User exit for transaction CJ20
Hi all
Please suggest me the User exit for transcation CJ20
Thanks in advance
Regards
Neha Kapoor
Hi Please check the following link,
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
COpy and Paste the program in se38 and then run it u will get all the userexit of any transaction u want.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Please reward for the same.
Similar Messages
-
User Exit For Transaction F150 (Dunning)
Hi All,
Can any one help me in finding a User Exit for Transaction <b>F150</b> (Dunning).Hello,
Try this one
F150D001
Bye
gabriel -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
User exits for transaction VL10B
Hi,
Could anyone please give me the user exit for transaction VL10B.
Regards
KaranHi Karan,
Just check -
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
REWARD!!
Regards,
Ajinkya -
User Exit for Transaction V/76
Hello Gurus,
I'm looking for user exit for transaction V/76, Basically I just need to add an additional checking for the value entered in the product hierarchy using a check table (custom table) functionality. However I can't see any user exit that can be used since this is a view maintenance table/transaction. Can anyone of you experts can confirm that there is user exit for this transaction? If YES, I will continue my searching if there is NO then thanks for the confirmation. Thank you very much in advance!
Best regards -Hi Rous,
Please paste this code and check:
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Hope this helps you, reply for queries.
Regards,
Kumar. -
User exit for transaction CK11N
Dear all,
can any body please tell me any user exit for transaction ck11n.
i want to terigger the exit when the save button will be pressed in the ck11n transaction.
i have found one exit "EXIT_SAPLCK21_002" but it is not triggering after save button is pressed.
so please tell me if any other user exit is there to suit my requirement.
thanks
prabhuduttahi,
found the following BADI
check them
COSTINGRUN_CK Edit Costing Run
COST_APPORTION_CK Maint Apportionment Structure Joint Production: Dist Rules
CO_PROD_COSTING_CK Cost Management for Joint Products (Costing, Target Costs)
DATA_EXTENSION_CK For Data Enrichment in Product Costing
DYNPRO_EXTENSION_CK BAdI for Interface Enhancement in Costing
ORDER_COSTING_CK Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK Enables Quantity/Structure Changes in Costing
SUR_STOCK_TRANSF_CK Overhead on Materials with Stock Transfer Between Plants
CK_KALAMATCON2_CI BAdI for CI Fields for Table KALAMATCON2
VALUATION_CK BAdI for Valuation in Product Costing
Regards -
User-exit for transaction co13: PP Order Cancel Confirmation
Hello!
Whether prompt, please,
exist what that user-exit for transaction co13: PP Order Cancel Confirmation?
Thanks,
Anton.Hi Antonio,
Please check this all user exits (SMOD) available for CO13.
CONFPP01 - PP order conf.: Determine customer specific default values
CONFPP02 - PP order conf.: Customer specific input checks 1
CONFPP03 - PP order conf.: Cust. specific check after op. selection
CONFPP04 - PP order conf.: Customer specific input checks 2
CONFPP05 - PP order conf.: Customer specific enhancements when saving
CONFPP06 - PP Order Confirmations: Actual Data Transfer
CONFPP07 - Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 - PS confirmation: Determine customer specific default values
CONFPS02 - PS confirmation: Customer specific input checks 1
CONFPS03 - PS confirmation: Customer specific check after op. selection
CONFPS04 - PS confirmation: Customer specific input checks 2
CONFPS05 - PS confirmation: Customer specific enhancements when saving
CONF0001 - Enhancements in order confirmation
CONFPI01 - Process order conf.: Calculate cust.specific default values
CONFPI02 - Process order confirmation: Customer spec. input checks 1
CONFPI03 - Process order conf.: Cust. spec. check after op. selection
CONFPI04 - Process order conf.: Customer specific input checks 2
CONFPI05 - Process order conf.: Cust. spec. enhancements when saving
CONFPI06 - Process order confirmation: Actual data transfer
CONFPM01 - PM/SM order conf.: Determine cust. specific default values
CONFPM02 - PM/SM order confirmation: Customer specific input checks 1
CONFPM03 - PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 - PM/SM order conf.: Customer specific input check 2
CONFPM05 - PM/SM order conf.: Cust. specific enhancements when saving
Regards,
Ferry Lianto -
Process to find user exit for transactions /sapapo/snptlb or /sapapo/sdp94
Hi All,
Can you help me out with the approach to find out user exits for transactions /sapapo/snptlb or /sapapo/sdp94?
What I am looking for is the approach, i mean how to proceed with?
Win full points for detailed answer !!
Thanks a lot - ChandanHi Chandan - this is the same as in any module of SAP:
1) check SPRO
If nothing is found then do the following:
1) Goto SE24 and display class cl_exithandler
2) Enter method GET_INSTANCE and create a break point at Line 25 (CASE sy-subrc)
3) Execute SAP standard transaction and invoke the process for which you need to create custom coding
4) Your break point will stop the process in debug mode - check the values of variable 'exit_name', it will contian the name of the BADI currently being executed.
5) Continue to debug by pressing F8 to see other BADI's
6) Repeat steps 3 thru 5 for each process that you want to find a BADI for
Regards
Andy -
User exit for transaction FCHR
hello,
is there any user exit for transaction FCHR( online cashed checks)??
thanx in adavance..
regards,
Maya.Maya,
Execute the below prog to know all the user extis available for a paritcular transaction.
"Sab Maya Hi"
Say thanks to SDN.
K.Kiran.
*& Report Zkk9.
