User-exit on FBL5 customer line item display

Hello.
A customer has a payment term of 5% 10 days, 2% 15 days, net 30 days.
SAP provides RFPOS-ZALDT as the 1st cash discount date (invoice date + 10 days). However, there is no field that would show the 2nd cash discount date (invoice date + 15 days).
Is there a user-exit that would allow me to show the 2nd cash discount date in FBL5?
Thanks in advance.
Arnold

hi arnold,
welcome to sdn.
i think this wont be possible as coz it may keep on extending like for 15 dayz,30 dayz etc..
the only thing u could do is you can use the field RFPOS-ZALDT for displaying the values like 15,30 etc based on the condition using some exits.
Cheers,
Abdul Hakim
Mark all useful answers..

Similar Messages

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

  • Is there a user exit to modify PO line item level..

    Dear Friends,
    Is there a user exit to modify PO line item level..
    Ravi

    Hi...I'm not sure on any available customer exits for this purpose. However you can use the check function exit 'EXIT_SAPMM06E_012' of customer exit MM06E005 and using memory pointers you can change the item level data.
    The other option is to use BADI ME_PROCESS_PO_CUST's method PROCESS_ITEM to change the item level value. I would prefer the BADI rather than the customer exit.. Hope it works..
    Thanks,
    Jude

  • Customer line item display

    Hi All,
    I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
    Thanks,
    Veni.

    Hi All,
    I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
    Thanks,
    Veni.

  • Customer balance confirmation does not equal to customer line item display

    Hi All
    When I run F.17 transaction (program SAPF130D) the totals don't equal to "customer line item display" program (FBL5N) totals.
    When I run it for a specific customer and company code, I can see that some items from the customer line item display are missing. These are regular items (invoices) like other documents that appear in the balance confirmation.
    The selection parameters are the same and the date is equal - I run the report as of today.
    Can anyone advice please?
    Thanks
    Ofer

    Hi
    The problem was because of a customer hierarchy issue. Some of the invoices were issued to different sold to but with the same payer.
    It can be displayed also in the balance confirmation. I just need to mark the two check boxes:
    "Head offices and branches" and "check alternative head offices". Excellent.
    Now I have another problem, that in this case, this issue is mentioned in the output: "Dear customer, in this balance confirmation we added the next branches...etc."
    Can this remark be eliminated from the output?
    Thanks
    Ofer

  • User Exit for Purchase Order Line Items.

    I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything.  I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document.  Any direction you can point me into would be greatly appreciated.  Thanks.

    Thanks for pointing me in the right direction.  I was able to create my first BADI using the PROCESS_ITEM method.  The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • T code for vendor,customer line item display

    we are using ecc 6.
      I would like to know the wheter any tcode is available in ECC6 for cust and vendor line item display.
    NEW TCODE for FBL3N is FAGLL03. Like that any new new tcode is availbale for FBL1N & FBL5N?
    Please clarify.
    Thanks
    Rajesh

    Dear Rajesh,
    There are not direct 'replacement' as the FAGLL03->FBL3N for FBL1N and FBL5N.
    So the FBL1N and FBL5N can be used further without any problem.
    As stated before, only the G/L are has directly changed.
    But in the relation to the New G/L, there are two new 'Recherche' tools for the vendor and customer area in relation to the 'Segment' and 'Profit Center'.
    You can find them in the FGI0 transaction.
    They are called:
    0SAPRECIEV01
    0SAPRECIEV02
    0SAPPAYABL01
    0SAPPAYABL02
    Maybe they can also help you further.
    Best regards,
    Christoph

  • Text blank in Customer line item display for credit notes

    Dear SD gurus,
    We are creating credit memo request in SAP and credit notes are created later on. Now when we look the customer line items, the credit note number is seen over there. But the text field is coming blank. We want to enter some text in the credit memo request and the same should be displayed in the customer ledger i.e., customer line items.
    Kindly suggest some solution.
    Thanks in advance.

    Hi
    Can you elaborate more? Is it that the text is not getting copied form Refernce document to subsequent document ?
    Regards
    Deepak

  • Profit center  in Customer Line item display FBL5N

    Hi All,
    when we post to the customer, at the customer line item we cant enter any profit center (as there is no field to input). But at the postig to GL (line item 2) we have the profit center to key in .
    But when using the standard report FBL1N, we have the field Profit center In the change layout.... Why is this provided. Does when we post to the GL line item with  profit center , is it copied to the filed ?
    Is there any configuration missing or need to be done.
    Please advise .........
    Best Regards
    st

    Hi ,
    When you use PCA the idea is to capture revenues and profits on P&L accounts and by assigning some balance sheet accounts in config.
    subsequently for AR and AP accounts you do the periodic transfer and that is when you assign the Profit Center based on the ofsetting entry.
    As per SAP you cannot have a profit center at that point of time since a billing document can have multiple lines/multiple profit centers where as on line to the vendor/customer.
    Let me know if you need further explanation.
    Thanks,
    Praveen

  • Reg fbl5n customer line item display

    I n FBL5n report wbs element field value is not displaying
    When posting the invoice through FB70
    wbs element field name PROJK
    I have searched in SDN but any thread not related to this one
    Suggest me how to display the value
    Regards
    Suri
    Edited by: mannem suresh9 on Dec 23, 2011 7:06 PM

