User Exit in iw22 screen
Dear all,
I want to use a user exit in IW22 screen to add notification time.
pls help me.
Thankx
No Screen Exit for IW22 i think it has only Function Exits
Custom Exits
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
BADIs
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
Edited by: Bala Krishna on Aug 20, 2008 4:00 PM
Similar Messages
-
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
I want to block the withdraw qty in MB1A screen.I used MBCFC003 AND MBCF0005 BUT I couldn't get the exact result.Is it user exit for MB1A screen -PPC00009.So can anyone tell me the exact user exit.
Regards,
Maran.dDear Maran,
What's your exact requirement?What do you want to block in MB1A T Code?
You want to restrict for 261 movement for an order or reservation in MB1A?
These are the exits that can be used for MB1A,
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011 Read from RESB and RKPF for print list in MB26
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009 Filling the storage location field
MBCF0007 Customer function exit: Updating a reservation
MBCF0006 Customer function for WBS element
MBCF0005 Material document item for goods receipt/issue slip
MBCF0002 Customer function exit: Segment text in material doc. item
Regards
S Mangalraj -
Hello All ,
I'm in need of a user exit or BADI which would help me validate
the items in Activities Performed/inspections tab of IW22. I have tried the following exits
IWOC0004
IWOC0003
IWOC0002
IWOC0001
IWO10027
IWO10026 , but they contain data only about the notification's header and there is no exporting parameter which would help me validate the items entered in the activities tab when SAVE buton is pressed in IW22.
Any suggestion or solution is welcome.
Regards,
Venkatesh.I think there may be some function modules which can be used in User-Exit of IW22 (Save operation), like CAUFV, similar to Function modules used in IW32 etc.
Please search Function Modules which reads the activity details (old / New) by CO* or CAUFV and let me know if useful.
Regards,
Manjunatha
Message was edited by:
Manjunatha Chary -
To find user exit and a screen exit for VD03
hi ,
can u please find if there is a user exit and a screen exit to add for adding a Z-field on for the customer master on the shipping tab. i.e VD03 transaction.
actually i have found the user-exit i.e exit_SAPMF02d_001.
but this exit is not triggering when i put a breakpoint.
so can u please tell me the solution for this.
regards,
soham pHi,
try these...
Enhancement/ Business Add-in Description
Enhancement
SAPMF02D User exits: Customer master data
Business Add-in
CUSTOMER_ADDRSCR_CHG Change Address Screen in the Master Data Maintenance
CUSTOMER_ADD_DATA Additional Data at Customers
CUSTOMER_ADD_DATA_BI Additional Data at Customers (Batch Input and ALE)
CUSTOMER_ADD_DATA_CS Additional Data at Customers (Subscreen Container 4000)
No.of Exits: 1
No.of BADis: 4
Arunima -
Screen /user exit for additional screen on sales order header
Hello sir's,
can anybody help me for this query---
Screen /user exit for additional screen on sales order header.
exit name.
Thanks in advance,
VikramHi,
SAP has provided screen modification. This you can do on "Additional data B" screen at both <b>header</b> and line iteam level.
Additional <b>header data is on screen SAPMV45A 0309</b>, additional item data on screen SAPMV45A 0459. These screens contain the <b>Include screens SAPMV45A 8309 ( this is the screen exit at header )</b> or SAPMV45A 8459 ( this is the screen exit at item ) as user exits. There few more exits you will have to code to get this screen works. The are,
MV45AOZZ - PBO module of screen
MV45AIZZ - PAI module of screen
MV45ATZZ - Global data definition for user-exit.
Check this link for more info regarding user-exit in sales docs.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
We have alredy implemented this solution at line item level. Let me know if you have any question.
Regards,
RS -
User Exit for IW22 for adding a TAB
Plz tell me the user exits if any,there ao add an additional TAB in IW22.
