User Exit M06B0001 for Purchase Requisition Releases WF

Hi All,
I'm having some trouble with the User Exit M06B0001. I am trying to add logic in here to determine the correct agents based on release codes, cost centers etc. and send emails to the required agents.
Some background info: we are using BUS2105 (for overall release), with a custom WF based on the standard WS20000077, all the release strategies are configured..
My understanding was that when a PR is created and saved, the RELEASESTEPCREATED (this is what i configured in SWE2) event is kicked off and my WF is started, which all works fine. I thought it was at this point that the user exit M06B0001 was initiated.
But, what's happening is that if a user creates the PR and hits the "check" button (before hitting save), it hits the Exit several times...I thought it would only hit the exit once the WF was kicked off. Right now, it's hitting the Exit twice for each level of release, for example if a PR has level's 10,20,30, in the Exit (via Debug) the i_frgco shows 10,20, 30 and then again 10,20,30...so it goes in there 6 times (I get 6 emails from myself)! Once the user saves...it again hits the Exit, but without hitting my breakpoint (I know it's going in there because I get a 7th email..this time from the Wf-batch user)- this is the correct thing that is supposed to happen.
I would appreciate it if someone could explain this User exit to me and how it is supposed to work.
Thanks,
Suman

Hi:
Since it calls in include so it not necessary that exit signature you'll get.
You have 2 ways to find it out
1. go in se37 and put EXIT_SAPLMEREQ_006, select where used list - it would go in include -> again select include -> click on where used list -> it would give the calling position- just check the required data
2. Put the break point at the calling postion and check its parameters
Regards
Shashi

Similar Messages

User exit/BADI for Purchase requisition through release of Process order

Hi ,
i need to add some text to the Pur Req.
The Pur Req will be created THROUGH the release of PROCESS order. Please let me know any exits are available for the same.
regards

Hi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MM06E011                                Activate PReq Block
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0003                                Number range and document number
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED                      Purchasing Document Posted
SMOD_MRFLB001                           Control Items for Contract Release Order
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
Reward points if useful
Regards
Anji

USer Exit/BADI for Purchase requisition creation in MDBT or WC27 /MRP Run

I am looking for an enhancement where a purchase req is created during MRP Run in the background ( MDBT or WC27 or program - RMMRP000 .
Any suggestions would be welcome.

Hi,
try the exits:
LMDR2001 User exits restr. profiles of opt. pur.ord.
LMDZU001 User exits in additional planning
Regards,
Renjith Michael.

User Exit/BADI for Purchase Order and Purchase Requisitions

HI,
I have a requireent where i have to check the the user does not enter both Subitems and Over a Limit for a Service Purchase Requisition.
Is there a User Exit or Badi that i can use where this information is availaible.
also i have to check that release strategy is assigned to every purchase order where the version has been completed.
Is there a User Exit or Badi where Information of EREV table is availaible.
Regards,
Tarun Bahal

For Purchachase requisition , the BADIs and USER EXITS are
ME_COMMITMNT_PARKING BAdI for Redefining Commitment Interface When Parking
ME_MEREQ_PARKING BAdI Purchase Requisition: "Hold"
ME_REQ_HEADER_TEXT Copy Header Text: Enjoy Purchase Requisition
try with the above BADI's
MEREQ001 Customers' Own Data in Purchase Requisition
for Purchase order , the BADIs and USER EXITS are
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_BAPI_PO_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PR_CREATE_02
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_COMMITMENT_RETURN Commitment for return item
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
SMOD_MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
Regards,
Anirban

Workflow for purchase requisition release strategy

Hi all,
I need an urgent help on Workflow for Purchase Requisition Release. The requirement is that when a purchase requisition with a given combination (Purchasing Group, Material Group and Account Assignment Category) is created and saved, it should trigger a workflow for approval of release or rejection to one specific business manager. If he dont responds in 2 days, it should be sent to other business manager. If any one of them releases the requisition, it should send a mail to the requestor that the requisition is released. And if it is rejected, then also a mail to be sent to the requester informing that his requisition is rejected...
Can anyone take some pain and guide me step by step procedure to implement this or to use any existing one.... I know its BUS2009 thats used in this but really dont know how to implement it properly.
Its urgent...
Edited by: Hima on Apr 11, 2008 12:45 PM

Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/04/92762546f311d189470000e829fbbd/frameset.htm
Thanks
Arghadip

Badi for Purchase Requisition Release Strategy

Can any help me to know about the BADI for Purchase Requisition Release Strategy .Is their any BADI to control the PO Price for a PR release strategy
Thanks for your help

This badi is for schedule agreement ?
BAdI: Release Creation for Scheduling Agreements with Release Documentation
Use
You can use this Business Add-In (BAdI) to influence release creation.
This BAdI is used in the application component Scheduling Agreements (MM-PUR-OA-SCH).
This BAdI includes the following methods:
Change Data Before Release Creation (BEFORE_CREATION)
Change Data After Release Creation (AFTER_CREATION)
This BAdI is called during manual and automatic release creation.