REPORT ZKK9.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE initial screen
Hi All,
I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.
please provide your suggestions.Hi,
here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
DATA: faelligkeit TYPE d,
faelligkeit_text type c length 10,
meldungstext TYPE c LENGTH 100.
FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
IF sy-uname = 'XYZ'.
* BREAK-POINT.
READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
ASSIGNING <it_source>.
faelligkeit = <it_source>-dfaell.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
DATE_INTERNAL = faelligkeit
IMPORTING
DATE_EXTERNAL = faelligkeit_text
EXCEPTIONS
DATE_INTERNAL_IS_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF faelligkeit <> sy-datum.
CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
CALL METHOD pi_proxy_messages->set_message
EXPORTING
pi_message_id = 'T0'
pi_message_number = '101'
pi_message_severity = 'E'
pi_message_var1 = meldungstext
EXCEPTIONS
OTHERS = 4.
ENDIF.
ENDIF.
It is not a really nice coding but it shows in a simple way how to use the BAdI.
Regards
Robert -
BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE
Hi All,
I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.Hi,
here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
DATA: faelligkeit TYPE d,
faelligkeit_text type c length 10,
meldungstext TYPE c LENGTH 100.
FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
IF sy-uname = 'XYZ'.
* BREAK-POINT.
READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
ASSIGNING <it_source>.
faelligkeit = <it_source>-dfaell.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
DATE_INTERNAL = faelligkeit
IMPORTING
DATE_EXTERNAL = faelligkeit_text
EXCEPTIONS
DATE_INTERNAL_IS_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF faelligkeit <> sy-datum.
CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
CALL METHOD pi_proxy_messages->set_message
EXPORTING
pi_message_id = 'T0'
pi_message_number = '101'
pi_message_severity = 'E'
pi_message_var1 = meldungstext
EXCEPTIONS
OTHERS = 4.
ENDIF.
ENDIF.
It is not a really nice coding but it shows in a simple way how to use the BAdI.
Regards
Robert -
User exits for transaction va11,va21,va01
i was looking for <b>user exits</b> after the transactions <b>va11</b>,<b>va21</b> and <b>va01</b>(in the order to cash cycle)transactions <b>commit</b>. once the transaction commits i wanted to take some data and send it to another system after the transaction commits by calling an RFC at the user exit.
if anyone know such an user exit please let me knowthe following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod -
USer exit for transaction Code APPCHANGE
I want to include a function module to trigger a workflow
in a user exit related to program
SAPLHRHAP_UI_DOCUMENT_REPORT (transaction Code APPCHANGE.)
The workflow will be triggered when SAVE button is pressed.
Thank your for your helpHere is a program that can be used to find user exits per transaction code.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
* FORM get_data *
form get_data.
select single * from tstc
where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = tadir-devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
endform.
* FORM write_list *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
endform.
Regards,
Rich Heilman -
User Exit for Transaction QM01 & VA01
Hi experts,
I have a requirement such that the newly created QM Notification number(QMNUM) from QM01 will be exported to a memory ID and imported in transaction VA01 such that the Sales order(VBELN) will have the same value of Notification number(QMNUM). QMNUM = VBELN.
QM notification number and the Sales Order number to be created for each claim filed by a customer should be the same. This is being done in QM01. The problem is that when this is done in BDC, we cannot simply "copy" the notification number in QM01 into the sales order number of the linked Sales order that is being created.
Need a User Exit for this. Thanks.Hi Marc,
<b>User-exit for QM01</b>
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
<b>User-exit for VA01</b>
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
<b>plz reward points if helpful or if it solves ur query.</b>
Thanks
Chinmay -
User exit for transaction VA01 for screen validations
Hi All,
I would like to know a user exit where I can validate the entry for "sold to party" on second screen of VA01 transaction against the sales area entered in the first screen.
Also please let me know how to code in "MV45AIZZ" to capture the same if it can be done.
Regards,
Usha.Hi Usha,
Following are the User Exits for VA01.
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
<b>V45A0002 Predefine sold-to party in sales document </b>
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
<b>Have a look at V45A0002.</b>
<b>Reward points if it helps.</b>
Maybe you are looking for
-
How do I make one corner rounded?
Hey, Firstly, I'm using Illustrator CS6. I'd like to round a specific corner of a shape (a rectangle to be specific). I've seen in other posts that the CornerEffects.jsx script should work. But every time I select my rectangle, go to File > Scripts >
-
Please Help, my 5G new Ipod reboots itself constant!
My brand new Ipod 5G 60 gb reboots itself constant. When i am watching a movie or listening to music it sudenly stops and the apple logo comes on, what means it reboots. All my preferences are then deleted, sometimes it even get stuck and i have to r
-
Letters disappear after embedding fonts in acrobat.
Hello, I am working on my thesis and I have to have all of my fonts embedded. I used Latex to create a pdf/ps and now I am trying to figure out how to get the fonts embedded. From what I have read, acrobat and distiller can do this. When I run the ps
-
Migrating NIS users to Open Directory
Was wondering if anyone has any experience with migrating NIS users over to Open Directory? I have setup an Open Directory server (10.6) and am looking to move about 150 users from my NIS server to it. I can move the users/GIDs easy enough but want t
-
Dear all, We have 5 plants and 17 depots. We run standard cost estimate for 5 plants. In the same way, how to arrive at the costs for depots? It should contain excise duty, freight etc., Please suggest. Thanks & Regards, A.Anandarajan.