User exit in material creation
Hi,
Can anyone help me to find a user-exit while saving a material in MM01? I need to validate the sales data of the material, table MVKE.
Regards,
Priya.
Hi,
MGA00001 is the enhancement which you can use to check the data while creating Material. All the data(like MARA, MARC, MVKE) are available during this enhancement.
If this solves your problem please close this Qn and award points.
Thanks
Vamsi
Similar Messages
-
User exit before TO creation to chage MAKTX field or FM to change it after
Hi all,
I need some WM Expertise help.
When I create a Sales Order from program (with bapicreatefromdata2) , the system automatically create a delivery, and then, a transfer order with no immediate confirmation. The TO is manual confirmed. In bapicreatefromdata2 I completed on each item line the field ARKTX with a description (Example: red - material description ). This field is automatically completed in delivery( same field ARKTX). But I need this description also in transfer order for each line (field MAKTX). The TO is created automatically and the field MAKTX is completed with the description from the material master.
So, I need an user exit before TO creation to change the field MAKTX. I have tried user exit: MWMTO001 and is not working I think because the TO is created with no immediate confirmation. Also I putted break-point everywhere in program SAPML03T (standard program for TO creation) and I changed the settings in debugger mode. I checked System Debugging and Update Debugging. Nothing happened. I cannot find the place before TO is created.
An alternative to this is to update LTAP (item table for TO) after TO immediate creation in include MV45AF0B_BELEG_SICHERN but I can't find a function module to update the table before TO manual confirmation. I tried L_TO_UPDATE_PREPARE but this I think is for confirmed TO.
Any one who worked on this kind of things, Please help.
Thanks in advice,
Bogdancheck these exits....
EXIT_SAPMM06E_012
<b>EXIT_SAPMM06E_013</b>
EXIT_SAPMM06E_014
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_018
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
vijay -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
PC-WQS: User exit for material valuation
Hello,
Currently we use data from the purchase info records to carry out material valuation of raw materials in the cost estimate. The client would like to get this data from the contracts instead of the info records since all purchase orders get information from the contracts. The second reason is that maintenance of the info record is very cumbersome and prone to errors when creating or updating the cost/ quantity.
My question is, has anyone used the user exit COPCP005 - User exit for material valuation (strategy U) in the valuation variant and has anyone gone after the contracts to get the purchase price?
If yes, I would like to know how you did it.
Thanks,
dineshCan you explain a little more where you encountered the problem?
1. Is there a Val Strategy before the Val Strat U that is probably able to find a price for costing?
2. Is the User Exit being triggered?
3. Can you run CK11N in the debug mode (/h) and check if the User Exit is triggered?
4. If all of these occur, the problem probably lies in the ABAP code... check for changes in the material number range or plant codes, or the plant-specific material status - the system does not valuate if the status does not permit it to.
If nothing works, come back with confirmation of the above and we'll go forward from there.
Cheers. -
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
User Exit for Delivery Creation
Hi,
I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.Hi,
I think you can try with MV50AFZ1 user exit.
In move fields to LIKP and LIPS routine you can get the sales order.
LIPS-VGBEL gives the sales order.
Thanks,
Rohan -
MIRO user exit at material document creation
I need to find out where or how material documents are created. Right now we have one material document per day per invoice so a single document can have many payments made against it (if they are made in the same day). What I need to do is change it so that each payment has its own material document. If you have 3 payments against invoice 001 in the same day then you have three material documents against that invoice instead of just one.
I am assuming this is done, or can be changed, in a user exit. If not is this a configuration issue?
Regards,
DavisHere is the list of User Exits and BADIs for MIRO.
Enhancement/ Business Add-in Description
Enhancement
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE Business Add-In: Logistics Invoice Verification -
User Exits for Invoice creation ,cancellation and sales return
Hi Gurus,
Pl help me it's very urgent.
I did not find any user exit invoice creation so i wrote the following code in include program
MV60AF0B_BELEG_SICHERN.
This code is to update the Z*table while saving invoice ,cancellation and sales return.
The code modification is like below
FORM BELEG_SICHERN *
Buchen Fakturabelege *
FORM BELEG_SICHERN.
READ TABLE XVBRK INDEX 1.
IF SY-SUBRC NE 0.
CALL FUNCTION 'DEQUEUE_ALL'.
MESSAGE S032.
EXIT.
ENDIF.
IF SAMH_MOD = ON.
EXPORT XKOMFK TO MEMORY ID 'SDBILLDL'.
ENDIF.
DATA: CALC_TYPE.
IF REBATE_DETERMINED = 'Y'.
CALC_TYPE = 'A'.
ELSE.
CALC_TYPE = 'I'.
ENDIF.
*{ INSERT RD1K903017 1
Work Area*********************
data : wa_xvbrk type VBRKVB.
data : wa_xvbrp type vbrpvb.
data : wa_zmigo type zmigo.
data : wa_vbrp type vbrp.
