User-Exit - MIGO How to get the Number of Material Document

Hi everyone!!
I'm looking for an user-exit after saving in MIGO transaction. I need the Number of Material Document (MKPF-MBLNR) to generate an IDOC.
Does anybody knows an user-exit to get this number?
Regards,
Rubens Kumori
Edited by: Rubens Kumori on Oct 20, 2008 3:26 PM

In BADI definition [MB_DOCUMENT_BADI|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mb_document_badi&adv=false&sortby=cm_rnd_rankvalue], you may use interfaces [MB_DOCUMENT_BEFORE_UPDATE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mb_document_badiMB_DOCUMENT_BEFORE_UPDATE&adv=false&sortby=cm_rnd_rankvalue] (before update task) and [MB_DOCUMENT_UPDATE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mb_document_badiMB_DOCUMENT_UPDATE&adv=false&sortby=cm_rnd_rankvalue] (in update task)
Regards

Similar Messages

How to get the number of created document?

Hi all,
My first program in ABAP works very well. Thanks to all who helped me
I would like only one function to it.
The program read data from excel file and generates document using BDC.
I use this statement:
call transaction 'F-65' using bdcdatafile
I count the number of documents which have been generated or refeused because of error using the sy-subrc function.
if sy-subrc <> 0.
 counter for errors
else.
 counter for generated documents
endif.
Finally program displays these number on the last screen and the user knows if there everything is ok. For example this is a sample screen:
1. OK.
2. OK.
3. Error.
Number of imported documents (2)
Errors (1)
However, I would like to add one information to these screen. If the document is saved it gets its own number.
Is any possibility to get this number for displaying?
Maybe there is a function which returns this number.
I want to get the scren like this:
1. OK. Document No. 10000001
2. OK. Document No. 10000002
3. Error
Best regards
Arek

The document number should be being passed back via a message. You need to specifiy to return any messages in the messtab when calling the transaction.
DATA: MESSTAB type table of BDCMSGCOLL WITH HEADER LINE.
call transaction 'F-65' using bdcdatafile
 messages into messtab.
Messtab will have the messages after the call, you can then read this internal table and check for the success message, usually the document number is in the first variable field, MSGV1.
Regards,
Rich Heilman

Indesign CS3: How to get the number of the current layer?

Hallo!
How to get the number of the current layer in a page?
Thanks,
Alois Blaimer

InterfacePtr<ILayerList> layerList(documentUIDRef, UseDefaultIID()); int32 layerCount = layerList->GetCount(); To findout layer name use IDocumentLayer* documentLayer = layerList->QueryLayer(layerIndex); PMString layer=documentLayer->GetName();

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

How to get the number of files currently open?

hi,
does any one know how to get the number of files currently open in windows OS?
e.g. lets say .txt files...
any comment will be really appreciated.
thanks

Assuming that you don't want to actually do this from within Java code (which would obviously require native code), here's a utility that will give you a list of which file handles are opened by which processes (on Windows):
http://www.sysinternals.com/ntw2k/freeware/handle.shtml
- K

How to get the number of elements in DB

Could you tell me how to get the number of elements in DB??
My code to get the number is below, but I think it is not efficient
DB->cursor(DB, NULL, &cursorp, 0);
while ((ret = cursorp->c_get(cursorp, &key, &data, DB_NEXT)) == 0)
count++;
--------------------------------------------------------------------------------------------------------------

Hi,
The most efficient way to get a count from the database is using the DB->stat API (http://docs.oracle.com/cd/E17076_02/html/api_reference/C/dbstat.html)
The code will be something like:
        DB *dbp;
        DB_BTREE_STAT *statp;
        int ret;
        /* Print out the number of records in the database. */
        if ((ret = dbp->stat(dbp, NULL, &statp, 0)) != 0) {
                dbp->err(dbp, ret, "DB->stat");
                goto err1;
        printf("%s: database contains %lu records\n",
            progname, (u_long)statp->bt_ndata);
        free(statp);The code comes from the example included in the distribution at examples/c/ex_btrec.c
If the database isn't a btree, you should update to the appropriate statistics structure and field.
It's worth noting that retrieving the count is never a "cheap" operation. The count is not stored in the database - since doing so introduced a single point of contention that creates a bottle neck.
Regards,
Alex Gorrod
Oracle Berkeley DB

How to get the number of messages consumed by a MDB ??

