN2 = 1,545 + 0,773 + 0, 077 = 2,395
When i will execute the VF01 transaction there in initial screen values are not updating automatically.Once we will select item line and then clicking on " item pricing condition" icon i.e., item level , then only the values are updating both in item level and header level.
But when we will execute the VF02 and VF03 the values are updating automatically as per condition.
So please suggest me is there any exit for this requirement.
Regards,
Jayaram

Hi,
You should implement your logic in VOFM Copying routine for billing document.
Regards
Prasenjit

User exit for pricing to calcumlate net sales value and taxat billing level

Hi,
Can anyone suggest me , which user exit i can used for below scenario.
Create a new user exit attached to pricing procedure ZXTNIC in order to exclude the conditions YTN1 & YTN2 from the calculation of the net sales value and include the value of the conditions YTN1 & YTN2 to the calculation of the Tax vale.
From pricing procedure ZXTNIC need the net value to be till line 500 only and exclude the value of the conditions YTN1 & YTN2
BACKGROUND
Inter-company invoice is not calculated correctly in terms on the net sales value. The calculation of the net sales value is correct as some conditions are included in the calculations which must be excluded.
The reason for creating the user exist is that any change in the pricing conditions class can not be used to exclude them from the net price, without totally changing the concept behind the conditions (new conditions, new access sequence in taxes, IC changes and so on).
FUNCTIONAL DETAILS
The user exit will run on the values of the line item and the header of the pricing conditions
The user exit will subtract the current net value from the value of the conditions YTN1 & YTN2, also the Tax value will be added to the value of the conditions YTN1 & YTN2.
Need the Net value = 8,032 and not 8,882
This value will be calculated as follows = Current Net u2013 YTN1 u2013 YTN2 = 8,882 u2013 0,773 u2013 0,077 = 8,032
Need the Tax value = 2,395 and not 1,545
This value will be calculated as follows = Current Tax + YTN1 + YTN2 = 1,545 + 0,773 + 0, 077 = 2,395
Regards,
Jayaram

solved

User exit for pricing in Sales Order

Hi Gurus,
I have a requirement while changing Sales Order and an Inquiry.Below is the requirement.
I have a custom filed at the Sales Order Item level as VBAP-XXXXX. When the user changes this value to a value (say abc) then the NET value in the Conditions tab of the line item should become zero and also the grid of the conditions tab should be displayed as zero.
I have custom item categories for which the Pricing (TVAP-PRSFD) is blank (No pricing). For this type of Item categories I can make the NET price s ZERO by implementing some custom logic in the user exit userexit_new_pricing_vbap. Since this item category is not relavant for pricing then when I carry out new pricing the net value is set to ZERO.
But for other item categories, this field (TVAP-PRSFD) is set to X (Pricing standard). For this item categories I cant make the NET value as zero.
So Can you please let me know the possibility of implementing the above mentioned logic?
Are they any user exit to update the pricing table KOMP?
Are they any user exit to change the TVAP-PRSFD value based on my requirements?
Is there any other way of implementing this logic irrespective of item categories?

Hi Vinod,
I am sending you my code please check it,
   if TKOMK-SPART = 10.
    if XKOMV is not INITIAL.
      clear v_JEXP.
    READ TABLE XKOMV with key kschl = 'JEXP'.
    if sy-subrc = 0.
      check XKOMV-kwert = 0.
      message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
      v_JEXP = 'X'.
    else.
      message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
      v_JEXP = 'X'.
    endif.
    if v_JEXP = 'X'.
XVBUV-MANDT = sy-mandt.
XVBUV-POSNR = '000010'.
XVBUV-TBNAM = 'VBAP'.
XVBUV-FDNAM = 'PRSOK'.
XVBUV-FEHGR = 20.
XVBUV-STATG = '06'.
XVBUV-FCODE = 'PKON'.
XVBUV-SORTF = 9999.
XVBUV-LFDNR = 0000.
XVBUV-UPDKZ = 'I'.
append XVBUV.
    endif.
endif.
endif.
Please suggest something to solve this.
Thanks and Regards,
Vicky.

User exit for pricing

Hi,
I have the requirement that while creating invoice the condition value should be manipulated for one condition type.
I used userexit_xkomv_bewerten_end. I am getting correct output but there is red mark for this means its not activated.
Olease do let me know whether it is corrct user exit or I need to implement some thing in the code.
Regards,
Sandeep

What does your pricing analysis log say? Why can't you use a custom pricing type (and userexit_pricing_rule) assigned to your item level copy control to control the re-pricing process?

