User Exit not getting Triggered in Quality Server

Hi,
In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
which is getting triggered in Development server.But when I moved it to Quality,
The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
and that in turn is assigned to Project, still the problem persists.
Can any one suggest me what could be the problem.
Regards,
Kiran B.

Kiran,
Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
<b><REMOVED BY MODERATOR></b>
Satish
Message was edited by:
        Alvaro Tejada Galindo

Similar Messages

  • User Exit not getting triggered

    Dear all,
    we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
    for this, i had done the following things:
    1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
    2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
    (User exit, project eveything).
    Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
    Can anyone please guide me where i might have gone wrong?
    Thank you,
    Regards,
    Lakshmi

    Hi,
    HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
    First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
    Reward is useful.
    Regards,
    Harsha

  • User-exit not getting triggered in VA32

    Hello Experts,
    Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
    Thanks.

    Hello Experts,
    Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
    Thanks

  • User exit not getting triggered while creating the vendor

    Hi all,
    I wanted to extend the idoc(crermas01) according to my reqiurement.
    But when I am trying to create a vendor using the IDOC cremas01 the user exit EXIT_SAPLKD01_001 is not getting triggered.
    Can anybody tell me the reason why it is happening so...........
    Thanks and regards,
    Vinil.

    Is your Idoc generated after the execution?
    Where is you break-point, it is inside EXIT_SAPLKD01_001. Please note FM EXIT_SAPLKD01_001 will not be called unless it is implemented using project (CMOD) and project is active.

  • User exit that gets triggered at the press of 'Enter' in IW42

    Hi,
    Is there any user exits that gets triggered at the press of Enter key in PM order confirmation IW42 transaction. Basically the requirement is to give a customized message at the order confirmation screen when the enter key is pressed.
    Regards,
    Prabaharan.G

    Hi,
    You may try the following enhancement points and exit respectively.
    CMFU0001        E            EXIT_SAPLCMFU_001
    CMFU0002        E            EXIT_SAPLCMFU_002
    Pls reward points if useful.
    Regards,
    Renjith Michael.
    Edited by: Renjith Michael on Jan 12, 2008 12:57 PM

  • IDOC - Function Exit not getting triggered

    I am doing an inbound IDOC for the message type WMMBXY and using basic type WMMBID02.
    This is for goods movement based on PO.
    I  am doing an enhancement in the includeof the function module exit EXIT_SAPLLMDE_002.
    This exit is supposed to get triggered for the message type WMMBXY.
    when i tested the idoc in we19 it is sucessfully getting posted. I want to check my code in EXIT_SAPLLMDE_002. I have set breakpoint and tested using we19. But this is not getting triggered. But the idoc is getting sucessfully posted but with a status message 56 An inbound partner profile could not be found( I am not sure if this has something to do with above problem).

    Did you attach your exit to a CMOD project and activated the same(CMOD transaction)?
    The error you see regarding the partner profiles is probably due to the non existance of a partner profile for your idoc type in we20 transaction.
    Maintain the inbound partner profile in we20 transacttion.

  • User exit which gets triggered when a line item is deleted in va02

    Hello all,
                   I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

    Hello,
    Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
    BR
    Sudhakar.

  • LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

    Hi All ,
    Enclosed file has network connectivity diagram.
    1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2. 
    2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
    3.DHCP is server is located at different location and is reachable over MPLS.
    Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
    But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
    So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2  and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
    As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
    Note : DHCP snooping is not configured on SW1 and SW2.
    Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

    Hi,
    as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
    I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
    Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
    Best regards,
    Milan

  • When the User Exit USEREXIT_PRICING_PREPARE_TKOMK  gets triggered?

    Hi All,
    Could you please let me know when the following user exit gets triggered?
    USEREXIT_PRICING_PREPARE_TKOMK
    Is it before the Pricing?
    or
    After the pricing?
    Is it like Pricing uses TKOMK structure for calculating the Pricing?? Please help me....
    Thanks,
    Babu Kilari

    Thanks for the replies..
    I would like to know when this gets triggered, because in the structure TKOMK, i tried to change the value of KALSM(Pricing procedure) and clicked on carry out new pricing.
    But, the new pricing is not updated with the updated pricing procedure.
    Please let me know if I am going wrong.
    Your inputs will be appreciated on this.
    Thanks,
    Babu Kilari

  • Not getting request in quality server

    hello Gurus ,
                           I created a sap script in developement server , and release it in
    quality server . I fergot request number and description . We have restore data from production server to developement server , now i am not getting released request list in developement .
                          I want to forward my request to production , please cooperate me .
                                                                                    Your Thanking
                                                                    Shrikant Ambulkar

    Thanks for your prompt reply , problem has been solved , i got that request number .
                                                                                    Regards
                                                                                    Shrikant Ambulkar

  • Events in USER objects type not getting triggered in PFCG

    Hi,
    We need to send some notifications to the concern person at the time of assiging roles to the user . There is an object type USER and has events like created,cloned, deleted, roles_changed. But these events not getting triggered.
    I need to trigger the workflow. How do we activate the events as the entry doesnot exits in SWE2 tooo . Is ther any other way?

