User-exit in me21n or me22n
Hi gurus,
i have a requirement to make ME21N/ME22N-> item-> Invoice's tax code modifiable for certain conditions and add a checking for the jurisdiction code.
how shall i do that?
i tried looking for exits that the transaction passes through but MEPO1317-mwskz(tax code) and MEPO1317-txjcd(jurisd. code) are not global and therefore are unknown to those exits.
please help.
tnx,
navi
tnx for that info gustavo.
anywayz, i need to modify the screen of the invoice tab.
as of the present, tax code is not modifiable.
user can't manually enter data onto the screen.
the requirement needs it to be modifiable under certain conditions.
how to do that?
Similar Messages
-
User Exit transaction ME21N and ME22N in the save moment
Hi, all. I need one user exit to transaction ME21N and ME22N for SAVE.
I need name user exit please in the save moment.
Message was edited by:
Martínez Vásquez Rubén Dario
Message was edited by:
Martínez Vásquez Rubén DarioHi,
Please check this user exits.
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer's Own Data in Purchasing Document
EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_017 are the best place to change line item. I used in both places again it depends on your requirement for PBO or PAI.
By the way, what do you mean by actualization?
Regards,
Ferry Lianto
Please reward points if helpful. -
User exit - for ME21N, 22N, 23N - at line item level
Hi,
I want to add new text field to display the description of the MPM(material) in it.
That filed I want to add to the Account Assignment tab at item level.
How to add that field on the screen, I mean any screen exit for this?
and function module to pass the data to that field.
If anybody worked on such problem then pls. let me know.
Thanks in advance.
-- UmeshHi,
These are the user exits for me21n.
AMPL0001
LMEDR001
LMELA002
LMELA010
LMEQR001
M06B0001
M06B0002
M06B0003
M06B0004
M06B0005
M06E0004
M06E0005
ME590001
MEETA001
MEFLD004
MELAB001
MEVME001
MM06E001
MM06E003
MM06E004
MM06E005
MM06E007
MM06E008
MM06E009
MM06E010
MMAL0001
MMAL0002
MMAL0003
MMAL0004
MMDA0001
MMFAB001
Regards
praveen -
Hi,
Is there any user-exit for ME21N, thru which the below 3 values can be changed?
Goods-Receipt (EKPO-WEPOS)
Inv.Receipt (EKPO-REPOS)
GR-Based IV (EKPO-WEBRE)
Any pointers on this would be appreciated. Thanks in advance.
Rgds,
Bhargav.Hi,
chk the following userexits..
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
regards,
nagaraj -
HI all,
I want to add a function module when a Purchase order is saved(ME21n), i want to know how to find user exit for ME21n & which user exit to be changed.
I want to call a function module when the user saves the purchase order, please help.
Please also let me know the step to find the user exits.
Thanxs in advance.Hi,
Please check enhancement MM06E005 (SMOD).
Here list of User exit and BADI for ME21N .
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
USER EXIT
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
M06B0002 Changes to comm. structure for purchase requisition release
Business Add-in - BADI
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Docs
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MM_EDI_DELFOR_OUT Enhancements for IDoc Output of SA Releases: Internal
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_EDI_ORDERS_OUT Enhancements for IDoc Output of Purchase Order: Internal
SMOD_MRFLB001 Control Items for Contract Release Order
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Change)
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Change)
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Create)
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIP_REF_CHAR Facilitates Reference Characteristics in Purchasing
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
<b>Reward points</b>
Regards -
Badi & User Exit for ME21N & ME22N
Hi,
My requirement is when a Purchase order is created using ME21n or when a line is added or changed using ME22n, the system should copy the vendors tax jurisdiction to the purchase order line items jurisdiction code. I tried badi (ME_PROCESS_PO_CUST) but could not suceed. Can any one tell me if any badi or user exit available for the same???
Thanks in Advance.hi,
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima -
User Exit PO - ME21N/ME22N - Foreign Trade Item
Hi,
I need to change some values in the PO Item (Foreign Trade Item) -> Import tab -> declaration--> Import/Export
The way to do it is via user exit. I need to set Dispatch country (EIPO-SEGAL) = Import /Export).
I found the SAP Enhancement : V50EPROP which has 6 user exits. I tried
EXIT_SAPLV50E_004 but this is only called upon PO creation. Although I put the above logic in EXIT_SAPLV50E_004, it gets cleared off somewhere.
