User exit in Production Confirmation

Hi Experts,
I need to fill the a custom pallet table when the material document is created in transaction CO11N. And I need to do few validations and if those fails I need to reverse the material document.
I found few user exits with the material document data but when I query the database table MSEG or MKPF with the material document number in the user exit, it is not giving me any data. That means the document is not yet created. So, at this point of time I cannot completely validate my data and I cannot reverse the material document as there is no document created actually.
Could you please give a user exit which will be called after the creation of material document?
Thanks in advance.

User exits which you can use would be - CONFPP02 to CONFPP06, so evaluate with your abaper which one suits your specific need.
Hope the above helps.
Regards,
Vivek

Similar Messages

  • User exit for Production Order status

    Hi all ,
    Pl tell me about the : user exit for Production Order status
    ( i want CLSD status after settlement of the Production order .)
    regards,

    Hi,
    for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
    But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
    Also BADI WORKORDER_UPDATE could be interessting for you.
    Regards,
    Sabine

  • User Exit for Production Order confirmation with CO15

    Hi All,
    what User Exit I should use when validating batch when we do Production Order confirmation with CO15.
    Not when we create or release a Production Order.
    Will reward,
    mindaugas
    Edited by: Mindaugas Kazlauskas on Jan 30, 2008 5:03 PM

    Hi
    The Follwing Userexits available:
        Transaction Code - CO15                     Enter Production order Confirmation
    Enhancement/ Business Add-in            Description
    Enhancement
    CONFPP01                             
      PP order conf.: Determine customer specific default values
    CONFPP02                               
      PP order conf.: Customer specific input checks 1
    CONFPP03                              
       PP order conf.: Cust. specific check after op. selection
    CONFPP04                             
        PP order conf.: Customer specific input checks 2
    CONFPP05                               
       PP order conf.: Customer specific enhancements when saving
    CONFPP06                               
       PP Order Confirmations: Actual Data Transfer
    CONFPP07                               
       Single Screen Entry: Inclusion of User-Defined Subscreens
    CONFPS01                              
       PS confirmation: Determine customer specific default values
    CONFPS02                               
      PS confirmation: Customer specific input checks 1
    CONFPS03                             
        PS confirmation: Customer specific check after op. selection
    CONFPS04                              
       PS confirmation: Customer specific input checks 2
    CONFPS05                              
       PS confirmation: Customer specific enhancements when saving
    CONF0001                               
      Enhancements in order confirmation
    CONFPI01                              
       Process order conf.: Calculate cust.specific default values
    CONFPI02                               
       Process order confirmation: Customer spec. input checks 1
    CONFPI03                              
       Process order conf.: Cust. spec. check after op. selection
    CONFPI04                               
       Process order conf.: Customer specific input checks 2
    CONFPI05                              
       Process order conf.: Cust. spec. enhancements when saving
    CONFPI06                              
      Process order confirmation: Actual data transfer
    CONFPM01                             
        PM/SM order conf.: Determine cust. specific default values
    CONFPM02                             
        PM/SM order confirmation: Customer specific input checks 1
    CONFPM03                               
    PM/SM order conf.: Cust. spec. check after op. selection
    CONFPM04                              
       PM/SM order conf.: Customer specific input check 2
    CONFPM05                              
       PM/SM order conf.: Cust. specific enhancements when saving
    If it is helpful rewards points.
    Regards
    Pratp.M

  • User Exit For Production Order Confirmation Using CO15 or COGI

    Hi all,
    I need user exit for the production order confirmation so that i can set
    AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......
    Thanks

