User exit fr IW22 !
Hello All ,
I'm in need of a user exit or BADI which would help me validate
the items in Activities Performed/inspections tab of IW22. I have tried the following exits
IWOC0004
IWOC0003
IWOC0002
IWOC0001
IWO10027
IWO10026 , but they contain data only about the notification's header and there is no exporting parameter which would help me validate the items entered in the activities tab when SAVE buton is pressed in IW22.
Any suggestion or solution is welcome.
Regards,
Venkatesh.
I think there may be some function modules which can be used in User-Exit of IW22 (Save operation), like CAUFV, similar to Function modules used in IW32 etc.
Please search Function Modules which reads the activity details (old / New) by CO* or CAUFV and let me know if useful.
Regards,
Manjunatha
Message was edited by:
Manjunatha Chary
Similar Messages
-
Dear all,
I want to use a user exit in IW22 screen to add notification time.
pls help me.
ThankxNo Screen Exit for IW22 i think it has only Function Exits
Custom Exits
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
BADIs
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
Edited by: Bala Krishna on Aug 20, 2008 4:00 PM -
User Exit for IW22 for adding a TAB
Plz tell me the user exits if any,there ao add an additional TAB in IW22.
Vipinhi,
check this exits
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
screen exit
IW22 SAPLIQS0 IWOC0002 E EXIT_SAPLIQS0_001
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM1
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM2
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM3
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM4
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM1
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM2
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM3
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM4
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM6
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM7
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM8
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM9
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0008 S SAPLIQS03030_USER0002_SAP 0
QQMA0008 S SAPLIQS03030_USER0002_SAP 0
QQMA0008 S SAPLIQS03030_USER0002_SAP 1
QQMA0008 S SAPLIQS03030_USER0002_SAP 2
QQMA0008 S SAPLIQS03030_USER0002_SAP 3
QQMA0008 S SAPLIQS03030_USER0002_SAP 4
QQMA0008 S SAPLIQS03030_USER0002_SAP 5
QQMA0008 S SAPLIQS03030_USER0002_SAP 0
QQMA0008 S SAPLIQS03030_USER0002_SAP 1
QQMA0008 S SAPLIQS03030_USER0002_SAP 2
QQMA0008 S SAPLIQS03030_USER0002_SAP 3
regards,
sandeep
Edited by: Sandeep patel on Jul 11, 2008 3:27 PM -
Hi,
I have to check the authorization based on the user profile ESTAT and status profile STASM.
I have already written the code in exit SAVE notification.
It has to check the authorization before going inside the tr code.
Here, once the user goes inside the tr code he can change the user profile for which he is not having authorization and then he can save.
If anyone knows, please help me.
Thanks
Shivahi,
chose the bestr from the folowing
Transaction Code - IW22 Change PM Notification
Exit Name Description
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
regards, -
How to find the specifed user-exit
Hi, experts. i am first time to do enchancement. can anyone tell me how to find specifed user-exit. for example, how to find MV45AFZZ? Also, what i should pay attention to when doing enhancment works? thanks.
Hi Jrockman,
There are many things associated to user exit.
a) Tcode- CMOD. here you can find
b) USER-EXIT triggering points ->
Go to se93 and give the tcode to find the main program associated to it.
Go to se38 and give the main program.
Find the package associated to it.Go to->Object Directory Entry.
Go to smod transaction.
Press f4.
Press Information System Button.
Give the Project(Dev Class).
Press enter.
Find the enhancements associated
c) Check the code posted by me ,to get the list of User exits and Badi for a particular tcode in the link mentioned below.
Re: User Exit for IW22 - to populate custom fields
d) few useful links to understand User exits.
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sappoint.com/abap/userexit.pdf
ABAP Enhancements and Modifications - General
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/2342e1f3-0b01-0010-a186-fdd404884050
Menu Exit
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
Screen Exit
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Hope it helps.
Manish -
Need user-exit ....
Hi Gurus,
In vendor line item display(FBL1N) ,when i'm changing Reference no. by going through the Display doc. header button...and save it ,,,it will update in BKPF table......
But for some purpose of mine i need to update in RBKP table
(Invoice header)...So pls. anybody tell me what is user-exit for this purpose.....
Good point will be rewarded...........................Hi Samalendu,
Check the code posted by me ,to get the list of User exits and Badi for a particular tcode in the link mentioned below.
Re: User Exit for IW22 - to populate custom fields
Hope it helps.
Manish -
User exit :exit_sapliqs0_001
hello
can anybody help me out with this query pls????????
Trigger the User Exit : EXIT_SAPLIQS0_001 on clicking the notification closure button in Program SAPLIQS0.
On Notification closure, a Pop up window of text Enter End Malfunction Date and End Malfunction Time with two pushbuttons Continue and Cancel will appear for the conditions given below :
If user clicks the Continue button, it will force the user to enter End Malfunction Date (I_VIQMEL-AUSBS) and End Malfunction Time(I_VIQMEL-AUZTB).
