User-exit in va01(real time problem)

Hi Experts,
suppose that while creating a sales order i have 4 material in it.
now what i want that if the price(kbetr) of any material is below 50 then it should give a error message that 'price for this material is below 50' and that sales order can't be created.but if we delete that material from the sales order or there is no material whose value is less then 50 then we can save it.
Please help me on this issue.which user-exit should i use for it.
it give be much better if any one1 can provide me the code do it plus the name of the user-exit.
please help me out its very urgent.
necessary points will be awarded,
Thanxs In Advance,

i m trying to check the price for some conditions for every material. if any of the price is less then 50 Rs the it should gimme an error message that the SO can't be created.
i am writing code in this user-exit
FORM USEREXIT_SAVE_DOCUMENT_PREPARE
and the code is
data val type i.
SELECT KNUMH FROM A501 INTO WA_ITEM-KNUMH WHERE MATNR = VBAP-MATNR
                                                   AND   WERKS = VBAP-WERKS
                                                   and kschl = 'ZCPR'
                                                   and AUART_SD = vbak-AUART
                                                   and kunwe = vbak-kunnr.
       SELECT SINGLE kschl KBETR FROM KONp INTO (kschl ,KBETR ) WHERE KNUMH = WA_ITEM-KNUMH.
val = kbetr / 100.
CASE KSCHL.
    WHEN 'ZCPR'.
    if ( val >= 50 ).
      message 'sales order created' type 'S'.
    else.
    message 'sales order cant be created' type 'E'.
      endif.
    ENDCASE.
            ENDSELECT.
but this is only checking for the last material only.
what change should i make that it will check all material in the sales order instead of the last one

Similar Messages

Doing user exit for va01

Hi,
I got a problem in the user-exit of VA01. when we are copying data from request with quotation then the items all are copied and in edit mode.
but in the item list we have to get item category in display mode how to make display mode of the table control. i know the logic to make table control field to display in general. but i dont in userexit how to call screen and all can any one know of the userexit for the screen and i have to configure this user-exit in spro "opy control routine".

You would have to test, but I think you can do it with user exit MV45AFZZ.
In the form USEREXIT_FIELD_MODIFICATION, you could add something like...
if sy-tcode = 'VA01' and      " order create
   vbak-vgtyp = 'B'.           " quotation preceding
if screen-name = 'VBAP-PSTYV'.
    screen-input = 0.
endif.
endif.
You might also want to check <b>if not vbak-vgbel is initial</b>. I believe this is the reference document.

Hi , any body can send real time problems they faced

hi every body this is siva from banglore, any body can send the real time problems they faced in sap crm and how they solved if any body kindly send to my id : [email protected]

hi Siva,
All the issues in the forums are the real time issues
YOu can just go through them .
Also why do you need real time issues.
If you have any issues post it here and some one can help you

What is the user exit triggering at this time of saving delivery document

Hi All,
What is the user exit triggering at this time of saving delivery document
regards
Deekshitha.

For the Delivery process following project are used, you can list out all exit
V02V0001
V02V0002
V02V0003
V02V0004
V50PSTAT
V50Q0001
V50R0001
V50R0002
V50R0004
V50S0001
V53C0001
V53C0002
V53W0001
VMDE0001
VMDE0002
VMDE0003
VMDE0004

User-exit in VA01/VA02 to add order item and condition price

Hi experts,
   I have an urgent requirement to add an order item and pricing for VA01/VA02 when certain logic are met. Do you know a user-exit in VA01/VA02 to add sales order item and condition price for an order?
I am currently using user-exit USEREXIT_SAVE_DOCUMENT_PREPARE but I can only add the required order item to xvbap but I also need to add a condition code and condition price for the added item (in xkomv). Your response are very much appreciated.
Thanks in advance!

Hi Leo,
Check out few more exits:
Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001            Activating Sourcing Subitem Quantity Propagation
Reward points if this helps.
Manish

User exit in VA01 for changing the status profile

Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
Santosh

Hi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
    OBJNR                          = XVBAK-OBJNR
    STSMA                          = G_STATUS
NO_CHECK                       =
EXCEPTIONS
   OBJECT_NOT_FOUND               = 1
   NO_STSMA_CHANGE_POSSIBLE       = 2
   STSMA_NOT_FOUND                = 3
   OTHERS                         = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u.