    hi,
    check these exits.
    CONFPP01                                PP order conf.: Determine customer specific default values
    CONFPP02                                PP order conf.: Customer specific input checks 1
    CONFPP03                                PP order conf.: Cust. specific check after op. selection
    CONFPP04                                PP order conf.: Customer specific input checks 2
    CONFPP05                                PP order conf.: Customer specific enhancements when saving
    CONFPP06                                PP Order Confirmations: Actual Data Transfer
    CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
    CONFPS01                                PS confirmation: Determine customer specific default values
    CONFPS02                                PS confirmation: Customer specific input checks 1
    CONFPS03                                PS confirmation: Customer specific check after op. selection
    CONFPS04                                PS confirmation: Customer specific input checks 2
    CONFPS05                                PS confirmation: Customer specific enhancements when saving
    CONF0001                                Enhancements in order confirmation
    CONFPI01                                Process order conf.: Calculate cust.specific default values
    CONFPI02                                Process order confirmation: Customer spec. input checks 1
    CONFPI03                                Process order conf.: Cust. spec. check after op. selection
    CONFPI04                                Process order conf.: Customer specific input checks 2
    CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
    CONFPI06                                Process order confirmation: Actual data transfer
    CONFPM01                                PM/SM order conf.: Determine cust. specific default values
    CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
    CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
    CONFPM04                                PM/SM order conf.: Customer specific input check 2
    CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
    use the exit which contains both structures AFPO,AUFM.

  • User exit for Production order confirmation during goodsmovement

    Hi Guru's
    Am in need to find the user exit for Equipment master creation. Equipmentmaster will be created when the goods movement 101 happens.  can someone help me out to find the user exits. thanks

    Hi,
    Ok thanks for that.For Co11n please find the user exits below.But i am not sure which will suit your requirment.Please let me know for any further help.
    CONF0001  Enhancements in order confirmation
    CONFPI01  Process order conf.: Calculate cust.specific default va
    CONFPI02  Process order confirmation: Customer spec. input checks
    CONFPI03  Process order conf.: Cust. spec. check after op. select
    CONFPI04  Process order conf.: Customer specific input checks 2
    CONFPI05  Process order conf.: Cust. spec. enhancements when savi
    CONFPI06  Process order confirmation: Actual data transfer
    CONFPM01  PM/SM order conf.: Determine cust. specific default val
    CONFPM02  PM/SM order confirmation: Customer specific input check
    CONFPM03  PM/SM order conf.: Cust. spec. check after op. selectio
    CONFPM04  PM/SM order conf.: Customer specific input check 2
    CONFPM05  PM/SM order conf.: Cust. specific enhancements when sav
    CONFPP01  PP order conf.: Determine customer specific default val
    CONFPP02  PP order conf.: Customer specific input checks 1
    CONFPP03  PP order conf.: Cust. specific check after op. selectio
    CONFPP04  PP order conf.: Customer specific input checks 2
    CONFPP05  PP order conf.: Customer specific enhancements when sav
    CONFPP06  PP Order Confirmations: Actual Data Transfer
    CONFPP07  Single Screen Entry: Inclusion of User-Defined Subscree
    CONFPS01  PS confirmation: Determine customer specific default va
    CONFPS02  PS confirmation: Customer specific input checks 1
    CONFPS03  PS confirmation: Customer specific check after op. sele
    CONFPS04  PS confirmation: Customer specific input checks 2
    CONFPS05  PS confirmation: Customer specific enhancements when sa
    Thanks,

  • GATP - User exit during product availability check

    Hi,
    Is there any method (e.g. user exit)  to confirm the stock based on batch characteristic in APO during product availability check? i.e. before confirmation of the stock some validation needs to be put by reading the batch characteristics.
    Let me know if further clarification is required.
    Regards,
    RS

    Hi Manimaran,
    thanks for the reply,
    Actually we are not using class 400. The confirmation of stock should be done by reading the batch characteristic value because we want to put validation on the characteristic value. This should happen during product availability check.
    Is this possible based on batch class (023) and without using class 400.
    Regards,
    RS

  • User exit for production order settlement

    Hi Experts,
    Can anybody tell me if there is any user exit which will make GR and settlement of Production Orders at the same time i. e. as soon as production order is confirmed ( movement type 101 happens) the same production order will be settlelled immediately.............
    Thanks on advance for your answer.
    Regards,
    Bijay

    Hi,
    for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
    But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
    Also BADI WORKORDER_UPDATE could be interessting for you.
    Regards,
    Sabine