If user clicks the Cancel button, it will delete the notification task and add new task with one not indicating unavailability and uncheck the Breakdown Indicator (I_VIQMEL-MSAUS).
regards
anikUser exits for IW21.
Exit Name
Description
IWO10026
User check on setting status 'Do not perform'
IWO10027
User exit: Generate user-defined settlement rule
IWOC0001
Create PM/SM notification: Determine reference object
IWOC0002
PM/SM notification: Check whether status change is allowed
IWOC0003
PM/SM authorization check of ref. object and planner group
IWOC0004
Change single-level list editing PM/QM/SM ALV settings
USER EXITS FOR IW22.
Exit Name
Description
IWO10026
User check on setting status 'Do not perform'
IWO10027
User exit: Generate user-defined settlement rule
IWOC0001
Create PM/SM notification: Determine reference object
IWOC0002
PM/SM notification: Check whether status change is allowed
IWOC0003
PM/SM authorization check of ref. object and planner group
IWOC0004
Change single-level list editing PM/QM/SM ALV settings
K.Kiran. -
User exit/BADI for tracing change of User Status in IW22
Hello,
I am looking for a user exit or BADI that triggers whenever ther's a change made to User status field.
eg. changing user status to APTC(Approved to be executed)
I then need the exit/badi to trigger my workflow to send mails to list of reviewers. I can handle that but I am not able to find the suitable exit.
I have seen BADI IQS0_STATUS_MAINTAIN, but no use.
Can anyone help?Hi..
Transaction Code - IW22 Change PM Notification
Enhancement/ Business Add-in Description
Enhancement
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Business Add-in
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IQS_MASS_CHANGE BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
No.of Exits: 6
No.of BADis: 7
Arunima -
Dear all,
Which user exit will trigger when we r working in IW22 tcode and putting notificaiton no and going to the next screen that time
Causes named one table control is there know , at which user exit that table control will trigger exactly when we are making the entries in that table control?
Thanks,
Sankar MHi,
Try the below user exits.
EXIT_SAPMIWO0_020
QQMA0014
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Triggered on SAVE:
BADI Definition: NOTIF_EVENT_SAVE
Method Name: CHANGE_DATA_AT_SAVE
Goto Function Group XQQM.All the customer exits including BADI for notifications have been included in that FG.
Goto SPRO ->Plant Maintenance and Customer Service->System Enhancements and Date Transfer..you can find the exits along with documentation. Hope this helps you.
Thanks,
Harini -
BADI/USER EXIT for IW21 & IW22
Hi all,
Pls post me the correct BADI and USER EXIT for Tcode IW21 & IW22.
FYI
My req'ment is to do an enhancement to check the user level for releasing/issue permitting orders.User level should be assigned to the respective person to release the FLAG and not by all.
Pls comment.
thanks & regards
sankarHi,
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Regards,
Pankaj -
Hi,
I have the requirement to send an auto email to Partners maintained in notification created using tranasaction IW21 and IW22.
Now I got the enhncement for IW22, but for IW21 i.e when creation of Notification I want to know if the partner is maintained by user. But since no database gets updated unless and until saving the notification, I cant be able to determine the partner maintained or not.
Does anybody know if any enhancement available for IW21, to know if partners are maintained before saving notification?
Thanks in advance.Hi,
Thanks for the solution provided for creation of notification.
But now I have query on change of notification. I have the same requirement on change of notification as well. I found user exit on saving of notificaiton but that user exit provides old data not the updated one.
So can anybody know the enhancement on PM notification which provides updated data?
Thanks and Regards
Nishad -
User Exits for IW21 - Notification Type
Hi ,
I need to access User Exit related to IW21 , IW22 Transactions.
I require the user exit to customize process for a specific Notification type 'KS'.
User exit when a notificatrion Type is created & when it is modified.User Exits and Badi's For IW21 & IW22
BADI's
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
USER EXITS
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings -
Hi,
I've to modify values for Reference date and Reference time with
SY-DATLO and SY-TIMLO at IW22 transaction. I found some exits to do this, but it didnt work because before finish the process, the program call function CLOSE_ILOA that changes both values again.
Do you know what can I do?
Regards,
Leo.Hello,
These are the exit available for IW22.
Transaction Code - IW22 Change PM Notification
Exit Name Description
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
No of Exits: 6
Alternativelyyou could use this report to find the exit for a Tcode:
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Hope this will helps you.
Vasanth -
Hi experts,
I have question regarding user exit for IW28 tcode:-
1) When you goto IW28 and double click on any "Notification" which does not have "Functional location".