Internal table Creation*******
DATA: BEGIN OF tab_XVBRP OCCURS 100.
INCLUDE STRUCTURE VBRPVB.
DATA: END OF tab_XVBRP.
data : begin of tab_vbeln occurs 10,
vbeln type vbrk-vbeln,
knumv type vbrk-knumv,
end of tab_vbeln.
data : tab_zmigo type table of zmigo.
data : tab_vbrp type table of vbrp.
*****Data declaration*************
data : v_no_of_inv type i.
data : v_vbeln_no(10) type n.
data : v_last_inv_no(10) type n.
data : v_first_inv_no(10) type c.
data : v_tot_qty type i.
data : v_frbnr type mkpf-frbnr.
*******Ranges*********************
ranges : r_vbeln for vbrk-vbeln.
*****Populating IT****************
tab_xvbrp[] = xvbrp[].
describe table xvbrk lines v_no_of_inv.
*} INSERT
CALL FUNCTION 'RV_INVOICE_DOCUMENT_ADD'
EXPORTING
VBSK_I = VBSK
WITH_POSTING = 'A'
PREISFINDUNGSART = CALC_TYPE
IMPORTING
VBSK_E = VBSK
TABLES
XKOMFK = XKOMFK
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBSS = XVBSS
XVBRK = XVBRK
XVBRP = XVBRP
XVBPA = XVBPA
XKOMV = XKOMV.
*{ INSERT RD1K903017 2
data : v_count type i,v_fkimg type i .
data : v_no_of_records(10) type n.
wa_xvbrk = xvbrk.
********Selecting the last rec no from ZMIGO
select max( sr_no ) from zmigo into v_no_of_records.
*****If Distribution channel is not ZB*********
if wa_xvbrk-vtweg ne 'ZB' and ( wa_xvbrk-fkart = 'ZRIN' or wa_xvbrk-fkart = 'ZRTE' ).
if v_no_of_inv = 1. " Process only when there is one invoice
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
endloop.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
clear v_no_of_inv.
else. "When there are Split Invoices
v_last_inv_no = wa_xvbrk-vbeln.
v_vbeln_no = v_last_inv_no - v_no_of_inv + 1.
v_first_inv_no = v_vbeln_no.
sort tab_xvbrp by vbeln.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = v_vbeln_no. "wa_vbrp-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = v_vbeln_no.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
at end of vbeln.
v_vbeln_no = v_vbeln_no + 1.
endat.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
endloop.
endif. "End of first 2nd IF.
clear : v_no_of_inv, v_vbeln_no.
endif.
****************Sales return************************************
if wa_xvbrk-fkart = 'ZRRE' and wa_xvbrk-vtweg ne 'ZB'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '651'.
condense wa_xvbrk-xblnr.
wa_zmigo-reference = wa_xvbrk-xblnr.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg, v_frbnr.
endloop.
endif.
*******Invoice Cancellation*****************************
if wa_xvbrk-fkart = 'ZRS1' and wa_xvbrk-vtweg ne 'ZB'.
delete tab_xvbrp[] where shkzg eq 'X'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
condense wa_xvbrk-zuonr.
wa_zmigo-reference = wa_xvbrk-zuonr.
wa_zmigo-mtype = '602'.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg.
endloop.
endif.
clear : v_no_of_records.
*} INSERT
CALL FUNCTION 'STACK_RESET'.
R185D-DATALOSS = SPACE.
FOLGEAUFRUF102 = SPACE.
PERFORM SETPAR_INIT.
*{ INSERT RD1K903017 3
*} INSERT
LEAVE.
ENDFORM.
This program is working fine for single user but in production where no of people are creating the invoices from different places the data is not getting updated in table ZMIGO.
sometime populating with wrong data , partial data and sometimes no updation at all.
I have used the table locking system enqueue and dequeue FM's before n after updation but still the same
thing is happening.
What could be the reason.
Looking for help very urgent any other alternate option.Hi,
Go thru these..
Enhancement
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line (transfer to accounting)
SDVFX003 User exit: Cash clearing (transfer to accounting)
SDVFX004 User exit: G/L line (transfer to accounting)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit: Tax line (transfer to accounting)
SDVFX005 User exit: Reserves (transfer to accounting)
Business Add-in
SD_CIN_LV60AU02 BADI for billing
If it is helpful rewards points
Regards
Pratap.M -
Need of User-Exit in the creation of Sales Order(VA01)
Hi,
In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
Thank you.the following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod -
User Exit/ BADI during creation of vendor master
Dear Friends,
During creation of vendormaster if the with holding tax is maintained then PAN no. field should be made mandatory.
So far I know this can't done through standard field selection of vendor master. So this is to be done through BADI/User exit. Please provide me the same where in run time I can get PAN no field. It comes from the excise table.