User-exit for VF11 (Cancel Billing Document)

Hello Experts,
I am looking for user-exit or BADI for VF11 that will correct the period and year for profit center document and spec. purpose ledger.
The problem is that the period is corrected during creation of the billing document (VF01) but not during cancellation. The period for profit center document in VF01 is corrected in user-exit (ZXPCAU04, function EXIT_SAPLPCRW_002) and for spec. purpose ledger in BADI (implementation of FI_SL_BADI_POPER).
These objects are not invoked during cancellation - I have to create new implementations.
I was looking for some solution on the forum but nothing helped. I've tried to use one of these Uesr Exit / BADI for VF11 but it also haven't helped.
Thanks
Marek Jeszka

Hello Experts,
I am looking for user-exit or BADI for VF11 that will correct the period and year for profit center document and spec. purpose ledger.
The problem is that the period is corrected during creation of the billing document (VF01) but not during cancellation. The period for profit center document in VF01 is corrected in user-exit (ZXPCAU04, function EXIT_SAPLPCRW_002) and for spec. purpose ledger in BADI (implementation of FI_SL_BADI_POPER).
These objects are not invoked during cancellation - I have to create new implementations.
I was looking for some solution on the forum but nothing helped. I've tried to use one of these Uesr Exit / BADI for VF11 but it also haven't helped.
Thanks
Marek Jeszka

Required User Exit For Pricing

Hi Folks,
Do we have any user exit to modify the way SAP selects condition records for pricing?
Regards,
Chetan.

Hi Dubey,
Please try out as per given below:
If you goto the SAP Application hierachy (SE81)you can go down into individual modules.
Select the area you are interested. (It should turn yellow).
Choose Information System button.
Select Environment->Exit Techniques>Customer Exits--->Enhancements.
You should now belooking at a selection screen with the DEV classes filled in from the Application hierachy.
If you hit Execute you will get the exits for the selected part of the hierachy!
Have a play around with SE81 / Info system it can be very usefull in finding all sorts of interesting things!
Thanks,
Rajesh

User-Exit for Pricing Strategy on return order.

hi,
If we have scale pricing implemented for returns how to arrive at the
base price (Pr00) condition record value based on the (Ordered qty - Returned Qty) in this scenario which user exit we shall use??
Thanks in advance,
Regards,
B.Anandh

Use transaction VOFM, Formula, scale base and condition base.

User exit for pricing date determination

Hi Friends
I want to have a custom validation at pricing date determination at billing document creation. Please anybody can help me which exit available at VF01 for this purpose.
Regards,
Ramindu

Hello,
Check for the below link:
http://help.sap.com/saphelp_46c/helpdata/en/18/f62c7dd435d1118b3f0060b03ca329/content.htm
Prase

Are user exits in Pricing for CRM 7.0 implementable in ABAP?

Hi all,
I'm new in CRM. I'm interested in creating some user exits for pricing in CRM 7.0. I know it can be done in Java but I was wandering, since now the web AS is implemented in ABAP, if I could drop Java and use solely ABAP for user exits in pricing.
Thanks

Hi all, I am new to CRM....Can I not create a user-exit condition type in CRM using VOFM ? The reason is that we are comfortable in ABAP but not in Java. Kindly reply with your experience. Thanks

User Exits for Inbound Process

hi all
can any one please give some example user exits in inbound process and explain the omportance of user exits
Thank you,
Swapna