  • User exits for production order

    Hello,
    Hope all had good weekend. I need some help and would appreciate if someone can guide me here.
    I have a requirement where I need to develop an enhancement point for production orders transaction CO02.
    The enhancement will check the user's authorization profile. Based on authorization profile, enhancement point will decide and direct 'CO02-Change production Order' OR 'ZCO02 - restricted production orders'.
    Here are few question I have related.
    1. What user exit I should use for this above requirement ? This should be triggered whenever CO02 is being called either from SAP easy access menu or from a different transaction.
    2. How can I check/read users authorization profile within this user exit/enhancement point ?
    3. Based on the profile, how do I direct to CO02 or ZCO02 ?
    Will highly appreciate if someone could please share their knowledge on this.
    Thanks,
    JMC

    Hi J,
    can u tell me whats there in ZCO02 - restricted production orders', have u seen SHD0 -->creating screen/transaction variants ?
    Disabling tabs in SHD0
    Regards
    Prabhu

  • User Exit at Production Order Release

    Hello Everyone
    Could anyone tell me if there is any particular User Exit at the Release of Production Order? I have seen the list but didnt find any appropriate one.
    Reward points Guaranteed
    Regards
    Chandra

    Hello,
    Another workaround could be to create a user status 'released' (REL) that is set at 'order release' and removed at ' reread master data' is done (just like the system status REL).
    Attach the ABAP code to the activation of the user exit.
    Other advantage is that you have another field to select in COOIS(PI). We have created user statusses in order to replicate all primary system statuses (CRTD, REL, TECO, CLSD) in order to facilitate reporting. Via this way we have a column with only one status for filtering, sorting summarizing...
    Regards,
    Philip

  • User Exit - EXIT_SAPLKEAK_001 - Product Hierarchy field

    Dear All,
            I am trying to control the input of the Product Hierarchy in the t-code F-02 - Profitability Segment section. So far i found the user exits - EXIT_SAPLKEAK_001 is related to control the data in the profitability segment in t-code F-02. However, i cant find the product hierarchy field be store in this exits while i debugging this program.
    Please kindly advise .
    thank you very much

    Hi,
    Actually I dont want selection from any view. I want to create search help exit for this custom field. And it should be similar to.. PRODH field. In PRODH the data is coming when we press F4 from T179 table. So in place of T179 the data should come from my custom table.
    This is what my requirement is.. Hope u understand now.
    Thanks,
    Jhings

  • User exit for TO Confirmation

    Hi,
    I want to Raise error message for Transfer order confirmation when destination Storage type is 998(no location)?
    Regards,
    Omkaram.

    User Exits for Transfer Order.
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task)
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)

  • User Exit  during TO confirmation

    hello,
    I need to find a user exit that we can use during TO confirmation..need to capture some information from the TO , such as source , destination bins , quantity and user ....plz advise
    Kind Regards
    Edited by: BrightSide on May 18, 2009 9:29 AM

    Hi,
    In transaction CMOD you have to create a new proyect and assign the enhancement MWMTO002. There are only one user exit (EXIT_SAPLL03T_002).
    You have to create the include ZXLTOU02. In this include you can put a break pint to check the user exit (the user run in update task, so you need to activate the update debuggin).
    In the user, you have the structure I_LTAK_VB with the header data of the TO that you are confirming and the table T_LTAP_VB. This table is filed with all positions that you are confirmed (if you confirm the TO, all positions is filled in the table, if you confirm only one position, only this appear in the table).
    Regars,
    Pepe

  • Required User Exit for production order once it is created

    Hi,
    Once Production order is created, We are running a Z transaction manually to send the production order to external server (Right Hemisphere) .
    Requirment is, when a Production order is created, the production order should automaticallly send to external server
    (Right Hemisphere) using Z transaction. 
    Is there any User Exit to above requirement. Please let me know.
    Thanks & Regards
      Satish Reddy

    Hi
    Use this to check the Userexits for the transaction.
    See which among them matches your requirement.
    [http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/userexits%20in%20a%20transaction.doc]
    Regards
    Raj

