User exit for VD01 - Create Customer

I am finding user exit for VD01 - Create Customer.
I need a newly created Customer number - KNA1-KUNNR.
I found user exit EXIT_SAPMF02D_001, but if field Customer left blank on screen in VD01, the parameter I_KNA1-KUNNR is blank. Because program genereates KUNNR further.
Edited by: S S on Dec 23, 2008 7:56 AM

Dear SS,
What I understood is system is generating internal number range for customer in your case.
You want to know the number of customer number.
I think with this exit EXIT_SAPMF02D_001 you don't get customer number.
Try with this BADI CUSTOMER_ADD_DATA
Method MODIFY_ACCOUNT_NUMBER. use break point here.
Then create a customer in VD01 (internal number range). maintain necessary information and save.
system will take you to debugging mode. here you can see internal number of customer.
Regards,
Chandra

Similar Messages

Regarding User Exit for VD01

Hi All,
I need to do some special validations based on the partner funstion which is entered during the customer creation through the transaction VD01.
May i know which user exit can be used for the above or any badi can be used
Thanks.

Hi,
User sxit for VD01 SAPMF02D User exits: Customer master data
Regards,
Prashant

User Exit for IW51-Create Notifcation

Hi Friends
I want to capture User or System Status when Notifcation - IW51 is saved. Kindly help me finding the exact user exit for this requirement,
Thanks
Senthiil

Hello,
Below are the list of Exits and BADI,
Enhancement/ Business Add-in            Description
Enhancement
IWO10026                                User check on setting status 'Do not perform'
IWO10027                                User exit: Generate user-defined settlement rule
IWOC0001                                Create PM/SM notification: Determine reference object
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
Business Add-in
IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample
Regards,
Sujeet

User Exit For PR Create and Change

Hi,
Please help me for finding User Exit while creating Purchase Requisiton(Me51/Me51n) and aslo changing Purchase Requisiton(Me52/Me52n).
Mainly i want to exit for validating Plant and material code while creating and changing PR.
Thanks,
Sunil sahoo

Hi,
Use the exists
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
Regards,
Nandha

Enhancement / user exit for one time customer

Hi,
We need to upload address of one time customer when creating external billing documents.We are NOT creating billing document through sales orders . So I cannot do it manually. I have populated the Post Code and the city in the RV60AFZB but it doesnot flow to ACCFI structure, anybody has worked on this or has encountered and solved this problem before ??
Regards,
Narayani

Hi,
There are user exits to pass data to FI structures as well,
EXIT_SAPLV60B_001: Change the header data in the structure acchd
EXIT_SAPLV60B_002: Change the customer line ACCIT
EXIT_SAPLV60B_006: Change the control line ACCIT
EXIT_SAPLV60B_004: Change a GL account item ACCIT
This might help you. If not please explain in detail about your requirement.
Regards,
Shashwath

User exit for before creating PO

Hello Experts,
I have one a requirement
when the customer creating the PO, before save free charge(UMSON) filed is automatically active(check the check box) for particular vendor,
I done the implicit enhancement for the Tcode ME21its working fine but the customer use ME21N or MD04 also,
I try to do the implicit enhancement for these Tcodes also but it showing
finally I got a Badi ME_PROCESS_PO_CUST----->Zbadi----->PROCESS_ITEM
but its not working..
anybody give me the solution for this..
tnx in adv..

Go to transaction SE24
Provide the class name CL_EXITHANDLER
Place a break point at sy-subrc
CALL METHOD cl_exithandler=>get_class_name_by_interface EXPORTING instance = instance IMPORTING class_name = class_name CHANGING exit_name = exit_name EXCEPTIONS no_reference = 1 no_interface_reference = 2 no_exit_interface = 3 data_incons_in_exit_managem = 4 class_not_implement_interface = 5 OTHERS = 6. CASE sy-subrc.
The exit name will give you all the BAdis. Check which suits your requirement and also for which implementation can be done since it shows all SAP internal BAdi's as well

User-exits for PO and MIGO

Hello Experts
i am having a requirement where in i will have to perform certain validations before posting PO and material document (MIGO). If these validations fail, PO or Material document should not be posted.
i managed to find certain BADI and user-exits (MB_CF001 and MB_DOCUMENT_BADI) typically for MIGO but when tested they use to get triggered once these doucment numbers are generated.
what i am looking at is cancel the process by giving the hard-error.
thanks in advance.
regards
rajeev

Hi,
User exits for MIGO:
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
User eits for PO:
These are the User exit for CO01 ( Create PO)
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting
I am giving you the list of all user exits available for ME21N:
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
For your purpose you can probably try MM06E005. Or you can also try BADI ME_PROCESS_PO_CUST.
You can also check this BADI available for PO:
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Do
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Orde
SMOD_MRFLB001 Control Items for Contract Release Order
Transaction codes for BADI are:
SE18 - Business Add-ins(BADIs): Definition transaction
SE19 - Business Add-ins(BADIs): Implementation transaction
SE24 - Class Builder
Link for all user exits in SAP:
http://www.easymarketplace.de/userexit.php
Pls reward helpful points.
Regards,
Ameet

User Exit for CO07

Hi All,
I have come across one requirement:
While creating rework order in CO07, in the Component overview screen, there are two types of line items:
1. Component to be issued (261 movement)--- Qnty value is positive (like 150 meters)
2. Component to be received (531 movement)--- Qnty value is negative (like -75 meters)
There are so many line items in this screen. (some with positive values and some with negative)
I want the system to check,
sum of all positive values = sum of all negative values
If there is difference, then the system should give an Error message and not allow:
1. either the release of order
2. or Saving of order
I think, User Exit can be given for this effect.
Please let me know, the exit for the above problem.
Dinesh

CHECK THE USER-EXITS FOR CO07:
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operat
COZF0002            Change purchase req. for externally procured compone
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indica
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process ord
PPCO0010            Enhancement in make-to-order production - Unit of me
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch deter
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document l
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines
WITH LUCK,
PRITAM.

