User-Exit for Serial Number Profile / Equipment creation
Hi ,
In the Material Master Data , we have a serial number profile and at the time of
Post Good Issue , the system do generate an equipment record in the Service Module .
That is standard SAP and working very well .
For some customers (Inter-Company) customers we do not want any Equipment record in the Service Module to be created .
What standard SAP functionality or user-exit can we use in order to not create the Equipment record in the Service Module ?
Regard's
Transaction SPRO
Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Serial Number Management --> Define Serial Number profile
In the Serial number profile, go to Serializing procedures. The EqReq field determines whether an equipment is to be created or not. For e.g. 01 in MMSL implies that equipment will not be created during GR,
Not sure whether this will satisfy your requirement. Will need more information for that...
Hope this helps,
Lakshman
Similar Messages
-
User Exit for "Serial Number" in VL02N before "Post Goods Issue".
Hi Friends,
Current Scenario:
End User has to scan "Serial Number" for Main Unit (Item CAtegory - TAN) while doing "Outbound Delivery". But, sometimes he forget to do this activity of scanning "Serial Number". And do "Post Goods Issue" without "Serial Number".
Requirement:
When End user will click "Post Goods Issue", system should first check "Serial Number" for Main Unit (Item Category - TAN). If he will not find "Serial Number" then system should give warning message for "Serial Number".
Please suggest the suitable "User Exit" that can be used for above purpose.
Or if there is any other way then let us know.
Regards
Sivahi
check is there any standard User Exit available for VL02N. apply your logic and activate -
User exit for iw21 to get Equipment 'position'
Hi,
can any one give the user exit for IW21, to get 'Position' of equipment.
i.e. when i enter equipment in IW21 i am to save it's 'position ' automatically.Where do you want to to save the position in the notification?
Also see the link at the top of this forum for PM/CS User-Exits
PeteA -
User Exit for MIGO during inspection lot creation
Hi Everyone,
I want to change the vendor number in the inspection lot while doing goods receipt for an outbound delivery in MIGO. Is there any user exit available to do this or can we do this in standard transaction?
Please guide me how this has to be done.
Regards,
Sugopai am working on 4.6c.
This BADI is not present there.
Any other solutions suggested. -
User Exit for assignment number check
Hi SAP GURUS,
I want to have a cheque in system for not to enter a cheque number twice in assignement field. Which user exit i can use for the cheque payment made thru F-53 OR F-58 OR F110.
Thanks
CHEERS
Edited by: NITIN on Apr 26, 2010 7:50 AM
Edited by: NITIN on Apr 26, 2010 11:18 AMIdentification of user EXIT
1. Enter T.code for which you want to maintain User exit. For ex : ME51 (Purchase requisition)
Path: Status Status Double Clicks on the program NameGo toAttributesNote down development class.
For Ex : ME51u2014development class/package name is ME
2. Enter T.code : SMODutilities FindEnter Development class/package name Execute
3. It shows all the Exit names. Click on Exit Name and click on Functional module name.
for ex: f-53 having following exits.
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Thanks
ANJI -
User Exit for Purchase Requisition Number Range
Dear Experts,
I searched on sdn, i got M06B0003 &M06B0004 this 2 user exit for PR Number range.
I have activated both User exits but while creating PR is not getting effect of that user exit.
I have checked by putting Break-point in respective user exit but while saving the PR it should go to that break-point but it not going there aslo.
And also i have checked user exit MM06E003 but it is for Purchase Order number range.And for PO it is working.
Please help me to solve this issue.Solution will be appreciated.
Regards,
Sanket.Hi,
Sorry that badi will not help try this one ...EXIT_SAPLMEREQ_009 in MEREQ001 where the export parameters is purchase requisition number....
Thanks,
Shailaja Ainala. -
User Exits for Transaction PA30
Hi Friends,
My Requirement:
The changes done to the emplyoee data in PA30, should be reflected in Vendor Master database tables, is there any user exit or any other way to do that.
