User exit in delivery

Dear Gurus
Is there any user exit to restrict (error message) if we pick less quanitiy of goods in delivery than in sales order while doing VL01N.
Regards
Sidhu

I presume you were talking about picking quantity and not the delivery quantity since obviously, delivery quantity should always be equal or less than the order quantity and system will not give any error while doing so.
If you are talking about picking quantity, you can deactivate the same in OVLP; of course, it is purely depending upon business requirement.  At the least, you can go for user exit which has already been suggested.
G. Lakshmipathi

Similar Messages

  • User exit in Delivery after the SAVE button is pressed.

    When the Delivery gets picked and Post Goods issued , the Delivery quantity for example instead of 48,000 LBS may be little less say 47,345 LB. We need to update this number in the order quantity which will originally have 48,000 LBS.
    I need to update this quantity in the sales order VA02 after the delivery is saved. Whats the user exit AFTER the save button is pressed?
    Thank you in advance

    Hi,
    Check this User Exits related to Delivery,
    Delivery related exits
    V50PSTAT - Delivery: Item Status Calculation
    V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
    V50R0001 - Collective processing for delivery creation
    V50R0002 - Collective processing for delivery creation
    V50R0004 - Calculation of Stock for POs for Shipping Due Date List
    V50S0001 - User Exits for Delivery Processing
    V53C0001 - Rough workload calculation in time per item
    V53C0002 - W&S: RWE enhancement - shipping material type/time slot
    V53W0001 - User exits for creating picking waves
    VMDE0001 - Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002 - Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003 - Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004 - Shipping Interface: Message SDPACK (Packing, Inbound)
    V02V0001 - Sales area determination for stock transport order
    V02V0002 - User exit for storage location determination
    V02V0003 - User exit for gate + matl staging area determination (headr)
    V02V0004 - User Exit for Staging Area Determination (Item)MV50AFZ1 - User Exits for Delivery Processing
    MV50AFZ2 - User Exit for Batch Quantity Allocation
    MV50AFZ3 - LIPS-KOQUI (Picking is subject to confirmation) determination
    MV50AFZK - The user exits in this include can be used to fill the condition tables for material listing and
    material exclusion (KOMKG and KOMPG) and product selection (KOMKD and KOMPD) with own data.
    MV50AFZL - In delivery creation process for sales orders there is the possibility to restrict the delivery creation to some order items.
    If these order items are member of a delivery group, but not all items of
    this delivery group are includes in the restriction range of the order item nubers, you can specify in this routine what to do.
    MV50AFZP - This user exit can be used to modify change mode of pricing screens in delivery processing.
    MV50AFZZ - Users Exit for Batch Determination; LIPS-LGORT determination
    Thanks & regards,
    Dileep .C

  • User Exit for Delivery Creation

    Hi,
    I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.

    Hi,
    I think you can try with MV50AFZ1 user exit.
    In move fields to LIKP and LIPS routine you can get the sales order.
    LIPS-VGBEL gives the sales order.
    Thanks,
    Rohan

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

  • Extended Idoc - User exit for delivery VL01 and Invoice VF01

    Hi Experts,
    We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
    I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.

    HI
    exits available for  VL01.
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
    V53W0001                                User exits for creating picking waves
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot
    V53C0001                                Rough workload calculation in time per item
    V50S0001                                User Exits for Delivery Processing
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List
    V50R0002                                Collective processing for delivery creation
    V50R0001                                Collective processing for delivery creation
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT                                Delivery: Item Status Calculation
    V02V0004                                User Exit for Staging Area Determination (Item)
    V02V0003                                User exit for gate + matl staging area determination (headr)
    V02V0002                                User exit for storage location determination
    V02V0001                                Sales area determination for stock transport order
    For VF01..
    Enhancement
    V61A0001                                Customer enhancement: Pricing
    V60P0001                                Data provision for additional fields for display in lists
    V60A0001                                Customer functions in the billing document
    V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
    V05I0001                                User exits for billing index
    SDVFX011                                Userexit for the komkcv- and kompcv-structures
    SDVFX010                                User exit item table for the customer lines
    SDVFX009                                Billing doc. processing KIDONO (payment reference number)
    SDVFX008                                User exit: Processing of transfer structures SD-FI
    SDVFX007                                User exit: Billing plan during transfer to Accounting
    SDVFX006                                User exit tax line in transfer to accounting
    SDVFX005                                User exit reserves in transfer to accounting
    SDVFX004                                User exit G/L line in transfer to accounting
    SDVFX003                                User exit cash clearing in transfer to accounting
    SDVFX002                                User exit for A/R line in transfer to accounting
    SDVFX001                                User exit header line in delivery to accounting
    J_3RSINV

