User exit in a transaction
Hello!
How could i know what user exits are involved in a transaction?
What i want to do is in transaction MB1A with the movement 551, i want the Cost Center to be determined automaticaly depending in the Reason for movement. But i don't know how to do this.
Regards.
Eduardo
Hi,
These are the user exits for that tcode. Just check it
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
Regards,
JMB
Similar Messages
-
To find out appropriate user exit/ badi for transaction VT01n
Hi,
I have the following requirement.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
Thanking in advance to give your suggestion in order to resolve it.
With regards,
Ajit.Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Just for your information the User exits available for VT01n are
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning status
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Award points if helpful..
Thanks -
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
Find active user exit for a transaction code
Hi All,
Please help to find the active user exit for a transaction code.
for Ex. below is the list of user exits for package VA ( for creation of sales order and changing sales order). Let me know which user exit is active and which is not active.
Exit name Short text
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Thanks & Regards,
SabuGoto TADIR table give program id as R3TR ,Objec type as CMOD and execute.
You will get all active exits in system.
Exits related to SD may be in ZSD package. -
User Exit for CAT5 Transaction
Hi,
Kindly help in getting the User Exits attached with transaction CAT5.
Thanks in Advance.
Regards,
Sapnahello,
do not coppy the tcode into zreport. it is the biggest sin you able to do. if there is no explicit user exit look for BADI (put break point inside SXV_GET_CLIF_BY_NAME fm, execute tcode and u ll get all BADI related with CAT5) or you could use implicit user exits. there are spots in standard SAP code (each reports subroutine has them so you could add your custom code there), but you have to ensure that your code will not make any damage.
best regards,
dez_ -
User Exit For Co01 Transaction
Hi Friends,
When I create a production order in co01 Transition. Header Storage location should be filled based on order type. Please share user exit do the change storage location.
Regards,
Jyo
Moderator Message: Duplicate Post. Thread Locked
Edited by: kishan P on Oct 18, 2010 3:37 PMHi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta -
I need user exit for md11 transaction
hi,
whenever planned order is created or changed i need to fill ztable with that fields.which exit is useful for this requirement.
regards,
sreenivas.Hi Sreenivas,
Below are the user exits related to transaction MD11.
LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
LMDZU001 User exits in additional planning
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers -
How to find user exit for the transaction PBAW
Dear Freinds
In Recruitment ....PBAW(Job Advertisements--when we execute the
transaction PBAW ...we can find create Advertisement... > here will create posting
in this screen i have to add a field Status . could you please let me know how
i can add.. Is there any user exit through which i can add a field or there is any way...
as it is standard..
regards
Vamsi.Hello Vamsi,
This might be of help. It is a program to find user exits based on transaction codes. Just install it on your sandbox and see if it works for you.
http://www.erpgenie.com/abap/code/abap26.htm
KR,
Peter Linn -
User exit for MIGO transaction
I'm checking for user exit in Migo transaction
what I want to do is when I enter the PO# and try to save all the details ,it must trigger a pop-up(customized transaction) thru USEREXIT.
Thanks in advance.Hello Hema
These are the "old" customer-exits on ECC 5.0:
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
Regards
Uwe -
User exit / badi for transaction appcreate
Hi,
Can nyone help me in getting user exit / badi for transaction appcreate .
Cheers
kamleshHi Kamlesh,
Try below code to know the userexits for the given trxn code.
Regards,
Raj
*& Report ZTESTRAJ_USEREXITS
REPORT ztestraj_userexits
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
ENDFORM. " display_results -
BADI/User Exit for APO Transaction: /SAPAPO/SNPTLB
Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
VijayaHello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam -
User Exits for FI transaction at time of 'Save'
Hi All,
I'm looking User Exits for the FI transaction - FBD1.
I used CMOD to identify the user Exits available for the 'FBAS' package:
F050S001 - FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 - FIDCC1: Change IDoc/do not send
F050S003 - FIDCC2: Change IDoc/do not send
F050S004 - FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 - FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 - FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 - FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 - Balance Sheet Adjustment
FARC0002 - Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 - Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 - Line item display: Checking of selection conditions
RFKORIEX - Automatic correspondence
SAPLF051 - Workflow for FI (pre-capture, release for payment)
However I'm looking for an user exit that is called at the time of 'Save'. I'm looking to make some changes
so that no entry can be posted in the above transactions until a document has been attached. None of the User exits above seem to be available at the time of 'Save'.
Is there any OSS note for a User Exit/BADI that can be used at the time of 'Save' for these transactions?
Thanks in advance..