Hi all,
How to get the number of messages consumed by a MDB displayed in OEM in a Java Application ???
DMS ??? what use DMS ???
tanks

ok.
Well using DMS is one way to get at these sorts of stats in a programmatic manner.
There's a Java API you can use, or you could call out to the Spy servlet to query the DMS stats in either text or XML form.
I don't have an MDB published so I can't show you specifiically, but here's the sort of query you can use to extract the data.
http://localhost:8888/dms0/Spy?format=raw&table=oc4j_ejb_stateless_bean&recurse=children
Which produces a table of the TEXT form:
<DMSDUMP version='9.0.4' timestamp='1163456821185 (Tue Nov 14 08:57:01 CST 2006)' id='8888' name='OC4J'>
<statistics>
/oc4j [type=n/a]
/oc4j/default [type=oc4j_ear]
/oc4j/default/EJBs [type=oc4j_ejb]
/oc4j/default/EJBs/jmsrouter_ejb [type=oc4j_ejb_pkg]
/oc4j/default/EJBs/jmsrouter_ejb/AdminMgrBean [type=oc4j_ejb_stateless_bean]
pooled.count: 11 ops
pooled.maxValue: 1 count
pooled.minValue: 0 count
pooled.value: 0 count
ready.count: 11 ops
ready.maxValue: 1 count
ready.minValue: 0 count
ready.value: 0 count
session-type.value: Stateless
transaction-type.value: Bean
/oc4j/default/EJBs/jmsrouter_ejb/EnqueuerBean [type=oc4j_ejb_stateless_bean]
pooled.count: 11 ops
pooled.maxValue: 0 count
pooled.minValue: 0 count
pooled.value: 0 count
ready.count: 11 ops
ready.maxValue: 0 count
ready.minValue: 0 count
ready.value: 0 count
session-type.value: Stateless
transaction-type.value: Bean
/oc4j/default/EJBs/jmsrouter_ejb/TimerHandlerBean [type=oc4j_ejb_stateless_bean]
pooled.count: 11 ops
pooled.maxValue: 0 count
pooled.minValue: 0 count
pooled.value: 0 count
ready.count: 11 ops
ready.maxValue: 0 count
ready.minValue: 0 count
ready.value: 0 count
session-type.value: Stateless
transaction-type.value: Bean
</statistics>
</DMSDUMP>
Or produces an XML document of the form:
http://localhost:8888/dms0/Spy?format=xml&table=oc4j_ejb_stateless_bean&recurse=children
You can use the Spy console to find the table that contains the details for MDB and then take it from there.
This is not what you specifically want to do, but it does provide a good overview of how DMS is used.
http://www.oracle.com/technology/pub/notes/technote_dms.html
-steve-

How to get the number of bytes at TCP port

Hi all,
How to get the number of bytes to read at the TCp port...as someone had suggested in some forum we do read the number of bytes first and then pass this...
but we get a problem when we have FF data in this...because then it sends 2 FF data...and cause of this we skip the last data...is there any solution for the same?

Hi
In LabVIEW you don't have the same property as in serail port.
You havn't "Byte at TCPIP port".
if you developp a protocol, one soltion, is to send the size to read.
Ingénieur d'Application / Développeur LabVIEW Certifié (CLD)
Application Engineer / LabVIEW Certified Developer (CLD)

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

How To get the number of request's for a single Composite Application

Hi can any body tell how to get the number requst's for a single composite application.
Thanks
Mani

Hi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay

[Win VC++ 6.0 ]How to get the number of files count in a folder using VC++ 6.0?