Vipinhi,
check this exits
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
screen exit
IW22 SAPLIQS0 IWOC0002 E EXIT_SAPLIQS0_001
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM1
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM2
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM3
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM4
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM1
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM2
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM3
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM4
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM5
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM6
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM7
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM8
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM9
QQMA0001 S SAPLIQS07790_USER0001_SAPZGEP_PCM0
QQMA0008 S SAPLIQS03030_USER0002_SAP 0
QQMA0008 S SAPLIQS03030_USER0002_SAP 0
QQMA0008 S SAPLIQS03030_USER0002_SAP 1
QQMA0008 S SAPLIQS03030_USER0002_SAP 2
QQMA0008 S SAPLIQS03030_USER0002_SAP 3
QQMA0008 S SAPLIQS03030_USER0002_SAP 4
QQMA0008 S SAPLIQS03030_USER0002_SAP 5
QQMA0008 S SAPLIQS03030_USER0002_SAP 0
QQMA0008 S SAPLIQS03030_USER0002_SAP 1
QQMA0008 S SAPLIQS03030_USER0002_SAP 2
QQMA0008 S SAPLIQS03030_USER0002_SAP 3
regards,
sandeep
Edited by: Sandeep patel on Jul 11, 2008 3:27 PM -
User Exit PO MM06E005 - Screen does not exist
Hello All,
I created a new object for user exit 'EXIT_SAPMM06E_012' in Development System. This user exit is under the enhancement MM06E005. The user exit EXIT_SAPMM06E_012 will be used to produce an error message when saving a PO.
After Transported the Project into Quality System and I tried running transaction ME22->Select one line Item record in table control -> (Menu) ITEM -> Confirmations -> Overview to confirm the PO. I have been getting a dump telling me that SAPLXM06 Screen 0111 Screen does not exist." This is because the screen exit was also included in the activation.
When I have deactivated the Project its working fine. This problem occurs only the activation of user exit.
Thanks & Regards
Sudheerhi,
the problem when activating the exit you would have checked or activated the screen which currently is there in the development system , or you would have activated the screens and put them in a different request or in $tmp so when the request having the exit got transaported the screen code or activation was not taken along.
Deactivate the exit and then deactivate the screens also.
and then try to activate and put all in one request : deactivated and activations.
Narayani
Message was edited by:
Narayani -
User exit for selection screen of Tcode VL31N, VL32N
Dear Experts,
I want to modify selection screen of tcode VL31N, VL32N. Please help me to send user exit Tcode VL31N, VL32N.
Thanks and regards,
DucTV1.Hi Patrik,
The ALV report is generating from a query AQZZ/SAPQUERY/MEMEVL31========, in which the field catalogue of the ALV is coming from normal list dispaly structure only, structure of which is coming from %goo structure.
Either try to find out an enhancement here , so that you can add fields over there.
Thanks and Regards,
Antony Thomas -
EXIT from a user exit to intial screen of MM01
hi friends,
I am working on MM01 user exit..after saving user exit ll trigger..and in one scenerio we need to come back to screen MM01 with message at task bar..
Please give some idea ..
regardswell to come back to your initial screen is quite easy.
goto mm01 on your initial screen and hit F1.
in the help hit the button technical information.
there you get some information. amongst them your dynpro number of the screen you are on. (ahhh BTW make sure you place you cursor on the main screen before doing above steps, otherwise you get the dynpro-number of the subscreen your cursor is placed on.)
Then at the end of your user-exit write: leave to screen (your dynpro number you identified with the steps above).
to place a status message i believe you already have to be on the dynpro on which you want it to display. this would mean you had to modify the PBO event of that dypro, and i dont think you want that.
but i dont see any other solution. maybe some other dude will post something about that -
Vendor User Exit at Initial Screen
Dear friends
When a vendor is created through XK01, I would like to control that if u201CAccount Group 1000u201D is entered then Purchasing Organization and Company Code fields must be mandatory before skipping them empty at initial screen. Although I found a user exit that controls the data on saving but itu2019s too late since after creation of vendor workflow will be triggered and until itu2019s approved no changes will be allowed.
Looking forward to your advice and thanks in advance.
Thanks and Best Regards,Hi,
Following are userExits of T-code XK01,
RFKRRANZ User exits: Accounts Payable Information System
SAPMF02K User exits: Vendor master data
To Activate User Exit or Implement it,
Use T-CODE CMODE.
First Check whether enhancement is assigned to a project in CMOD.
If it is not assigned, then assign it to a project by creating Project in T-Code CMOD.
After Assign Enhancement in project click on Components Button on Application bar of CMOD.
