User exit in vd01.

Dear all,
in vd01 i am using the userexit sapmf02d.i had activated the userexit and i had kept the break point.even though the control is not passing when i am executing the vd01 tcode.can u pls... help me in this to get the control over there.
-Regards,
HSREDDY

Hi,
can check whether break point is there in any condition . IF condition fails break point will not trigger so check in debugging any condition
Mahendra

Similar Messages

User exit for VD01 - Create Customer

I am finding user exit for VD01 - Create Customer.
I need a newly created Customer number - KNA1-KUNNR.
I found user exit EXIT_SAPMF02D_001, but if field Customer left blank on screen in VD01, the parameter I_KNA1-KUNNR is blank. Because program genereates KUNNR further.
Edited by: S S on Dec 23, 2008 7:56 AM

Dear SS,
What I understood is system is generating internal number range for customer in your case.
You want to know the number of customer number.
I think with this exit EXIT_SAPMF02D_001 you don't get customer number.
Try with this BADI CUSTOMER_ADD_DATA
Method MODIFY_ACCOUNT_NUMBER. use break point here.
Then create a customer in VD01 (internal number range). maintain necessary information and save.
system will take you to debugging mode. here you can see internal number of customer.
Regards,
Chandra

Regarding User Exit for VD01

Hi All,
I need to do some special validations based on the partner funstion which is entered during the customer creation through the transaction VD01.
May i know which user exit can be used for the above or any badi can be used
Thanks.

Hi,
User sxit for VD01 SAPMF02D User exits: Customer master data
Regards,
Prashant

Screen Exit for VD01 / VD02 / VD03

Hi, I would like to add a custom field to VD01 / VD02 / VD03 - Control Data Tab - Tax Information subscreen. May I know is there any screen exit that I can use to add the custom field? If yes, can you please let me know? Else, what is the other way that I can use to achieve this? Thanks.
Thanks, Nick. G

Pls check this out -
Transaction Code - VD01                     Create Customer (Sales)
Exit Name           Description
SAPMF02D            User exits: Customer master data

User exit or BADI in XD01 transaction

Hi friends,
I Have a requiremnt.
when ever my Xd01 or vd01 transaction is executed. i need a user exit where i can check for a particular account group ABC if the account group is ABC then i need to add that particular customer number to ztable.
can any one tell the badi or user exit name
similar to user_exit_save_document in va01 transaction , in the same way i need a user exit or badi in xd01.
Regards
Priyanka

Hi,
user exit for XD01 transaction code is
SAPMF02D   -
>    User exits: Customer master data
and the function module is
EXIT_SAPMF02D_001 ---> Customers: User Exit for Checks prior to Saving
Badis for XD01
CUSTOMER_ADDRSCR_CHG Implementation of CUSTOMER_ADDRSCR_CHG by Public Sector
CUSTOMER_ADD_DATA    Implementation of CUSTOMER_ADD_DATA by Empty
CUSTOMER_ADD_DATA    DSD Implementation of CUSTOMER_ADD_DATA
CUSTOMER_ADD_DATA    /NFM/ Screen in Customer Master
CUSTOMER_ADD_DATA    ETM implementation
CUSTOMER_ADD_DATA    US Federal Government Customer Master Extension
CUSTOMER_ADD_DATA    Implementation of CUSTOMER_ADD_DATA by Public Sector
CUSTOMER_ADD_DATA    IS-Oil-Erweiterungen von Kundenstammdaten
CUSTOMER_ADD_DATA    IS-Oil Downstream Customer
CUSTOMER_ADD_DATA    sfsdfsd
CUSTOMER_ADD_DATA    test implementation for field
CUSTOMER_ADD_DATA    zCUSTOMER_ADD_DATA
CUSTOMER_ADD_DATA    g
CUSTOMER_ADD_DATA    customer_test
CUSTOMER_ADD_DATA    test custom
CUSTOMER_ADD_DATA    testing for custom screen
CUSTOMER_ADD_DATA    testing
CUSTOMER_ADD_DATA    Customer enhancement
CUSTOMER_ADD_DATA    testing
CUSTOMER_ADD_DATA    testing
CUSTOMER_ADD_DATA    testing
CUSTOMER_ADD_DATA_BI ETM Implementation
CUSTOMER_ADD_DATA_BI IS-PS: Additional Data for Customers (Batch-Input and ALE
CUSTOMER_ADD_DATA_BI IS-OIl customer master fields Batch Input/ALE
CUSTOMER_ADD_DATA_CS Implementation of CUSTOMER_ADD_DATA_CS by Empty
CUSTOMER_ADD_DATA_CS DSD Implementation of CUSTOMER_ADD_DATA_CS
CUSTOMER_ADD_DATA_CS Impl. of CUSTOMER_ADD_DATA_CS by DSD, Sales Area Data
CUSTOMER_ADD_DATA_CS /NFM/CUSTOMER_DATA
CUSTOMER_ADD_DATA_CS ETM Implementation
CUSTOMER_ADD_DATA_CS US Fed Gov't Customer Master Data Extensions
CUSTOMER_ADD_DATA_CS Implementation of CUSTOMER_ADD_DATA_CS by Public Sector
CUSTOMER_ADD_DATA_CS IS-Oil Downstream Screens
Regards,
Madhu

User exit upon saving the customer

Hi
can any one tell me what user exit is triggered upon saving the customer in XD01,XD02,VD01 & VD02 Tcodes.
Thanks
Sonali

Hi sonali
Check these user exits which are used at partner determination level. May be this inputs will help you
EXIT_SAPLV09A_001
You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address should be created (duplicated).
EXIT_SAPLV09A_002
Call up this user exit if a customer has not been maintained in the current sales area.
EXIT_SAPLV09A_003
Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
EXIT_SAPLV09A_004
Use this user exit to integrate your own check in a program that runs before the partner is saved in the document.
For more detailed information, see the program documentation for each of the user exits
Regards
Srinath

User exit ZXPADU02 - evaluating SY-UCOMM

Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
        WHEN '0007'.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = INNNN
        IMPORTING PNNNN = P0007.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = PSAVE
        IMPORTING PNNNN = P0007_ALT.
      IF P0007_ALT-SCHKZ <> P0007-SCHKZ
      AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
      AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
        MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
        SHOW_DATA_AGAIN = 'X'.
      ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.

Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
      ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt.

Using a variable not in the Export,Import, table Parameters in USER EXIT

Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
Asha

Hi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti....

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

Free Goods Problem and User Exit if needed in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka Mitra

Hello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks.

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

BADI/user exit for transcation code "BP" in CRM

Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

User exit in vd01.

Similar Messages

Maybe you are looking for