For change mode/create mode, it will hit EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006. But I couldnt change any of the EIPO values.
Has anyone done this before?
Please advice.
SandeepHello Sandip,
I had a same kind of requirement in which i have to update the field "Preference code" from a custom "Z" table through an exit. The exit "XIT_SAPLV50E_004" works fine for Creation mode (me21n). But during change mode it's not getting into the code defined in the include of the component.(it's not triggered.)
I checked the exits suggested by Hinojosa but the first one "EXIT_SAPLV50G_001" doesn't have PO and line item as import criteria and hence that can't be used.
While checking the second exit "XIT_SAPLV50G_002" , I found that it doesn't have export parameter as EIPO table. Which can be used to overwrite the value of Preference code (EIPO-PREFPACOD).
So if your issue has been resolved, could you please suggest how to proceed?
Regards,
Sushanta -
BADI/user exit for ME21N - Warning message for "our reference" field
Dear all,
I have a problem.
In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
I've tried in two methods.
1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
Why is my warning message always got override?
Please advise.
Thanks in advance
AhmadHi Ahmad,
Check the below links:
Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
Warning message in me22n check user-exit can't process?
Custome warning message in T. code me51n me52n & me21n , me22n
Regards,
Nisha Vengal. -
User exit for change PO (me22n) for save header and item text.
Hi Experts,
I have a requirement to read the header texts/item text at run time .
please tell me is there any save user exit for tc me22n .
Thanks in Advance.
PareshTransaction Code - ME21N Create Purchase Order
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
No of Exits: 35
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal -
Hello All,
A code has been written in the User exit for Tcode ME22N, Which sets the indicator on PO line item. This has been done by modifying the standard itab POT by using field symbols, because the fields to be modified are shown in display mode in the tcode ME22N and cannot be done in BDC. See the below code in user exit ZXM06U43.
DATA char(50) VALUE '(SAPLMEPO)POT[]'.
CLEAR wa_ind.
FIELD-SYMBOLS <f1> TYPE ANY.
Move memory of internal table POT to field symbol f1.
ASSIGN (char) TO <f1>.
Move content of f1 to internal table i_ind
i_ind[] = <f1> .
LOOP AT i_ind INTO wa_ind.
IF wa_ind-pstyp = '9'. " Service PO - item category
IF PO Line item has History per Purchasing Document as 'D'
Set indicators on, for the line item.
CLEAR v_cnt.
SELECT COUNT( * ) INTO v_cnt FROM ent5100
WHERE ebeln = wa_ind-ebeln
AND ebelp = wa_ind-ebelp
AND bewtp = 'D'.
IF sy-subrc = 0.
wa_ind-wepos = 'X'. " Set Goods Receipt Indicator
wa_ind-webre = 'X'. " Set GR-based IV Indicator
wa_ind-lebre = 'X'. " Set Srv-based IV Indicator
ELSE.
*End of addition SAP-20070910104025 - SL36 - D01K963369
wa_ind-wepos = ' '. " Clear Goods Receipt Indicator
wa_ind-webre = ' '. " Clear GR-based IV Indicator
wa_ind-lebre = ' '. " Clear Srv-based IV Indicator
wa_ind-xersy = ' '. " Clear ERS Indicator
ENDIF.
MODIFY i_ind FROM wa_ind INDEX sy-tabix.
ENDIF.
ENDLOOP.
<f1> = i_ind[].
ENDIF.
ENDIF.
This code is in production and has been working fine.
The requirnment is now to make this indicator work for all the Purchase order before this code has been written in the Exit. For this my functional suggests that to write a separate program using BDC for PO change and jus add a period/dot in the short text and save it. The code has been written, the user exit and the above code is getting triggrred values are updated in internal table correctly.
However the flags was not set or cleared when seen in the tcode ME22N . This works fine if the tcode me22n is run directly and not working in BDC.
I have tried with ME22 without enjoy transaction in BDC changing the POT Program to SAPMM06E. It does not work.
Please help me as why it is not uodating in the table when using BDC.
Thanks in Advance.
Senthil KumarHi All,
Any luck on this??
Thanks -
User Exit/BAdI for transaction ME22N - Release status of PO
Dear All,
Requirement: Irrespective of any change to a PO having its release indicator set to approved, the release indicator must not get updated.