Please help me
Regards
Kumar MHi,
These are the EXITS and BADIs avilable for the t-code PA30
now see which one full fill your requirment.
Enhancement
PBASRP01 PA: User exit distributed reporting
PBAS0002 PA: Enhancements for Personnel Administration - Menu
PBAS0001 PA: Pers.Admin./Recruitment: Default values and checks
PARA0002 Enhancement for Calculating Annual Salary; IT0008,14,15
HRPBAS01 User exit for personnel number validation
HRPC0001 HR: PC download authorization
HRRPAI01 User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
PARA0001 Enhancement for Determining the Number of Periods
Business Add-in
HR_FAST_ACTION_CHECK Check fields on the fast entry screen
HR_INDVAL HR: Indirect wage type valuation
HR_SET_PKGAB
HR_F4_GET_SUBTYPE HR: Entry help for subtypes
HRPAD00_ADRS HR: Address formatting
HRPAD00INFTY Update / Infotype maintenance
HRPAD00AUTH_CHECK HR: Authorization Check
Regards
Bikas -
User exit for sale order material serial number change
I am looking for User exit for changing the serial number for the saleorder material va01.
Hey,
Check the include program : MV45AFZZ. it will trigger at the of saving the sale order.
IF SY-TCODE EQ 'VA02' OR SY-TCODE EQ 'VA01'.
Endif.
Note : Write your coding inside the IF clause to avoid affecting the other transaction codes.
Regards,
Saravanan M -
What are the User Exits for Sales Order creation process?
Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
MindaugasPlease check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar -
User-exit for delivery while assigning serial numbers(urgent)
hi all,
can u plz tell me the specific user exit for delivery (VL01n) while assigning serial numbers?
i am getting the serial numbers for material in database table OBJK .i am also getting these serial no.s in IQ01.
while doing delivery,i am going for extra-->serial number.at this time one screen for serial number is comming.those serial numbers which are stored in objk will transfer to this screen of delivery automatically.
for this , i want a specific user-exit for delivery so that i can transfer the serial nos from objk to that screen of delivery.plz suggest .(urgent )
any idea is highly appreaciated
Regards
pabitraYou can find from below list of user exists
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound) -
Exit/Badi for Serial number generation in MIGO
Dear ALL,
Requirement: Based on the serial number profile i will maintian the number range in custom table and on doing MIGO system will find the serail number profile thorugh material and based on that system should generate the serial number automatically.
Advise for the user exit /badi ... I have checked some exit starting with IQ.... .
Please provide the exact badi or exit for this purpose.
Regards
RahulYou can see the local class lcl_migo_globals used in include LMIGOGL1 which inturn has a variable
called kernel with reference to class lcl_migo_kernel. Here exists an example [Serial Numbers Modify in LINE_MODIFY method in MB_MIGO_BADI|http://saptechsolutions.blogspot.com/2011/11/serial-numbers-modify-in-linemodify.html]of accessing & modifying the lines by accessing the call stack using class lcl_migo_kernel and method line_get & line_modify through badi MB_MIGO_BADI . -
User Exit for ME21 PO Creation at the time of saving--Urgent
Hi,
Can some one help me out in finding the user exit for PO creation at the time of saving.
The Requirement is:
I need to create a custom field in EKKO table.
After appending the structure with the field to the EKKO table, i need to create a PO.
Now i need to update the field which has been created at the time of pressing the SAVE button.
I need to update the EKKO table it self.
I could find the user exits but none of them have the EKKO table either in Changing or in Tables.
Thanks,Hi,
You may want to check this user exits.
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
Here is the list of available user exits for ME21.
EXIT_SAPMM06E_001 - Other Number Range or Own Document Number
EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen
EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)
EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)
EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header
EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document
EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item
EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)
EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract
<b>Reward points</b>
Regards -
User Exits for Invoice creation ,cancellation and sales return
Hi Gurus,
Pl help me it's very urgent.