    Hi
    If you don't have available this field, you can enhance FBL5N list. Please, see the article [Offsetting Account Description in FBL3N & FAGLL03 u2013 GL Line Item Display Reports|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8011026d-eb5d-2e10-b9bb-d0601949b86a?QuickLink=index&overridelayout=true] by Imran Mohammad Khan. K in this site.
    I hope this helps you
    Regards
    Eduardo
    PD: See also [Addition of Fields in Line Item Display Report Output for TCode FBL1N/FBL5N|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d6c489-aa3a-2e10-db88-deb9114b6854?QuickLink=index&overridelayout=true] by Swapnoneel Mukherjee.
    Edited by: E_Hinojosa on Dec 27, 2011 9:37 AM

  • User-exit to fill PO line item G/L account no. and other details

    Hi All,
    I am looking a customer function or a BADI to fill in the account number when PO is about to be created.
    My requirement is that based on some conditions account number in Account assignment tab for PO line item should be filled or overwritted if there is already a one selected, so that when user see the value for account number, it is the desired one.
    I tried with exit EXIT_SAPMM06E_006, which has the table TEKKN(account assignment for purchasing document) parameter but when I debugg it and assign some other value to TEKKN-SAKTO for the corresponding line item, I can see that changed value is not coming.
    Any clue?
    Regards,
    Mark

    Hi Mark,
    You can try implementing follwoing BADI's:
    ME_GUI_PO_CUST
    ME_PROCESS_PO_CUST
    Let me know if it helps.
    Gouri.

  • User exit - VA01 - Adding new line items while Sales Order Creation

    Hi All ,
    I have a requirement where : in VA01 , i have to add new line items using USER EXIT or BADI.
    The scenario is : we maintain Characteristics for Material. When we select a particular characteristics, Factor and length will be displayed in a Popup. we can specify the Factor and lenght.
    Here , if i specify Factor as 10 and lenght as 1000. the Material has to be cut / split into 10 items of 1000 mts each. and the ITEMs table control should get 10 ITEMS .
    How to add new items using User exit or Badi in VA01 while creating a sales order.
    i have identified the user exit . What code should be used to add new line items.
    kindly help me in solvng this.
    Waiting for your replies.
    Thanks in advance.
    Suki.

    hi
    wich user exit do you take for that ???

  • User-exit for deletion of line item in PO

    hi group
    i want to delete a line item of purchase order.
    and after that i have to make some changes
    so i want to know which user-exit will be used here.
    please help its urgent.

    Hi,
    Please fine the list of user exits for the transaction ME22.
    If it serves your purpsoe , please close the thread and reward suitable points.
    Regards,
    Irfan Hussain
    Transaction Code - ME22                     Change Purchase Order
    Exit Name
    Description
    AMPL0001
    User subscreen for additional data on AMPL
    LMEDR001
    Enhancements to print program
    LMELA002
    Adopt batch no. from shipping notification when posting a GR
    LMELA010
    Inbound shipping notification: Transfer item data from IDOC
    LMEQR001
    User exit for source determination
    M06B0001
    Role determination for purchase requisition release
    M06B0002
    Changes to comm. structure for purchase requisition release
    M06B0003
    Number range and document number
    M06B0004
    Number range and document number
    M06B0005
    Changes to comm. structure for overall release of requisn.
    M06E0004
    Changes to communication structure for release purch. doc.
    M06E0005
    Role determination for release of purchasing documents
    ME590001
    Grouping of requsitions for PO split in ME59
    MEETA001
    Define schedule line type (backlog, immed. req., preview)
    MEFLD004
    Determine earliest delivery date f. check w. GR (only PO)
    MELAB001
    Gen. forecast delivery schedules: Transfer schedule implem.
    MEVME001
    WE default quantity calc. and over/ underdelivery tolerance
    MM06E001
    User exits for EDI inbound and outbound purchasing documents
    MM06E003
    Number range and document number
    MM06E004
    Control import data screens in purchase order
    MM06E005
    Customer fields in purchasing document
    MM06E007
    Change document for requisitions upon conversion into PO
    MM06E008
    Monitoring of contr. target value in case of release orders
    MM06E009
    Relevant texts for "Texts exist" indicator
    MM06E010
    Field selection for vendor address
    MMAL0001
    ALE source list distribution: Outbound processing
    MMAL0002
    ALE source list distribution: Inbound processing
    MMAL0003
    ALE purcasing info record distribution: Outbound processing
    MMAL0004
    ALE purchasing info record distribution: Inbound processing
    MMDA0001
    Default delivery addresses
    MMFAB001
    User exit for generation of release order
    LWSUS001
    Customer-Specific Supply Source Determination in Retail
    MRFLB001
    Control Items in Release Creation
    No of Exits:         33

  • Head office customer line item display FBL5N

    Hi Gurus,
                  I have assigned head office (customer number) in the customer master of Brach office and i have also maintained sort key as 004. But when i execute FBL5N by entering the head office code in the dynamic selection of FBL5N report i am only getting Brach line items the report is not displaying the head office line items, can any one explain is it a standard behaviour or am i missing anything here?
    My system environment is ECC6.
    Thanks in advance
    SUN

    Hi. as far as I remember FBL5N is using DDF database. So go SE36,structure DDF.Then extracts-Dynamic selection and check if there is the same field which you are entered.If not,then add required.

Maybe you are looking for