User Exit ..... how many line free

Dear Experts ...
I have learn that the number of line available to develop specific source code in a BW user exit is limited !
Do you know how many line are available ???

Hi,
I am also not aware of any limitations to source codes in the routines in BW or user exits.
regards
Siggi

Similar Messages

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

How many lines can you have on a nation wide talk and text plan?

How many lines can you have on a nation wide talk and text plan?

A max of five lines is allowed on the Nationwide Talk & Text family plan.

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

MM: Purchase requisition line Items - How many line items can we use

Hi all,
1. Purchase requisition Line items (How many line items can we use?), is there any restrictions.
2. While creating PO with only one tax code for the related PR to input Tax code (without selecting line Items).
Regards,
Sudheer

Hi
There is no limitation for number of items in PR.
Tax code is always applicable for individual item only.It cannot be selected form the whole PO.
Regards
Dev

Need FM/BAPI to get how many line items per given FI document...

Hello Experts,
IS there an available FM or BAPI to get how many line items there is for a given
FI document? We are avoinding BSEG because of the performance.
Hope you can help me guys. Thank you and take care!

Hi,
Not sure if there is a specific FMs or BAPIs whose specific purpose is to just count FI document lines. But you can use a number of FMs to read an FI document.
i.e. FI_DOCUMENT_READ - pass the document keys (BUKRS, BELNR, GJAHR) and retrieve the T_BSEG table to get the document lines. Then you can just use DESCRIBE statement to get the number of lines in T_BSEG.
Also, based on experience, I never had any problems with BSEG as long as I am providing the complete keys for an FI document (BUKRS, BELNR, GJAHR). But if you are trying to avoid BSEG, you can use the secondary index tables like BSIS , BSAS, BSAD, BSID, BSIK, BSAK to improve performance.
Regards,
Oscean Tortona

TO FIND THAT ONE USER HAS HOW MANY TRANSACTION AUTORIZATION

Guru's
I hav to develop a report which states that one user has how many Transaction authorization.
Could u suggest wht steps to be followed.
Or if sum starndard report is available or not.
Eg.
Amam
has MM01,MM02,XK01,XK02.
I need to display as output
amman MM01 MM02 XK01 XK02
& ALSO TELL DURING THIS YEAR HAS HE USED ALL TRANSACTION OR NOT.
Thanks in advance.
Vibhuti

Hey vibhuti,
Go to TCode - SU01.
U'll find all the details.
Reward pts if useful!

How many line item dimensions can a fact table have?

Hi,
How many line item dimensions can a fact table have? Is it tht Max of 16 dimensions(13+3) .Does the 16 dimensions include line items dimensions as well .
Pls reply.
Thanks
Praveen

It includes all dimensios, including line item dimensions.
If you have line item dimension, pl note you cant assign any other characteristic to that dimension.
Ravi Thothadri

I need to know how many lines a cursor returns

Hi,
I need to know how many lines a cursor will return without counting it within a loop or putting a count clause within the cursor . Is there a way to do ?

Please post this question in the database forum for an appropriate response: General Database Discussions
Regards,
OTN

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How many line items can be entered in sales order(maximum)

hi,
how many line items can be entered in sales order(maximum)
SRK

Hi SRK,
The maximum number of line items in a SO or Invoice is 9999.
Please close the thread if answered.
regards
Param

How do I tell how many lines of code my flex project has?

Hi, I recently had two programmers build me a 20k plus application and would like to figure out how many lines of code are in the project and if there is a way I can get a print out of all the code. If it helps the project was architected with the caringorm framework.
thanks.

Thanks for the response, do you mean there is no feature for telling you how many lines of codes or no feature for a complete print out or both?
I'm a little in the dark about exactly how big and complex my project is and would like to have a better understanding of the project before I have programmers bid on phase II of development so I can get a fair quote.

Until how many lines can we write java file

in java file, how many lines can I write?
Manybe It will depend on file system such as window, unix file system.
but, I don't know the exact size.
please let me know how many lines I can wirte in java file of window and unix file system.
thank you in advance.

A class and method implementation in source lines of code (sans comments and white space) should be as large as necessary, but no larger. Good design principals tend to drive towards smaller peices, but there is no one right size size limit.
Personally, I suspect any method that has over 50 lines of code as being too large and probably refactorable. I also suspect any single class (or for that matter .java file) with more than 50 methods or more than 2000 lines of code as being too large and probably refactorable. But sometimes we might really need a 500 line method or an 8000 line, 200 method class. Maybe its a performance thing. Maybe it is just that complicated and too hard to break up. I doubt it occurs frequently, but I won't be shocked when I see it.
Sometimes GUI classes (Swing and AWT) get really huge. Sometimes this is due to code generation, sometimes its just being sloppy. It pays to know the difference.
But the Java langauge sets reasonable (if not overly generous) limits on bytecode and constant pool sizes If the Java compiler begins to complain that something you have built is is too large, face it, it probably is. It's like running into scope nesting or nested name (class in a class in a class...) size limits - usually not a good sign for the structure of your code.
Chuck

User exits : How to build and use through our form application ?!

Hi ,
Im trying to build a user exit based on a C++ program , to be used within our application.
I installed from the Oracle 8 Client CD the Oracle Pro*C/C++ ver 8.0.5 , i have Developer 2000 rel 6.0 patch 7 installed also .
Can anyone please provide me with the steps to build a user exit from A-Z , i read many Documents regarding that but all seems to me complicated , since also im not a C programmer , what i did for the time bieng i searched for file that ends *.pc on my hard disk and i found some of these files , i opend the Pro* C/C++ and it generates for me a *.C file , i reached this stage , then what should i do then to complete the task , for me i went directly to Forms and added a Button that calls the USER_EXIT built-in function , but simply it gave me an error message : User exit doesn't exist .
So Please if you could list for me the steps one by one i would be so graetful to you .
Thanx all in advance for all your efforts .
Islam

Why not make a stored procedure or PL/SQL-procedure? What you have to do is, to build a new version of runform, where you including your user-exits.
But if you insist: Use the help system. They have a description of how to do it on windows. It's more or less the same on unix.

User Exit ..... how many line free

Similar Messages

Maybe you are looking for