I did not find any user exit invoice creation so i wrote the following code in include program
MV60AF0B_BELEG_SICHERN.
This code is to update the Z*table while saving invoice ,cancellation and sales return.
The code modification is like below
FORM BELEG_SICHERN *
Buchen Fakturabelege *
FORM BELEG_SICHERN.
READ TABLE XVBRK INDEX 1.
IF SY-SUBRC NE 0.
CALL FUNCTION 'DEQUEUE_ALL'.
MESSAGE S032.
EXIT.
ENDIF.
IF SAMH_MOD = ON.
EXPORT XKOMFK TO MEMORY ID 'SDBILLDL'.
ENDIF.
DATA: CALC_TYPE.
IF REBATE_DETERMINED = 'Y'.
CALC_TYPE = 'A'.
ELSE.
CALC_TYPE = 'I'.
ENDIF.
*{ INSERT RD1K903017 1
Work Area*********************
data : wa_xvbrk type VBRKVB.
data : wa_xvbrp type vbrpvb.
data : wa_zmigo type zmigo.
data : wa_vbrp type vbrp.
Internal table Creation*******
DATA: BEGIN OF tab_XVBRP OCCURS 100.
INCLUDE STRUCTURE VBRPVB.
DATA: END OF tab_XVBRP.
data : begin of tab_vbeln occurs 10,
vbeln type vbrk-vbeln,
knumv type vbrk-knumv,
end of tab_vbeln.
data : tab_zmigo type table of zmigo.
data : tab_vbrp type table of vbrp.
*****Data declaration*************
data : v_no_of_inv type i.
data : v_vbeln_no(10) type n.
data : v_last_inv_no(10) type n.
data : v_first_inv_no(10) type c.
data : v_tot_qty type i.
data : v_frbnr type mkpf-frbnr.
*******Ranges*********************
ranges : r_vbeln for vbrk-vbeln.
*****Populating IT****************
tab_xvbrp[] = xvbrp[].
describe table xvbrk lines v_no_of_inv.
*} INSERT
CALL FUNCTION 'RV_INVOICE_DOCUMENT_ADD'
EXPORTING
VBSK_I = VBSK
WITH_POSTING = 'A'
PREISFINDUNGSART = CALC_TYPE
IMPORTING
VBSK_E = VBSK
TABLES
XKOMFK = XKOMFK
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBSS = XVBSS
XVBRK = XVBRK
XVBRP = XVBRP
XVBPA = XVBPA
XKOMV = XKOMV.
*{ INSERT RD1K903017 2
data : v_count type i,v_fkimg type i .
data : v_no_of_records(10) type n.
wa_xvbrk = xvbrk.
********Selecting the last rec no from ZMIGO
select max( sr_no ) from zmigo into v_no_of_records.
*****If Distribution channel is not ZB*********
if wa_xvbrk-vtweg ne 'ZB' and ( wa_xvbrk-fkart = 'ZRIN' or wa_xvbrk-fkart = 'ZRTE' ).
if v_no_of_inv = 1. " Process only when there is one invoice
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
endloop.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
clear v_no_of_inv.
else. "When there are Split Invoices
v_last_inv_no = wa_xvbrk-vbeln.
v_vbeln_no = v_last_inv_no - v_no_of_inv + 1.
v_first_inv_no = v_vbeln_no.
sort tab_xvbrp by vbeln.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = v_vbeln_no. "wa_vbrp-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = v_vbeln_no.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
at end of vbeln.
v_vbeln_no = v_vbeln_no + 1.
endat.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
endloop.
endif. "End of first 2nd IF.
clear : v_no_of_inv, v_vbeln_no.
endif.