  • User exit for  Delivery output execution

    Hello All,
             My query is i  need a delivery relevant  user exit for output trigger which the  specific order reason and for this only it should trigger in the VL01N (delivery) output. Kindly let me know if any user exit is there where i can give my condition(by checking the specific order reason from the proceding sales document)  and for that only it should trigger in the VL01N output . PLZ let me know the answer ASAP.

    Hi
    Check the following enhancements and BADI's
    Enhancement
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
    V53W0001                                User exits for creating picking waves
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot
    V53C0001                                Rough workload calculation in time per item
    V50S0001                                User Exits for Delivery Processing
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List
    V50R0002                                Collective processing for delivery creation
    V50R0001                                Collective processing for delivery creation
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT                                Delivery: Item Status Calculation
    V02V0004                                User Exit for Staging Area Determination (Item)
    V02V0003                                User exit for gate + matl staging area determination (headr
    V02V0002                                User exit for storage location determination
    V02V0001                                Sales area determination for stock transport order
    Business Add-in
    DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
    DELIVERY_PUBLISH                        Announcement of delivery data during database update
    Also look at the Standard program of Delivery SAPMV50A
    for the user exit Include MV50AFZZ
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • User Exit for Delivery Updating

    Hi,
    I am creating one user exit for delivery ,
    My condition:
    If XLIKP-UPDKZ (Update indicator) = Update (U).
    Read table Deferred COGS Activity (Z1009) with key
    Delivery Number  eq LIKP-VBELN.
    If sy-subrc <> 0
    Exit.
    Else.
    If V50AGL-WARENAUSGANG=X (PGI is active)
    Update table Z1009 with
    WADAT_IST = XLIKP-WADAT_IST
    PGI_ERNAM = SY-UNAME
    PGI_ERDAT = SY-DATUM.
    where Delivery Number (DL_NO) eq LIKP-VBELN.
    If delivery updated successfully then no problem ,
    if not updated then I need to through error message to log.
    I need Function Module for this.
    Can u help me.

    These ar all the User Exits used in VL01N.
    Exit Name           Description
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    You can also look at BADI: LE_SHP_DELIVERY_PROC. It has several implementations which could be useful to you.

  • User-exit for delivery while assigning serial numbers(urgent)

    hi all,
    can u plz tell me the specific user exit for delivery (VL01n) while assigning serial numbers?
      i am getting the serial numbers for material in database table OBJK .i am also getting these serial no.s in IQ01.
       while doing delivery,i am going for extra-->serial number.at this time one screen for serial number is comming.those serial numbers which are stored in objk will transfer to this screen of delivery automatically.
      for this , i want a specific user-exit for delivery so that i can transfer the serial nos from objk to that screen of delivery.plz suggest .(urgent )
    any idea is highly appreaciated
    Regards
    pabitra

    You can find from below list of user exists
    V02V0001            Sales area determination for stock transport order          
    V02V0002            User exit for storage location determination                
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)             
    V50PSTAT            Delivery: Item Status Calculation                           
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields     
    V50R0001            Collective processing for delivery creation                 
    V50R0002            Collective processing for delivery creation                 
    V50R0004            Calculation of Stock for POs for Shipping Due Date List     
    V50S0001            User Exits for Delivery Processing                          
    V53C0001            Rough workload calculation in time per item                 
    V53C0002            W&S: RWE enhancement - shipping material type/time slot     
    V53W0001            User exits for creating picking waves                       
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc           
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)      
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)       
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)

  • USER-EXIT for DELIVERY--very very urgent

    Hi all,
    can u plz tell me the user-exit for delivery i.e this exit should be called after the delivery order is created.
    plz suggest some specific exit.it is very very urgent.
    Regards
    pabitra