hi
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
Types of User exits
1. Menu Exits
2.Function exits
3.Table exits
4.Screen exits
5.Keyword exits
6.Field exits.
also refer to the links below.. can get more info on user exits
list of user exits
http://www.planetsap.com/userexit_main_page.htm
can also get the list of user exits thru..
Tcode: CMOD -> Utilities -> SAP Enhancements -> F8 Execute
User Exits Notes:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/8c5738ee806b0ee10000009b38f889/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
below are some of the useful invound and outbound userexits
IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
 ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
 ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
 ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
 ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
 ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
 ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
 ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
 ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
 MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
 MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
 MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
 MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
 MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
 VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
 VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
 VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
 VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
 VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
 VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
 VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
 VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
 LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
 MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
 V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
 V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
 V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
 V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
 V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
 V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
 CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
 CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
 VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
 VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
 VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
 VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
 F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
 F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
 F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
 F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
 F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
 F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
 F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
 FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
 FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
 F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
 VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
 VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
 VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
 RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
 RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
 RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
 MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
 MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
 FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
 FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
 FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
 FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
 FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
 FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
 FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
 FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
 FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
 FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
 MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
 MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
 MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
 MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
 MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
 WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
 MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
 SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
 MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
 MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
 VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
 VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
 VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
 VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
 VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
 VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
 VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
 VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
 VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
 VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
 VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
 MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
 MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
 MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
 MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
 VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
 VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
 VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
 VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
 VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
 VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
 VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
 VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
 VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
 VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
 VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
 WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
 MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
 MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
 MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
 WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
 SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
 SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
 WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
 FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
 FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
 VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
 VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
 VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
 VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
 VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
 VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
 VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
 VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
 VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
 VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
 VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
 VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
 VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
 VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
 VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
 VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
 VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
 VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
 VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
 VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
 V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
 V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
 V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
 V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
 V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
 V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
 V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
 V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
 V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
 V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
 V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
 V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
 V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
 MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
 MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
 BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
 BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
 V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
 V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
 V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
 V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
 V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
 V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
 V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
 V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
 V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
 MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
 MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
 MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
 MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
 MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
 MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
 MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
 MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
 MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
 WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
 WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
 WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
 WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
 WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
 WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
 WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
 WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
 WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
 WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
 WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
 WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
 WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
 WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
 WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
 WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72. ACCONF
Confirmation of IDoc processing from the application
 ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
 ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
 ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
 ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
 ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
 ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
 ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
 MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
 MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
 MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
 MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
 VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
 VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
 VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
 VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
 MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
 MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
 FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
 CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
 CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
 CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
 CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
 F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
 F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
 F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
 F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
 F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
 FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
 FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
 FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
 FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
 FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
 F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
 MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
 RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
 RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
 RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
 MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
 LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
 LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
 LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
 LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
 MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
 MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
 WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
 MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
 MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
 MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
 MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
 MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
 MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
 MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
 SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
 SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
 SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
 SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
 SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
 SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
 SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
 SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
 WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
 WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
 FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
 FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
 FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
 FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
 VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
 WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
 WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
 VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
 VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
 VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
 WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
 FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
 VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
 VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
 VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
 VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
 VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
 VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
 VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
 VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
 MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
 BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
 BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
 SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
 SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
 SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
 SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
 SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
 SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
 SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
 V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
 V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
 V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
 V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
 V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
 V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
 V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
 WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
 MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
 MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
 MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
 MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
 WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
 WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
 WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
 WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
 WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
 WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
 WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
 WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
 WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
 WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
 WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
 WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
 WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
 WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
 WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
 WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
 ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
 ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
 BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
 KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
 KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
===
User exits for Pricing.
1.USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ
2.USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
3.USEREXIT_FIELD_MODIFICATION
4.USEREXIT_FIELD_MODIFIC_KZWI
5.USEREXIT_FIELD_MODIFIC_KOPF
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
====
Reward if USeful
Thanx & regards
Naren..

User exit for output in VF02

Does anyone know of a user exit for the Sales Billing (VF02) that would allow me to manipulate the email address for email outputs. Currently the email address comes from the communciation tab on the customer master, and I want to be able to change it to come from the contacts tab in the cusomer master. I think the program used for the output is RSNAST00

Maybe in one of these Enhancements
VN000001                                Customer exits in output determination
VCOM0004                                Fill Output Communication Areas - Application V7
VCOM0003                                Fill Output Communication Areas - Application M1
VCOM0002                                Fill Output Communication Areas - Application E1
VCOM0001                                Fill Output Communication Areas - Application V6
Sorry, don't remenber which one is for printer, for fax or for mail.
Regards,
Raymond

User Exit for ERS (Evaluated Receipt Settlement ) while Creating PO

Hi All ,
i have a Specific Requirement ,
When ever an PO is created for ERS Vendors , The ERS check box at Invoice tab would be Ticked by default for specific document types ,
But for all other document type this ERS tick from PO item detail (invoice Tab) should get unticked automatically.
Is there a User Exit for ERS at PO level
Thx ,

Hi
Please verify that the user running the report as well as the RFC User in the SRM system must have proper authorization to execute the report. For time being, provide SAP_ALL profile, and then try out the same.
Also, check whether for the R/3 back-end Vendor, the ERS is set or not.
Please confirm this -
You want to set the ERS indicator for the documents sent from SRM into R/3 system. Is this your requirement ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

User exit for pricing at billing level

Similar Messages

Maybe you are looking for