  • User Exit For production Order Information System

    Dear All,
    I am looking for an User Exit,BADi's for production order Information System where i can see the Quantity which is already produced & The Quantity which is already passed from Quality.I mean the GR Quantity against the Production Order and against that Quantity how much is passed from the Quality.
    This is an Urgent Requirement from The Customer.
    Please Help.
    Thanks
    Sujay Joshi

    Dear
    You use QA33 report with following fields,,,,here you will get all required
    Inspection lot     
    Material     
    Plant     
    Insp. lot quantity     
    Base unit of measure     
    System status     
    Order     
    Unrestrictd-use stck     
    Scrap quantity     
    Sample     
    Blocked stock     
    Reserves     
    New material     
    MatTransfer posting     
    Posted to batch     
    Return to vendor     
    Other quantity     
    Other quantity 2     
    Quantity to be posted     
    Long-term sample qty     
    Inspected quantity     
    Destroyed quantity     
    Actual lot quantity     
    Defect. qty in IQty

  • User exit for Production Order release

    Hi Experts,
    Any User eixt for Prouction Order Mass processing.
    Before releasing the production order i have to do some checks. Can you please provide right user exit. More reward points with best solutions.
    Thanks
    Cris

    Hi,
              check the following userexits and BADI's for Production Order
    Enhancement/ Business Add-in Description
    Enhancement
    PPCO0010 Enhancement in make-to-order production - Unit of measure
    PPCO0012 Production Order: Display/Change Order Header Data
    PPCO0013 Change priorities of selection crit. for batch determinati
    PPCO0015 Additional check for document links from BOMs
    PPCO0016 Additional check for document links from master data
    PPCO0017 Additional check for online processing of document links
    PPCO0018 Check for changes to production order header
    PPCO0019 Checks for changes to order operations
    PPCO0021 Release Control for Automatic Batch Determination
    PPCO0022 Determination of Production Memo
    PPCO0023 Checks Changes to Order Components
    STATTEXT Modification exit for formatting status text lines
    PPCO0009 Enhancement in goods movements for prod. process order
    CCOWB001 Customer exit for modifying menu entries
    COIB0001 Customer Exit for As-Built Assignment Tool
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    PPCO0001 Application development: PP orders
    PPCO0002 Check exit for setting delete mark / deletion indicator
    PPCO0003 Check exit for order changes from sales order
    PPCO0004 Sort and processing exit: Mass processing orders
    PPCO0005 Storage location/backflushing when order is created
    PPCO0006 Enhancement to specify defaults for fields in order header
    PPCO0007 Exit when saving production order
    PPCO0008 Enhancement in the adding and changing of components
    Business Add-in
    AFABD_CHANGE Change Relationship
    CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection
    PPPI_SEL_ORD_EXT_REL
    SIDAT_UPDATE Change date of price simulation
    Regards

Maybe you are looking for

  • How can i include css in html file when exported

    I want the CSS should be included in the html file when exported, how is that posable?

  • ESOA :create RFC detination to es workspace HU2

    I want to create RFC detination to es workspace HU2, I set the router string.error like this.(NWA->Configuration Management>destinations). Error during ping operation: Connect to SAP gateway failed Connect_PM  TYPE=A ASHOST=iwdf1030.dmzwdf.sap.corp S

  • Gateway error in sun ONE portal gateway when invoking a Lotus notes channel

    Hi Friends, I have configured a channel in the portal server for integrating it with the lotus notes server. I have to edit the following options in the channel. servername: <name> portnumber: 80 username: <username> userpassword: <password> This con

  • Crystal Report hyperlink to a usertable

    Hi all, i create a Crystal Report and now i need to add some hyperlink. I add the first to the warehouse object and all woek good. Now i need to create an hyperlink that point to a user table but it not work. Somebody knows if it is possible to do th

  • Nokia E63 short cut correction:

    Hello, I was trying to find a "shortcut" for going right to my bookmarks on a Nokia E63 and I found this (but it needs one correction...at least on my phone with firmware v100.21.110: Shortcut keys for web browsing You can use keyboard shortcut keys