    Rout ,
    u cannt find out user exits after the Creation.
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    *        FORM-Routinen für Userexits
             include mv50afzz.
             include mv50afz1.
             include mv50afz2.
             include mv50afz3.          "Userexit neu zu Release 3.0A
             include mv50afzk.          "Userexit 4.6A (KOMKG/KOMPG)
             include mv50afzl.          "Userexit 4.6A Liefergruppen
                                                                   "n_693000
             include mv50afzp.          "Userexit for pricing screen input
    Regards
    Prabhu

  • User exits for delivery picking confirmation and transfer order creation

    Hi
    We have a scenario for which we need help.
    This is to do with replenishment from plant to plant.
    We have sales sets.
    The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
    we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
    The Tranfer order does not contain the components either.
    However post  the goods issue we  can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
    Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
    After confirmation of the TO then we want the picking status to be put as C.
    Supreeth

    Hi,
    Check the following users exits.
    MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
    MWMRFUP             Customer defined general purpose pushbutton called from scr.
    MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
    MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
    MWMRP003            Customer Exit for Replenishment using RLLNACH1
    MWMRP004            User Exit for Replenishment using RLLNACH4
    MWMTO001            Enhancements for end of transfer order generation
    MWMTO010            Exit: Calculation of Total Planned TO Processing Time
    MWMTO011            Correction of Planned Processing Time for TO Item
    MWMTO012            Correction of Sorting and Split Transfer Order
    MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
    MWMTOAU3            Separate selection of posting changes for autom.TO creation
    MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
    MWMD0001            Transfer order print via RLVSDR40
    MWMD0002            Transfer order print as multiple process with RLKOMM40
    MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
    MWMIDO11            Enhancement for message WMTORD: TO with several items
    MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
    MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
    MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
    Regards,
    Murali

  • User exit for delivery creation in VL10B/VL10G-

    Hi,
    Is there any exits available for restricting the document type while the deliveries are selected/processed using VL10B/VL10G - delivery creation in background.
    Scenario is when deliveries are created for STO's,the delivery is to be created for a selected document types(EKKO - BSART).Other types of document types have to be ignored when the delivery is created in background.
    Regards
    Deepak

    Hello Deepak
    You handle this through configuration while setting up Stock Transport Orders in MM.
    Path:  IMG/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order/Assign Delivery Type and Checking Rule
    Here you a Delivery type for a combination of Plant and PO type. So those PO types which you don't want to be included for delivery creation will not figure in this assignment. I don't think you should go down  the user exit route.
    If you still need to explore user exits, look at OSS note 198137 for a list and purpose of VL10X based exits.
    Hope this helps.

  • ERS user exit, pass Delivery note(LFSNR) in MIGO to Reference(XBLNR)in MIRO

    Hi Experts,
    I need to assign Delivery Note(LFSNR) in MIGO, to field Reference(XBLNR) in MIRO. that means "Reference " field must contain the delivery note information instead of Invoice doc number.
    how can i use component MRMH0001.where can i use?
    i am new to user exits.
    please help me. i need logic and steps.
    Thanks in advance
    Reward points will be given.
    Srinu

    hi
    Overview
    R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
    The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
    The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
    Benefits
    • Standard SAP functionality can be enhanced without modification to the standard code.
    • Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
    Configuring SAP Enhancements
    Basic Steps in Configuring an Enhancement
    • Find the appropriate Enhancement.
    • Enter the ABAP code in the "Z" program within the function module.
    • Create a project.
    • Add the Enhancement to the project.
    • Activate the project.
    Example Business Scenario for Enhancements
    Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
    to find the suitable exit for ur requirements check the following program
    Hi
    Find the available exits with the following program:::
    *& Report  ZFINDUSEREXIT
    report  zfinduserexit.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
    select single * from tadir where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir where pname = tstc-pgmna.
    select single * from enlfdir where funcname =
    tfdir-funcname.
    select single * from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name eq enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    select * from tadir into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct where sprsl eq sy-langu and
    tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    write the code in the right form and check by keeping a break point
    HI
    To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
    double click on method get_instance, get a break point on case statement.
    execute and start the required transaction in new session.
    look for variable <b>exit_name.</b> It would show the available badi's.
    also check the following links
    User Exit
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    <b>Please do reward if useful</b>
    Regards
    Dinesh

  • User exits for delivery note vl02

    i want to add some field in delivery note at item level susch as no of package per item for this which user exits  i use