RegardsFirst try for any Customization is available.
If not we can achieve with enhancement point.
Try to find out an implicit enhancement point on PAI event of the screen there validate for the "PAN No"
if the "PAN No" is blank raise an error message & EXIT from the PAI.
It would serve your purpose.
Regards.
Abhijit -
BADI or User Exit - Change Material Document(GL/Account) before posting
Hi,
I want to change the MSEG and FI Posting values before the material documet is posted. I am not using the transaction MIGO for the material document posting. The material document which has to be changed was created during the stock adjustment (MI01,MI02,MI07.etc)
The Details I want to change is "GL Account No" based on
storage location. Since I cannot solve this requirement throught customization, I need a way to achive this using
user exits or badis..
Points will be rewared.
Prasath
Edited by: Prasath Kumar R on Jul 24, 2008 1:18 PM
Edited by: Prasath Kumar R on Jul 24, 2008 1:18 PMHi ,
What you advised is right, But my customer demands to set the Gl Account at Storage location level.
Is there any way that i can change GL/Account after Posting....????!!!! I hope it also not possible..
Plz advise..abt my assumption.
Regards
Prasath
Dear All,
Please let me know the possiblity of achiveing the above reqmt. Your suggestions will be helpful..
Regards
Prasath
Edited by: Prasath Kumar R on Jul 25, 2008 9:33 AM -
User Exit for material valuation is not called up
Dear all,
We want to add special logic when user process the material valuation through CK11N.
We have also activated the project with the user exit COPCP005, changed valuation variant to "valuation price with user exit" and modified ZXCKAU08 in the component EXIT_SAPLCK21_002.
And this special logic is correctly workd on development but we are not able to get the desired result on pre-production and production.
Could you please guide that I check anything more?
Thanks in advance.
SK Roh.Can you explain a little more where you encountered the problem?
1. Is there a Val Strategy before the Val Strat U that is probably able to find a price for costing?
2. Is the User Exit being triggered?
3. Can you run CK11N in the debug mode (/h) and check if the User Exit is triggered?
4. If all of these occur, the problem probably lies in the ABAP code... check for changes in the material number range or plant codes, or the plant-specific material status - the system does not valuate if the status does not permit it to.
If nothing works, come back with confirmation of the above and we'll go forward from there.
Cheers. -
Hi expert,
Are there some user exit that i can used for PR creation? I need this exit to set default value for certain field at item level when create PR.
Please advise.
Thanks
Message was edited by:
ari harsyantoHi,
Have you checked the components of enhancement: MEREQ001?
Please check. Hope this helps.
Best Regards, Murugesh AS -
HR ABAP : User Exit after Position Creation
Hi,
We had a requirement of automatic creation of certain Relationships after the creation of position in HR.
Is there any USER EXIT for such cases?
I need an user exit which should get triggered after the creation of the Position.
Can anyone let us know the enhancement name if it exists?
Regards,
<i><b>Raja Sekhar</b></i>Hi Raja Shekhar,
Chk this link...this might help you out.
http://www.planetsap.com/Userexit_List.htm
Reward points if you find this as a right solution
Regards,
Harini -
User exit for delivery creation in VL10B/VL10G-
Hi,
Is there any exits available for restricting the document type while the deliveries are selected/processed using VL10B/VL10G - delivery creation in background.
Scenario is when deliveries are created for STO's,the delivery is to be created for a selected document types(EKKO - BSART).Other types of document types have to be ignored when the delivery is created in background.
Regards
DeepakHello Deepak
You handle this through configuration while setting up Stock Transport Orders in MM.
Path: IMG/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order/Assign Delivery Type and Checking Rule
Here you a Delivery type for a combination of Plant and PO type. So those PO types which you don't want to be included for delivery creation will not figure in this assignment. I don't think you should go down the user exit route.
If you still need to explore user exits, look at OSS note 198137 for a list and purpose of VL10X based exits.
Hope this helps.
Maybe you are looking for
-
I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?
-
Dear Experts When i chk the update optimizer statistics, there are 26 missing indexes, please help me how to rebuild the missing indexes. regards varun
-
Notification Center design flaw
When i open notification center i cannot access or see the options button at the bottom of the pane. They are right behind my recycle bin. My dock seems to cover the notification pane stopping me from accessing this. Obviously i can access the option
-
Locked Contract account can be cleared at Cash Desk
Dear Experts, I have placed a Clearing lock on a Contract Account(tcode CAA2). But the due amounts on that contract account can still be cleared through the cash desk FPCJ. Where should the lock be placed to prevent all incoming payments for a partic
-
Grant / grant management dependancy on Funds Management
Hello experts, Based on a quick look at documentation, I am not sure if GM requires FM or not. If you have organization which does not have a requirement to use FM (commitment items etc.) but has a large number of projects with multiple financing sou