****************Sales return************************************
if wa_xvbrk-fkart = 'ZRRE' and wa_xvbrk-vtweg ne 'ZB'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '651'.
condense wa_xvbrk-xblnr.
wa_zmigo-reference = wa_xvbrk-xblnr.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg, v_frbnr.
endloop.
endif.
*******Invoice Cancellation*****************************
if wa_xvbrk-fkart = 'ZRS1' and wa_xvbrk-vtweg ne 'ZB'.
delete tab_xvbrp[] where shkzg eq 'X'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
condense wa_xvbrk-zuonr.
wa_zmigo-reference = wa_xvbrk-zuonr.
wa_zmigo-mtype = '602'.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg.
endloop.
endif.
clear : v_no_of_records.
*} INSERT
CALL FUNCTION 'STACK_RESET'.
R185D-DATALOSS = SPACE.
FOLGEAUFRUF102 = SPACE.
PERFORM SETPAR_INIT.
*{ INSERT RD1K903017 3
*} INSERT
LEAVE.
ENDFORM.
This program is working fine for single user but in production where no of people are creating the invoices from different places the data is not getting updated in table ZMIGO.
sometime populating with wrong data , partial data and sometimes no updation at all.
I have used the table locking system enqueue and dequeue FM's before n after updation but still the same
thing is happening.
What could be the reason.
Looking for help very urgent any other alternate option.Hi,
Go thru these..
Enhancement
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line (transfer to accounting)
SDVFX003 User exit: Cash clearing (transfer to accounting)
SDVFX004 User exit: G/L line (transfer to accounting)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit: Tax line (transfer to accounting)
SDVFX005 User exit: Reserves (transfer to accounting)
Business Add-in
SD_CIN_LV60AU02 BADI for billing
If it is helpful rewards points
Regards
Pratap.M -
Need to find user exit for Auto TO creation
Dear SAP WM experts
I need to filter the TR getting converted into TO automatically
I can see, in configuration, that an exit is suggested for the same:
This configuration refers to OMKZ transaction, package LVSC
When I search using the same in SMOD, I do not get any entries
Any help would be appreciated!
Thanks
Yogesh.Hi Yogesh!
For "Automatic TO creation (background processing)", the following user exits are available:
MWMTOAU1 Selection of requirements for automatic creation of orders.
MWMTOAU2 Reference number assignment.
MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
See Develop User Exits for Warehouse Management - Warehouse Management - SAP Library
My guess is, that the MWMTOAU1 user exit is the one you are looking for.
The SAP documentation says:
"With this user exit, you can select transfer requirements for the
automatic TO creation according to your own criteria by means of report
RLAUTA10."
Best Regards!
Tim Lutz -
Number Ranges for the Serial Number Profiles
Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.
Maybe you are looking for
-
ITunes error - will not work after trying to update to 7.2, then to 7.3
I have tried to update to both 7.2 and to 7.3, but both updates have failed. Now I am stuck on 7.1 with an error, where my iTunes will not operate and I cannot uninstall because it comes up with the same error that I get when I try to install or unin
-
Headset not supported??
So yesterday I wanted to listen to music with my headphones but there were strange noises when I plugged it in, and my phone showed "headset not supported", and then I used the Sony earphones that came with the phone and it still didn't work. I tried
-
APERTURE DISABLED BY MOBILE ME
An upgrade to MobileMe has disabled my Aperture Application. It will not open and only wants to make a new MobileMe album. Have tried reinstalling, updates to 2.0 , removed and re-set Aperture System ID,Viewers are all muted etc. Anyone with an idea?
-
I cannot install creative cloud I get error code 48
I had tried updating LR to LR6 and I received and error code 48. I tried everything I saw except for the adobe cleaner. Including(you guess it) uninstalling CC. Now what?
-
Burning cds with information on them
I burn cds real easy from my iTunes application. I have a cd player in my car that can read the artist, title and album. The problem is every time I burn a cd and put it in my car it only says track one, two, three ect. Is there any way I can change