    Hi,
    to find the user exits & Badi's for the T-code..
    go to table TSTC>enter T-code and execute> get the Program for the t-code..
    and go to-se38-->get the package attached to the t-code..
    next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                         execute you will get the list of exits
                                                         available...
                                                      -->enter package under Badi's tab and
                                                         execute you will get the list of Badi's
                                                         available... 
    All the User exits are stored in Table MODSAP..
    Prabhudas

  • User Exit for Delivery to add Profit Centre

    Hello All,
    I need the User Exit to Add the Profit Centre at Delivery level..!
    I tried in this MV50AFZ1 Form FORM userexit_move_field_to_lips.
    but its not working...
    So please let me know the userexit and the code..!
    Thanks in Advance
    Regards
    Babu

    Hi Prabhu..
    We need to maintain the profit center derivation rule in the delivery or billing document, i.e. if batch no starts as A- Profit center-1000, B -Profit center-2000. We have used some user exit in order and working fine. where as our client is interested to have same in delivery or billing document. The profit center should be determined as per batch no starts and not as maintained in the material master.
    now I did it in Delivery its working fine only in Delivery but its not carrying to Billing
    so please help me out which carries for entire cycle
    my code is like this
    Include MV50AFZ1
    FORM userexit_save_document_prepare.
    LOOP AT xlips.
    IF xlips-charg+0(1) EQ 'D'.
    xlips-prctr = '0000001000'.
    ELSEIF xlips-charg+0(1) EQ 'E'.
    xlips-prctr = '0000001200'.
    ELSEIF xlips-charg+0(1) EQ 'R'.
    xlips-prctr = '0000001300'.
    ELSEIF xlips-charg+0(1) EQ 'M'
    OR xlips-charg+0(1) EQ 'P'
    OR xlips-charg+0(1) EQ 'N'
    OR xlips-charg+0(1) EQ 'U'
    OR xlips-charg+0(1) EQ 'H'
    OR xlips-charg+0(1) EQ 'L'
    OR xlips-charg+0(1) EQ 'S'
    OR xlips-charg+0(1) EQ 'O'
    OR xlips-charg+0(1) EQ 'Y'
    OR xlips-charg+0(1) EQ 'B'
    OR xlips-charg+0(1) EQ 'A'
    OR xlips-charg+0(1) EQ 'I'.
    xlips-prctr = '0000009001'.
    ENDIF.
    XLIPS-UPDKZ = 'U' .
    MODIFY xlips.
    CLEAR xlips.
    ENDLOOP.
    ENDFORM. "USEREXIT_SAVE_DOCUMENT_PREPARE
    Thanks
    Regards
    Babu Aeda

  • Generate VICS BOL Number in User Exit For Delivery

    Hello,
    I have been asked to automatically generate a BOL for a delivery based  the Voluntary Interindustry Commerce Solutions (VICS) Association specifications.  However, I am having a difficult time finding the correct user exit in the delivery process. 
    Can any of you SD gurus point me in the right direction?
    Regards, Dean.

    I think I found the exit I needed EXIT_SAPLV56U_004. I was wrong about needing the exit for delivery, the requirement is the shipment.  
    With that said, I think I am on the right path but I was hoping that there was someone who has implemented the VICS Bill of Lading in SAP.  I found that the Handling Units -> External Identification seems to have all of the foundation for generating the BOL per the VICS specification.  However, there has been concern that if that was done, that something could cause an issue with Handling Units. Which we are using to generate labels for shipments.  
    So, has anyone used the Handling Units->External Identification for VICS Bill Of Lading generation? If so, anything I should be concerned about?
    Regards, Dean.

  • User Exit for delivery Date Update in ME41

    Hi,
    I want to Create one User Exit which will Update the Delivery Date of All Line Items ,same as of Item one.
    Detail : When creating RFQ using tcode ME41, create with Reference to PR, add your collective Number and copy few line items from your PR, say 5 items selected, now  when come to RFQ it asks to change item details if require,
    now here i want to change Delivery date of item one and when putting new delivery date, and press enter then it should update all (remaining 4 ) items delivery date same as of item one. so that user do not need to update all items delivery date one by one.
    is there any user exit/Enhancement Spot available which get triggered after pressing enter when changing the items?
    Thanks in advance.
    Regards,
    Sujeet

    Hi,
    Check these enhancements:
    ME590001           
    MEETA001           
    MEFLD004           
    MELAB001
    Jitendra

Maybe you are looking for