User Exit MIGO for Purchase Orders

I need to check a purchase order during the Migo process.
I tried the User Exit EXIT_SAPLEINR_001, but the break-point has no effect. The user- exit is useful for schedule agrmts but it seems that there is a different handling.
Do you have an idea where I can check the MIGO date?

hi alexander,
this program will display all the user exits available for any specified Tcode.
when u execute this code...... it will ask for tcode..... u enter any tcode.... it will display all available exits for specified tcode.....
i hope this may help u...... all the best....
report y_user_exit .
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
reward me if it is useful..............
with regards.....

User Exit when save Purchase Requisition (ME51N and ME52N)

Hy Everyboby,
I want to know an enhancement point/user exit activated when saving a Purchase requisition to control all item amount for a budget check.
So anyone can help me ?
Thanks in advance.

Hi All,
i am working on an enhancement where in i need to enhance the transactions ME41,42 , ME51n, 52n and ME21n and ME22n.
the requirement is whenever a PR is created/modified (ME51/52) and a business document is attached to it, then the same business document should be available in the RFQ created for this PR as an attachment. and the same flow should happen while creating the PO using the RFQ. I am unable to find a correct user exit for this requirement. kindlyreply me if you have any solutions for it.
your help is very much appreciated.
thanks,
Mohan

User Exit/BAdI for transaction ME22N - Release status of PO

Dear All,
Requirement: Irrespective of any change to a PO having its release indicator set to approved, the release indicator must not get updated.
As of now, editing a PO (using ME22N) leads to the updation of release group, release strategy and release indicator - this should be prevented from happening for all POs that have a release indicator set to Approved.
We know that in the system, this is determined in the FM ME_REL_STRATEGIE_EKKO. However we are using the version 4.6C and not being able to find a suitable user exit or other enhancement option. Can someone help us with a way to prevent this change from happening.
Regards,
Nimish

Hi,
Did you check the BAdi: ME_PROCESS_PO_CUST.
Reddy

User-Exit message for Purchase Order

Hello,
I've implemented a specific type of message (ZNEU) for purchase order.
With some specifics conditions (not managed in SPRO), I'd like that the ouput message of a purchase order is either the standard one NEU or my specific ZNEU..but noth both as actually.
Is there any user-exit where I can code and change the ouput message determination ?
Thanks a lot in advance.
Best regards
Fanny PONEL ( GROUX).

No user exit for this but this can be control by MN04.
Here you can control the ouyput type trigger
youmay need to configure the access seq and maintian that for your ZNEU conditon.

User exit to change Purchase requisition created from VA01

Hi,
I am using item categories ZRUI and ZRUD for which PR is created in VA01 while saving the sales order.
I need to change address data in such PR. Can anyone suggest user exit to be used??

Hi,
You may use USEREXIT_MOVE_FIELD_TO_ME_REQ.
You can find this in include MV45AFZB.
<REMOVED BY MODERATOR>
Regards,
Sharad
Edited by: Alvaro Tejada Galindo on Jul 21, 2008 12:37 PM

User Exit for Purchase Order Release Strategy

Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
Mick

Hi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren

Can anyone give me user exit name for create/update purchase order partners

Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.

hi,
check these exits.
Transaction Code - ME21N                    Create Purchase Order
Enhancement/ Business Add-in            Description
Enhancement
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number

User exit/BADI for Return PO item delivery Address

Hi Guyz,
We have a requirement where in when a PO item is marked as return PO item(In ME21n/ME22n/ME23n We have check box at item level) and click on enter/Check/Save, In delivery address of item details we have to populate Vendor address. By default SAP populates Plant address. If we manually give Vendor number in item details=>Delivery address tab then it populates vendor address. We want to automate this functionality.
Is there any Exit/BADI which serve this purpose.
Note: We need this functionality for few doc types(i.e PO doc type should also be available in the exit).
Any ideas could be really helpfull.
Thanks,
Vinod.

Hi,
there are some user-exit & enhancements....
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number
Some BADI s:
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001                           Control Items for Contract Release Order
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED                      Purchasing Document Posted
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
No.of Exits:         35
No.of BADis:         55
Arunima

I found a exit CIFPUR02 for purchase order inbound process.is it suitable?

I found a exit CIFPUR02 for purchase order inbound process.is it suitable?
my idoc is PORDCR102 AND message type is PORDCR1. my requirement is this is EXIT should trigger before saving the data in me21n.
Edited by: rk.kolisetty on Jun 24, 2010 4:59 PM

Hi,
Following are the user exit relevant to T Code ME21n.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
Rgd,
Chetan

User Exit M06B0001 for Purchase Requisition Releases WF

Similar Messages

Maybe you are looking for