Regarding creation event in user exit for create customer

hi gurus,
in user exit how to create event for create customer
regards
vijay

Hi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
mark if helpful
Regs,
Tushar Mundlik

HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT

Hy,
HOW TO CREATE A USER-EXIT FOR MB31
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.

Hi Rawat,
 You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

User exit for ME21N (Not functional or customer exit)

Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PM

Hi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it.

User exit for incoming PO - (PO is created by CIFing TLB order to R/3)

Hi All,
    I need to find out the APO INBOUND user exit for reciving the PO information from the connected R/3 system. Initially a TLB order is created in APO and CIFed to APO and after the PO is created in connected R/3 system this PO number and related information is CIFed back to APO and this TLB order is replaced by the R/3 PO number.
Please help me outto gain full points.
Thanks in Advance,
Chandan Dubey

Hi,
I am not clear with ur query and therefore check out the list of Inbound and outbound Idoc user-exits:
IDoc Inbound User Exits
1.    ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2.    ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3.    ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4.    ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5.    ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6.    ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7.    ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8.    ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9.    ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10.    ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11.    ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12.    BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13.    BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14.    BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15.    COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16.    CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17.    DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18.    DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19.    DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20.    DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21.    DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22.    EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23.    FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24.    FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25.    FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26.    FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27.    FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28.    GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29.    HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30.    INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31.    INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32.    LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33.    MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34.    MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35.    ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36.    ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37.    ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38.    ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39.    PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40.    PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41.    PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42.    REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43.    REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44.    SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45.    SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46.    SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47.    SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48.    SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49.    SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50.    SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51.    SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52.    SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53.    SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54.    SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55.    TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56.    WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57.    WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58.    WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59.    WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60.    WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61.    WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62.    WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63.    WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64.    WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65.    WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66.    WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67.    WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68.    WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69.    WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70.    WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71.    WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72.    ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73.    ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74.    ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75.    ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76.    BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77.    BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78.    COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79.    CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80.    DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81.    DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82.    DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83.    DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84.    DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85.    FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86.    FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87.    FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88.    FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89.    FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90.    GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91.    HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92.    INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93.    INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94.    KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95.    LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96.    MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97.    ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98.    ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99.    ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100.    PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101.    PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102.    PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103.    PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104.    PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105.    PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106.    REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107.    REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108.    SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109.    SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110.    SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111.    TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112.    WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113.    WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114.    WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115.    WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116.    WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117.    WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118.    WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119.    WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120.    WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121.    WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122.    WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123.    WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124.    WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125.    WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126.    WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127.    WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128.    WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
Link for the same:
http://erpgenie.com/abaptips/content/view/302/62/
Pls reward helpful points.
Regards,
Ameet

User exit for XD01 (Customer Creation)

Hi All Gurus,
I need to extract some data (kunnr, name1, name2, telephone, mobile etc from KNA1, KNVV, KNBK tables) when user is creating a new customer. I have used the user exit SAPMF02D - EXIT_SAPMF02D_001 for the requirement.
I am getting all the required data except KUNNR. It is always blank, and according to my guessing it is because yet the KUNNR is not created.
Is there any other alternative or user exit for this scenario?
Thank you all in advance,

This was a very useful post Marcin!
For those who need detailed steps for BTE regarding customer master data:
Transaction FIBF
Environment -> Infosystem P/S
Find event code using google (debitors are 00001320)
Click "Sample Function Module" and copy it to your FM (e.g. Z_CUSTOMER_UPDATED)
Back in FIBF choose menu Settings -> Products -> ...of a customer and create one (check "Active"). Go back to FIBF
Settings -> P/S Modules -> of a customer and assign your event + product + FM
Now you can implement your FM
You can use this FM to track changes to customer master data and e.g. feed the information into interfacing systems.

BADI/User Exit for custom table update from Delivery

Hi
Our requirement is to update a custom table with the delivery number and other related details when the picking status is changed to "C". Kindly suggest BADI/User exit for this requirement .
Thanks in Advance for your immediate help .

Hi Joseph,
See SAP Note 415716 - User exits in delivery processing. It says when you have the document number available, what is permitted, what not, ....
I hope this helps you
Regards
Eduardo

How to create user Exits for selecting ranges of the month

Hi Bw Experts,
Right now i need to create a user exits for my report which is coming from Infocube which has 12 months and 12 qtys. But if my client want to see the content of the report for e.g 1 to 3 months in selection screen means then we need to create a variable and user exit to accomplish this problem or is there any solution by which we can solve the problem. Try to suggest me and steps to achieve.
Thanks in advance,

Hi,
Thanks for your input. But the questions is 12 amounts and 12 qtys not 12 months sorry for the typoerror. We are not carrying month field. But the User want to see the for e.g 1 to 3 months data means then how it is possible to accomplish this issue. Try to suggest me.
Thanks in advance
Message was edited by:
mano_biw durai

User exit for VD01 - Create Customer

Similar Messages

Maybe you are looking for