Deepika.Hi Deepika,
for your requirement you can use FI substitutions (entire document). Check transaction GGB1. They allow to change fields from FI tables (BKPF,BSEG,BSIK,BSAK, etc...)
Please remember to reward points if the answer is useful and eventually to close the post if it solves your problem.
Regards, Manuel -
Hyperlink in a User Exit for standard transaction?
Hi,
First off, I am a novice in ABAP. After some searching on the forums, I have found out that it is possible to have hyperlinks in an ABAP Programm.
Is it possible to change a standard transaction (through user exits) to add in this sort of functionality? For instance, a link in VA23 to jump to a remote portal? Is it possible? And if yes, could anyone give me an example of how this could be done? Links to documentation or tutorials would also help me.
Could such a functionality be added through a button in the same transaction instead of a simple hyperlink?
Thanks and regards
SameerThe SAP.Web.UI.Controls namespace is a collection of classes that allow you to create controls in an iView. SAP NetWeaver web controls run on the server and include form controls such as buttons, input fields and tables. Because web server controls run on the server, you can programmatically control these elements. SAP NetWeaver controls are more abstract than HTML server controls or Microsoft web controls from the System.Web.UI.WebControls namespace. Their object model does not necessarily reflect HTML or Microsoft web control interfaces. SAP NetWeaver controls reflect the SAP WebDynpro UI elements. They also implement the behaviour of SAP Unified Rendering, which allows custom UI branding by selecting and modifying CSS style sheets. This namespace includes the ViewElement class, which is derived from System.Web.UI.Controls.Control and provides all SAP server controls with a common set of functionality. Therefore you can also mix SAP NetWeaver controls with Miocrosoft web controls within an iView.
for more details on this please go through the below link.
https://www.sdn.sap.com/irj/go/km/docs/library/dotnet/pdk%20for%20.net/developer's%20Guide%20PDK%202.0%20for%20.NET/Reference/SAP.Web.UI.Controls.html
<b>Give points if useful</b>
related topics
http://help.sap.com/saphelp_crm50/helpdata/en/20/041c3a1cf1c54be10000000a114084/content.htm
http://help.sap.com/saphelp_crm50/helpdata/en/e7/43f438c842cc2be10000000a114084/content.htm -
User Exits for Vendor Transaction
In Vendor Master Display XK02, for Payment Transactions there is a Checkbox for Double Invoice. If the Invoice is already made, I want to raise a error message. Is there any User Exit for that Vendor Transaction to achieve this functionality.
Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
If there are no available user exits you could go for badi's.
To search for a badi, go to se 24 display class cl_exithandler. double click on method get_instance, get a break point on case statement. execute and start the required transaction in new session. look for variable exit_name. It would show the available badi's.
<b>please reward if useful...</b>
regards
dinesh -
User Exit for ME51N Transaction
Hi folks,
I have a requirement regarding ME51N Tocde. If the user enters the internal order number in ME51N, while creating Purchase Requisition, the corresponding cost center should be displayed in the cost center field by default. I have found one user exit which will be useful for this. I wrote the code and feteched the Cost Center value in the exit EXIT_SAPLMEREQ_005. But i dont field any paramet for sending the Cost center value here. Could any body suggest me how to proceed now...How can i display the cost center value, using this Exit....
Thanks in advance,
Shyam.Hi Shyam,
You can find the user exit using the following method:
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler=>get_class_name_by_interface'.
5. Then run your transaction ML81N.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
Hope this solves your query.
Regards,
Saumya
Maybe you are looking for
-
Export problem "A serious error has occured", or hang, upon export to Encore.
Hello, I am using adobe Premiere CS3 3.2 I am trying to export my project to a DVD. I've been told that the best way to do this with minimizing quality loss is to export to Encore. My project has some filters that affect system memory and have locke
-
Table name for the structure MEPO1211
Hi Friends, I want to find out the the Purchase Orders created with USD currency. This currency indicator is not available in the table EKPO. On checking the PO, the currency field is in the strucure MEPO1211. Kindly let me know the table name whe
-
Hi gurus, All the selection screen fields and the output should appear in the respective log on language. please verify above requirement ,inform me. Thanks, SReddy.
-
Is there an easy way to replace fonts in Photoshop ?
Is there an easy way to replace fonts in Photoshop without clicking on each text layer? We just got a new font system, so now our fonts don't match up. Looking for a fast/easy way to replace the fonts like in InDesign or Illustrator.
-
Password protect local mailboxes in Mail? + AOL Communicator ?
A friend wants to know if they can password protect local mailboxes like AOL Communicator on Mac OS X Mail. Anyone know how without FileVault? In addition if you know why she may be getting this error, that would be helpful too: "Failled to initializ