As of now, editing a PO (using ME22N) leads to the updation of release group, release strategy and release indicator - this should be prevented from happening for all POs that have a release indicator set to Approved.
We know that in the system, this is determined in the FM ME_REL_STRATEGIE_EKKO. However we are using the version 4.6C and not being able to find a suitable user exit or other enhancement option. Can someone help us with a way to prevent this change from happening.
Regards,
NimishHi,
Did you check the BAdi: ME_PROCESS_PO_CUST.
Reddy -
User exit for ME21N for displaying the tax code from custom table
Hi,
I have a requirement, in our system, the inforecord is not maintain for all the material and vendor combination, we have a custom table in which we have maintain the
Compnay code, Pur. Org., Vendor code Tax code, juridiction code
now we want that when a Po is created with ME21 or ME21N the tax code and jurisdiction code should be come from this table and if entry not found in this table then it should search as per the regular process like from last Po or info record. then which user exit we can use for this.
regards,
zafarCLOSE
-
hi everybody
I have added 2 additional fields(zzqty, zzprice) at item level in PO, Ive also added the subscreen in me21N
My requirement is that these 2 fields should be copied from the fields menge and netpr for each line
I have coded the following in the user exit
EXIT_SAPMM06E_016
DATA: ekpo type ekpo.
ekpo = i_ekpo.
ekpo-zzqty = i_ekpo-netpr.
ekpo-zzprice = i_ekpo-netpr.
FREE MEMORY ID 'CUS_AKTYP'.
EXPORT aktyp FROM I_AKTYP TO MEMORY ID 'CUS_AKTYP'.
EXIT_SAPMM06E_018
data: ekpo type ekpo.
move-corresponding ekpo to e_ci_ekpo.
but its not working
can somebody tell me wat im missing?if you can tell me what you want to achieve , i can tell you what to code.
but as of now you can try with the below coding,
EXIT_SAPMM06E_016
DATA: ekpo type ekpo.
ekpo = i_ekpo.
ekpo-zzqty = i_ekpo-netpr.
ekpo-zzprice = i_ekpo-netpr.
EXPORT ekpo FROM ekpo TO MEMORY ID 'SOMEID'.
EXIT_SAPMM06E_018
data: ekpo type ekpo.
import ekpo to ekpo from memory id 'SOMEID'.
"this id is should be same as above
move-corresponding ekpo to e_ci_ekpo. -
User exit for ME21N (Not functional or customer exit)
Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PMHi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it. -
User exit or BADI for ME22N transaction (please read my requirement)
In me22n transaction when i change a PO Delivery date for any line item and click on save The field latest GR date MEPO1313-LEWED in DELIVERY tab below should display date as per my requirement i.e (delivery date + 90 days)
What uerexit is to be used else if BADI is used pleasee provide me step by step guide as i have never used vadi
IT is urgent. plz helopp.Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
Execute the report, give the transaction you want to find user exit, and query.
<b>BADI</b>
To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable <b>exit_name.</b> It would show the available badi's.
Please do reward if useful
Regards
Dinesh
Maybe you are looking for
-
Creating a Virtual Disk using Diskpart
Hi, I'm trying to study for a test on Windows 7 and I'm trying to install a Virtual disk and I keep getting the same error. The drive has been "cleaned" using the diskpart utility and is a 300 gb drive. here is the code that I used and the error as c
-
Error while executing one query in SAP B1
Experts, select T0.U_ItemCode, T0.U_ItemName, T0.U_Forecast, SUM(T0.U_mrpqty)'Simulated Qty', (select sum(onHand) from OITW T1 where T1.ItemCode = T0.U_itemcode) 'Current Quantity', (select T3.ItmsGrpNam from OITM T2 inner join OITB T3 on T2.ItmsGrp
-
How do you define graph scales live?
Hello, I am having an issue with a simple VI I am trying to create that displays test data. A little background on the setup: I have an Agilent 34970A data logger recording thermocouple data every 30 seconds which gets appended to a .csv file. My VI
-
My music library has the cloud next to it both on my phone and computor. I can not listen to music when movile unless i download this when on wifi or data. Why is this constantly happening, I have switched phones and now my complete library on my mac
-
Recent Aperture Update Not Exporting IPTC Info?
Has anyone else noticed that when exporting an image from the most recent update of Aperture, the exported image/jpeg no longer contains any of your IPTC Metadata? Facebook sees none of the captions nor does WordPress. These two issues alerted me to