User exit for va01 pricing

Hi experts,
while preparing order in va01 user wronly enter value for zvat in condition , for eg : zvat is 12% but user given 4.5% and save order, i won t allow to save this type of order. kindly give any solution for this.
Regards
G.Vendhan

hi
you can have a look at all the user exits available on this thread
Re: User Exit for va01
hope it helps
regards
Aakash Banga

User exit for va01 (schedule line )

hi all,
Pls tell me how to use user exit in va01.when user add material and select schedule line for that material he has to add CP/CN .but when user put CP it will give message that CN is default pls enter CN.like these msg i have to give.pls give me solution.
Thanks,
Nitin

Hi Nitin
     Try userexit_move_field_to_vbep in MV45AFZZ
         or userexit_check_vbep in MV45ZAFZB.
       check vbep-ettyp for the schedule line category and write the logic.
Kuntal

User exit for va01 on save event

Hi
Can you tell me with user exit is there for save event in VA01.
cheers
AJ

Hi,
USER EXITS for VA01
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Regards,
Prashant

User Exit for VA01 - Delivery Block

Dear Friends
I wanted to do a User Exit for VA01 which should set the Delivery Block = Credit Memo as default for a particular user.
Can anyone give me the solution.
REg
S.K.Raj

Hi Kamaraj,
First of all u have to find out the perticular exit for make the changes, after that take one field TBTKZ which is flag for decit /credit memo. Based on the condition that flag set as 'X'. If that flag set as 'X' then populate the data.
Here it ishow to find out the user exit.
execute the following report and enter the t-code VA01 it will display all the exits. then search them by seeing coments..
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
Hope this helps you..
Regards,
Kumar.

User Exit for Va01[ Return Order ]

I Have Written User Exit for Va01[ Return Order ] in MV45AFZZ,
I'm Making tax field VBAK-TAXK1 as 0 when making this field as 0 Pricing Condition Tax calculation should not be exit and tax value must be 0.
How to do this process...plz give me a solution.

Hi
For price calculations or modifications, you may have to write the code in SD routines. Check this T.code VOFM.
Reward if it helps!
Krishna

Bex Query: make data pass through user exit calculation at navigation time

Hi all!
I have a new requirement and I don't know how to solve it...
Now, when I execute a web model containing a query, the system "reads" a date and calculate the query based on that date in a user exit defined in CMOD, for example, filtering data with an interval between january and the date read.
Besides, I have in the web model a dropdown item where user can choose other months. The dropdown item only shows single values but now if I choose a month, the query only shows data for that month.
I need the system filters the query with the new interval. For example, between january and the new month the user has just chosen.
Does anyone know a way to make a query pass through the user exit calculation after executing the query for the first time? Any other ideas? I need the query to "reexecute" and filter the data (create a new interval) based on the value a user chose.
(sorry about any inconvenience, because I posted the problem in another sdn specific forum but as I received no answer I've decide to explain it in here...)
Thank you! Points will be assigned.

Any ideas please?

User exit for va01/va02 for std program

Hi ,
how are u all....
here is my problem...
i created a customized screen for va01.
this screen gets called after user saves the order.
in this screen i provided 4 options .
1. accept the order
2 change the order
3.reject the order
4 release unconfirmed.
i am calling this screen in user exit userexit_refresh_document.
before this am capturing the order number .
once user clicks on first radion button i.e on accept.
then i am passing the order number and removing the block using BAPI_salesorder_change.
but here bapi is passing the error message as plese enter the order number ....
my doubt is the userexit whr am calling the screen is correct ?
can we do the same using BDC ..?
if anybody working actions on user entry for va01 and va02..
please let me know whr and how u r writing the code... sooon
thx in advance...
regards
sanjay

what are u doing ? , u cannt call BAPI in the same user exit.
if user accepts the order --->then u have to unblock the order ?
then u have to activate Credit Control User exits ->SPRO->SD->System Modifications>Credit Control User exits.
regards
Peram

User exits for VA01

Hi Experts,
For transaction VA01, is it possible to know list of user-exits available.
Thank you

Hi Peter,
You can have the User Exits for sales order processing not for the VA01 transaction.
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
I hope it will help you,
Regards,
Murali.

User exit of va01

need help in user exit coding i.e. the requirement is like this.
Exit is V09A0004.
After entering the sold to party in VA01,one pop up comes when we press enter.
In that pop up we can see SH,BP,PY.From that if we select SH and that SH having account group 'zjst' then that default values of BP, PY should be override with that SH partner selected.
And also user not be able to enter any values in that BP,PY after overriding.
do we need to modify userexit_save_document_prepare .If how can we do that whole thing.
Pls help me in this.
Thanks.

need help in user exit coding i.e. the requirement is like this.
Exit is V09A0004.
After entering the sold to party in VA01,one pop up comes when we press enter.
In that pop up we can see SH,BP,PY.From that if we select SH and that SH having account group 'zjst' then that default values of BP, PY should be override with that SH partner selected.
And also user not be able to enter any values in that BP,PY after overriding.
do we need to modify userexit_save_document_prepare .If how can we do that whole thing.
Pls help me in this.
Thanks.

User-exit in va01(real time problem)

Similar Messages

Maybe you are looking for