    HI munish
    If the entry is not in swe2 Put the entry for the business object USER and use the receiver type as your workflow number.
    Regards
    vijay

  • Exit Class for Inbound Mail not getting triggered

    Hi Gurus,
    I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
    I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
    If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
    I have made all the settings for SMTP.
    Kindly guide me with the steps needed to be followed for triggering the Exit Class.

    Hi
    Check u have maintained ur outgoing mail server IP in SCOT transation.
    Check link step to configure PO mail.
    http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

  • Event not getting triggered for a few users in production

    Hi Experts!!
    We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
    When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
    Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
    Your help is highly appreciable.

    Hello Srinivas !
                  Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
                  If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
                  Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
                 Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
    Regards,
    S.Suresh

  • User command is not getting triggered in interactive ALV with LIST display

    Hi experts,
    I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
    It gives the following information instead.
    "Choose a valid function".
    (My user command name and its respective form name are same.)
    Here is my code..
    START-OF-SELECTION.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program       = sy-repid
          i_structure_name         = p_table
          i_callback_user_command  = 'TST1'
          i_callback_pf_status_set = 'SET_PF_STATUS'
        TABLES
          t_outtab                 = <dyn_table>
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
      ENDIF.
    FORM tst1 USING r_ucomm LIKE sy-ucomm
                    rs_selfield TYPE slis_selfield.
    * Local data declaration
      DATA: li_tab TYPE REF TO data,
            l_line TYPE REF TO data.
    * Local field-symbols
      FIELD-SYMBOLS:<l_tab> TYPE table,
                    <l_wa>  TYPE ANY.
    * Create table
      CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
      ASSIGN li_tab->* TO <l_tab>.
    * Create workarea
      CREATE DATA l_line LIKE LINE OF <l_tab>.
      ASSIGN l_line->* TO <l_wa>.  CASE r_ucomm.
    *   When a record is selected
        WHEN '&IC1'.
    *     Read the selected record
          READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
          rs_selfield-tabindex.      IF sy-subrc = 0.
    *       Store the record in an internal table
            APPEND <dyn_wa> TO <l_tab>.
    *       Fetch the field catalog info
            CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
              EXPORTING
                i_program_name         = 'Z_DEMO_PDF_JG'
                i_structure_name       = p_table
              CHANGING
                ct_fieldcat            = i_fieldcat
              EXCEPTIONS
                inconsistent_interface = 1
                program_error          = 2
                OTHERS                 = 3.
    Please advice what is the msitake i have done here..

    Read the following code:
    pass the  i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                            selfield TYPE slis_selfield.
    as shown below.
    thanx
    Data for ALV display
    DATA  : gt_fieldcat TYPE slis_t_fieldcat_alv,
            gt_events           TYPE slis_t_event,
            g_variant LIKE disvariant,
            g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
            g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
            gt_list_top_of_page TYPE slis_t_listheader,
            g_repid LIKE sy-repid,
            gf_pos TYPE i
    Data for ALV display
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
               EXPORTING
              i_callback_program      = g_repid
                 i_callback_program      = sy-repid
                 it_fieldcat             = gt_fieldcat[]
           it_events               = gt_events[]
              i_callback_user_command = g_user_command
                 i_save                  = 'A'
                 is_variant              = g_variant
               TABLES
                 t_outtab                = it_print.
    FORM user_command USING ucomm    LIKE sy-ucomm
                            selfield TYPE slis_selfield.
      CASE ucomm.
        WHEN '&IC1'.
          CASE selfield-sel_tab_field.
            WHEN '1-KUNNR'.
              READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
              IF sy-subrc = 0.
                SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
                CALL TRANSACTION 'BP'.
              ENDIF.
            WHEN '1-MATNR'.
              READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
              IF sy-subrc = 0.
                SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
                CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
               GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
               SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
               SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
               CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
              ENDIF.
    Endcase.
    Endform.

  • Enable User task is not getting triggered

    Hi All
    We have a provisioning workflow configured. "Enable User" task is not getting triggered while the user is enabled in OIM. Can anyone give a clue as to how to get it triggerd? Rest all the tasks are fine (Create, Disable, Delete, and other custom tasks)
    Thanks,
    Vinay

    There is a OOTB scheduled Task "Enable After Start Date". once the user get enabled in OIM user profile. You have to run this task manually to have effect on corresponding RO for enablement. Else it will execute automatically as per scheduled time.
    if the version of OIM is 11.1.1.5. There is an issue. update patch BP02. for same
    --nayan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for