2) Then on "Notification" TAB if you put "Functional location" in "Functional loc." field then it automatically changes Cost Center, WBS Element and SettlementOrder fields in "Location" TAB, and these fields will be changed correspondence to the "Functional Location" entered in "Notification" TAB.
But we don't want that. In "Location" TAB we don't want these three fields Cost Center, WBS Element and SettlementOrder to get updated whenever we enter "Functional Location" in "Notification" TAB.
We want "Location" TAB fields should have what ever it had initially and not changed whenever we enter Functional Location in "Notification" TAB.
I am looking for some user-exit to stop this. Please help me for 1) which user exit i should use and 2) how to proceed.
Thank You Very Much!!
.malahi mala,
in iw21/iw22 or iw28 when ever you you change the tech object f.loc or eqpt that data in the location tab and some more data like catalogue profile are taken from the f.loc /eqpt master records and when ever you change the tech object this data again pulled fom the respective master record but if you dont want thse fields to be updated then do not maintain in ie02/il02 ... but i suggest you to maintain this data as it would be easy in processing ..
regards
pushpa -
Hi all,
I need to find user exit which is launched on saving the notification with the transaction IW21/IW22. I found those items:
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
but any of them seems to be useful for me. Could anyone give me some hint?
Thanks in advance and best regards,
AnnaAnna,
What are you trying to do in the user exit? Here's a list of some of the user exit function modules. You can easily retrieve the project from any of them.
But - the list may not help you. It depends on what you are trying to accoplish. Notifications has some excellent user exits and there are follow up actions / action boxes that can be used as well.
Michelle
Customer Exits QM/PM Notifications
EXIT_SAPLIQS0_002 User Exit for Influencing the F4 Help for Catalogs
EXIT_SAPLIQS0_003 Function Code "+US3/4" in Menu "Goto/Task" in Notification Processing
EXIT_SAPLIQS0_004 Function Code "+US5/6" in Menu "Goto/Activities" in Notif. Processing
EXIT_SAPLIQS0_005 Determining Processing Deadlines According to Priority
EXIT_SAPLIQS0_006 Default Partner When Adding A Notification
EXIT_SAPLIQS0_007 Determination of BOM application for BOM Explosion
EXIT_SAPLIQS0_008 Supply Function Codes with Text/ Deactivate Codes: "Goto/Task"
EXIT_SAPLIQS0_009 Supply Function Codes/ Deactivate Codes: "Goto/Activity"
EXIT_SAPLIQS0_010 Function Codes in Menu "Goto/Notification" in Notification Processing
EXIT_SAPLIQS0_011 Supply Function Codes with Text/ Deactivate Codes: "Goto/Notification"
EXIT_SAPLIQS0_012 Function Codes in "Goto/Cause" Menu in Notification Processing
EXIT_SAPLIQS0_013 Supply Function Codes with Text/ Deactivate Codes: "Goto/Cause"
EXIT_SAPLIQS0_014 Function Codes in Menu "Goto/Item" in Notification Processing
EXIT_SAPLIQS0_015 Supply Function Codes with Text/Deactivate Codes: "Goto/Item"
EXIT_SAPLIQS0_016 Function Module for Deactivating Notification Function Codes
EXIT_SAPLIQS0_018 Check Whether a Change of Notification Type is Allowed
EXIT_SAPLIQS0_019 Influence Data Transfer for New Notification Type
EXIT_SAPLIQS0_020 User Exit "Check Authorization for Status Change"
Customer Exits Notifications
EXIT_SAPLIQS0_001 Customer Exit "Check Status Change for Permission" for PM/CS Notificat
EXIT_SAPLIQS0_017 Default Values when Adding PM/CS Notification
Maybe you are looking for
-
Transpose of table in Data Bloack
Hi All, Please let me know if any one has tried transpose of table where in the first column will list the table headers and rest all columns as data. below is the example which i quote, Column1 Column2 Column3 Column4 Name Employee1 employee
-
Error found in the multithread.....
i not really understand ab multithread if using GUI, so i hope anybody can help me solve this questions...pls so this is the error come out frrom command result .....one error if(e.getSource() == save) String file = data.getText(); saveLog(file); Thr
-
Removing Photos that were manually added to the iPhone
So I had these photos in a folder on my desktop that I decided to manually add to the iPhone. I dragged the group of photos to the iPhone icon in iTunes and it worked. But now I want to delete them and I am not able to. Does anyone know how to take t
-
Which is the top laptops to run Premiere Pro? (Around 2000~3000 USD)
Hello Would you suggest many reliable laptop models to run Premiere Pro please? the price should be around 2000~3000 USD I appreciate your cooperation in advance Message was edited by: Alah Shaban
-
Smart album by date (calendar) not working
Ok, so first off, I've got to say I think I'm all screwed... I'm trying to sort photos in a Project by using smart albums, I thought I would be able to do this by a date/time, but I'm having several issues. 1. I have no idea of the date/time formart,