Hi all,
Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0?
Thanks in Advance.
Regards
myriaz

I'm a little confused by the question, but it sounds like you're asking how to count the number of files with a particular extension in a given directory? That's not really an AI SDK question, but it's a fairly easy one to find if you google it. If you're trying to use Illustrator to do it, AI doesn't have a general purpose file API. It has a few functions to do some things that Illustrator needs, but I don't think enumerating directories is one of them.

Want to reduce the number of material documents created during Confirmation

When confirming each phase on the process order, backflush of components happens and a material document is created .So if we have multiple phases, multiple material documents are created. This way we are having large number of material documents created for each process order .
We do not want a material document to created for each phase but rather create one document while confirming the last phase of the process order. How can we achieve this? Is there a configuration or a user exit that can be used?
Our goal is to reduce the number of material documents created.

IF you assigned all the component to final phase then You can get only one material document for all the component
or
Remove all the backflush setting and do the Picking in COIK, The system will Post all the 261 movement component in one document

How to get the number of the row added to tabular form by the AddRow()

using 4.0. User clicks an Add button which calls a javascript function that gets a couple page item values, inserts a row (addRow(), and updates columns in that newly inserted row with the values from the page items. This works fine if I hard code the row number (so it saves the page item values into the row I specify) but I don't know how to get the row number of the newly inserted row?
i.e html_GetElement('f12_0003').value = DocName; will set the element F12 at row 3 correctly, but I need to have the 0003 replaced with a variable that has its value set after addRow() but can't figure out how.

hi,
use the following code:
CALL METHOD OF gv_selection 'Information' = gv_curpage
    EXPORTING
    #1 = 3. " get current page number
CALL METHOD OF gv_selection 'TypeText'
    EXPORTING
    #1 = gv_curpage. "show current page number
CALL METHOD OF gv_selection 'TypeText'
    EXPORTING
    #1 = ' of '.
CLEAR gv_endpage.
CALL METHOD OF gv_selection 'Information' = gv_endpage
    EXPORTING
    #1 = 4. "get total page number
CALL METHOD OF gv_selection 'TypeText'
    EXPORTING
    #1 = gv_endpage. " show total page number
Edited by: VoonHan on Oct 13, 2009 7:35 AM

How to get the number of Item in Material Document?

Hi all.
I'm using the BAPI_GOODSMVT_CREATE, and want to get the Item number in Material Document of every entry in the internal table. How can I do that?
Thanks in advance.

Hi YiNing
You can use this code after calling BAPI.
      SELECT SINGLE mblnr
       INTO CORRESPONDING FIELDS OF wa_mkpf
       FROM mkpf
       WHERE mblnr = p_mblnr.
      IF sy-subrc EQ 0.
        EXIT.
      ELSE.
        CALL FUNCTION 'RZL_SLEEP'
          EXPORTING
            seconds        = 2
          EXCEPTIONS
            argument_error = 1
            OTHERS         = 2.
      ENDIF.
*Check material document number is in table MKPF
CHECK wa_mkpf-mblnr IS NOT INITIAL.
REFRESH : i_mseg[],i_ser03[],i_objk[]..
SELECT matnr charg vfdat erfmg erfme mblnr zeile
         INTO CORRESPONDING FIELDS OF TABLE i_mseg
         FROM mseg
         WHERE mblnr = wa_mkpf-mblnr.
Here you will get the item in material number (ZEILE).
Regards,
Mukesh Kumar

How to get the number of days in a month?

hi all
is there any way to get the number of days in a given month with a given year? for instance, if year is 2004 and the month is July or February, how can i get the number of days? thanks.

Gee, I don't know ... Maybe this:
Calendar cal = Calendar.newInstance();
cal.set(Calendar.YEAR, 2004);
cal.set(Calendar.MONTH, Calendar.FEBUARY);
System.out.println("max days in month: " + cal.getActualMaximum(Calendar.DAY_OF_MONTH));
Do you not bother reading what people have already posted? Read the API docs on the Calendar class.

User-Exit - MIGO How to get the Number of Material Document

Similar Messages

Maybe you are looking for