Click on Function Exit and Active the Include present in USER EXIT.
Write Your Code in the include fresent in UserExit.
There is a Active button at application Bar of T-code in CMODE to activate the exit.
Thanks & regards, -
Hi All,
In MD01 screen, you can find a field called <u>'User exit Parameter</u>".
The user will have 3 options to input the data into this field.
1. The User can enter single value... ex: E01
The user exit will execute the MRP Run based on this single value.
For this scenario, i have SAP standard code as follows.. (Pgm name: LXM61F01)
Here UXPAR will contain value 'E01'.
WHEN 'Z1'.
UXPAR = USER_PAR.
CONDENSE UXPAR.
WRITE UXPAR+0(3) TO DISPO.
IF DISPO IS INITIAL.
EXIT.
ENDIF.
IF MT61D-DISPO <> DISPO.
NO_PLANNING = 'X'.
ENDIF.
2. The user can enter multiple values... ex: E01, E03, E09.
The user exit should take these valuse into account and run the MRP.
The above code is meant for single value.
Now i have to develop the code for this scenario. How to build logic for this scenario as the UXPAR will have value "E01, E03, E09"...????
3. The user can enter values in range format... ex: E01-E05.
The user exit should take E01, E02, E03, E04 and E05 to run the MRP.
How to build the logic for this scenario..?????
Please Help me........
Regards
PavanCan anyone please look into this issue and help me out...????
Really appreciate your guidance in this regard....
Regards
Pavan -
hi,
While selecting material code in Purchase req screen I like to display the corresponding G/L account code in Account Assignment-->G/L Account field. Kindly give me the suggestion .
Thanks & Regards
R.VijaiCheck this MEREQ001 Customers' Own Data in Purchase Requisition USer Exit
Inside the above user exit you have a Screen Exit
SAPLMEGUI 0014 SUB0 SAPLXM02 0111
try with that -
Hi,
I have to check the authorization based on the user profile ESTAT and status profile STASM.
I have already written the code in exit SAVE notification.
It has to check the authorization before going inside the tr code.
Here, once the user goes inside the tr code he can change the user profile for which he is not having authorization and then he can save.
If anyone knows, please help me.
Thanks
Shivahi,
chose the bestr from the folowing
Transaction Code - IW22 Change PM Notification
Exit Name Description
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
regards, -
Screen user exit : program sapmv45a screen 8309
Hi,
I added fields to screen 8309 , but in the flow logic of the screen 8309 system is not allowing any code(call modules) to write ( i already given the access key and designed the screen) .
when i searched forums i came to one command
*{ INSERT "TR No" 1
module XXXX.
*} INSERT
i could not understand the above command .......
RamHi,
the code for screen Validation has to write in Include 'MV45AFZZ'.
Search for the T-code VA01--Check for form routine ""userexit_field_modification
" and add your manual code..
Regards,
Prabhudas
Maybe you are looking for
-
What can be done to fix error 7 message when trying to install itunes
i am trying to download itunes onto my hp pavillion computer with windows 7 and keep getting error y message--can anyone tell me in non nerd terms (im really tech unsaavy) how to fix the problem?
-
How to import and export trusted site
i have configured cisco sdm everthing loading fine from sdm to router when i lunch sdm give ip address 10.1.1.1 its showing one error untrusted site how do i fix that problem in mozila firefox == URL of affected sites == http://10.1.1.1 == User Agent
-
Bluetooth keyboard not working when prompted for wifi splash screen io7
I just upgraded to IO7 on my ipad and I use the apple bluetooth keyboard. However, when the WiFi splash screen appear to login using say Cisco's login the keyboard does not work. Meaning it does not accept keystrokes. Because the keyboard is paired t
-
Icons auto-arranging by name if right-click-align :(
Hi everyone! Since I installed Mavericks (now I have the latest OS X 10.9 - 13A603) when I right-click align button to align my desktop icons to the grid sometimes it works, but very often it sorts all icons by name!! Very annoying thing Anyone in he
-
Unable to find aperture library when set up wallpaper
This has stuggled me for around a year, ever since i upgrade to lion when it is available, i found its hard for me to change my wallpaper to the images located in my aperture library.It's simplely not showing up as a available option in the preferenc