User Exit on the save of Billing document (VF01)

Hello All,
I have a requirement where in during the creation of a billing document of a particular type i need to put in a block to prevent the creation of a accounting document and call a workflow to remove the block in the Invoice.
My requirement is that I require a user exit which is triggered on the save of the invoice document so that a call to the workflow can be done where in the runtime information of the document would be available in the workflow for further processing .
Helpful answers would be rewarded.
Thanks in Advance,
Sowmya.

Hi,
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
Depending on the number range, table TVFKD is used to set the billing date (country-specific requirments in Italy).
USEREXIT_NUMBER_RANGE is automatically deactivated when this user exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented or changed.
Refer the help
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
Regards
Kiran Sure

Similar Messages

What are the User Exit Available after saving a Billing Documents

Hi,
What are the User Exit Available after saving a Billing Documents
Regrds,
Binayak

Hi
Check the following Exits for VF01 Tcode
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
Business Add-in
SD_CIN_LV60AU02                         BADI for billing
VOR_WA_FAKTURA                          Billing before Goods Issue
Reward points if useful
Regards
Anji

FB70: User exit when the save button (for posting) has been click

Hi ABAP Gurus,
With regard to FB70, can anyone provide me the name of the user exit that will be triggered when the save button (for posting) has been clicked?
Thanks!

Best Regards.
Brando

Hello Brando,
With FB70 I recommend you implement the user-exit via the Business Add-In (BADI) way and avoid SMOD exits if possible.
The list below are the BADIs that are called by the ECC6.0 system after you click the Save button to post a document. They are listed in the order which they are called before the actual post. You'll have to find the right one as per your requirement - you can view their definition via transaction SE18 then after you find the right one you need to use that definition to create an implementation via SE19. Here again, you'll have to choose the right method that suits your requirement. You'll find the method and class documentation in some cases with examples on how to implement, you need to write the code between the Method..EndMethod statement using the parameters provided by the Method.
1. PPA_CUST_BADI
2. FI_RES_ITEM_CURRENCY
3. AC_QUANTITY_GET
4. BADI_PRKNG_NO_UPDATE
5. FM_POP_CORE
6. FMRI
7. FMRE_BUS_PROCESS
8. FAGL_SET_SEGMENT
9. EXIT_XFMPR1_001
10. BUAVC_CHECK_RESTRICT
11. UKM_R3_ACTIVATE
12. CO_DOCUMENT_INFO
I spent a bit of time debugging FB70 to find this info for you, please appreciate by rewarding points (or else
Good luck.
Cheers,
Sougata.

User Exit to Change Item of Billing Document

While creation of Billing document, I want to change the value of one field in Item Level. i.e. Field is found under Item --> Item Purchase Order data --> Ordering Party --> Your Reference. This field want to change.
So, Can any one let me know, How is this possible (Userexit/BADI) to do.

Go [here|http://help.sap.com/saphelp_46c/helpdata/en/18/f62c7dd435d1118b3f0060b03ca329/content.htm] to view documentation on user exits available for billing processing.
Hope it helps,
Brian

User-Exit to cancel a Sales Billing Document

Hello,
When we try to cancel a Billing Document is there an indication field that specifies that the billing document is to be cancelled or we only can figure it out by the Billing Document type specified for the cancellation.
Thanks,
Alam.

Hi
If a bill is cancelled the field VBRK-FKSTO is setted to X.
U can find the number of the bill cancelled in the field VBRK-SFAKN in the bill cancelling.
Max

The user exit on the sap post the account document

Dear all.
   I use the t-code mb01 or migo to receipt goods for purchase order.When I execute post or save,the sap generate the material document and the account document.The account documents have two item with account 12110000 and account 12010000.And I know this two account was configure in the t-code omwb.
   Now my company have a new requirement:
   When the sap generate the account documents,I need to write some code to do some judgement and change the account 12110000 to account 35510000 or other account.The logic of the code was complex and it's impossible to do in sap standard configure.So I want to find the user exit on the sap post the account document.In the user exit I would write some code to do some judgement and change the account 12110000 to account 35510000 or other account.
But I can't found the user exit.So I need the experts to give me some reference.
Regard
Yoda

Hi,
You may use ZXF48U01 of EXIT_SAPLF048_001 of enhancement F180A001 for the same.
Please note that control comes here for no of transactions hence you need to specifically check for sy-tcode, for which your 'exit' logic needs o be executed.
I hope this helps,
Regards
Raju Chitale

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

User exit MM06E005 - Customer fields in purchasing document

Hi,
I am using user exit MM06E005 - Customer fields in purchasing document to validate the line items in PO and display the value at header level.
My requirement is when the user enters the line items and press enter the validated value should get populated at header level.I had included a tab (customer tab) in that the value should get displayed.
likewise for each and every line items the value should keep on changing.
And
I the field that i had added at header shows the value during the save but once we come out and enter again,it is not displaying the same.
Regards
Manoj

Hi,
Indeed the exit which you have specified MM06E005 comprises the enhancement for customizing fields and screens associated with it. may be you might not have activated the screen associated with the exit. the screen might have been created but missed while activating.
Regards,
Jagath

User Exit in the Sales order create BAPI

Hi,
Can some one help me in telling if there exists a user exit for the BAPI '/AFS/BAPI_SALESORDER_CREATE'.
This is urgent. So, pls. throw some light on this.
Thanks in advance.

Hi
User Exits In Sales Document Processing
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.

User-Exit for the Me22n

Hi,
I am Mohan. I faced on Problem with the User Exit. I write the user exit for the ME21n for PO Creation. While Creation of the PO the Purchase Requition is mandatory. it is working for the ME21n. But PO creation is another two ways is there. Those are ME22N (Purchase order---> Create) and ME23N
(Purchase order---> Create) for this case also my condition applicable but it is not working for this case. How to write the Code for this. by using Sy-ucomm also. but it is not working.
Please help me.
Regards,
Mohan

Following the user exit's related to ME22N transaction.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Regards.

User exit for partner determination in delivery document

Hi,
Can some one suggest an user exit for partner determination in delivery document.
We have a scenario of excluding certain plants for few of the partner determinations in delivery document..
Please suggest
Regards
Ravikumar

Hello Ravikumar,
Please ceck if these userexits help
Normally there are 2 userexits available in function kopierte_partner_pruefen:
- EXIT_SAPLV09A_003
- EXIT_SAPLV09A_004
Regards,
Raghavendra YN

User exit before the call of FM CCARD_AUTH_SIMULATION

HI Gurus
I wanna know if there is any user-exit before the call of FM CCARD_AUTH_SIMULATION, for the structure XVBAK.
I want to manipulate with the document category for that particular order before the order is saved.
If anyone can provide me the user exit for the structure XVBAK then it will be helpful to me.
Thanks
Swarn

go for implicit enhancement option.
Reddy

User Exit at the time of saving Prod Order.

Hi All,
I need to know whether there is any exit which gets called when I save the Production Order.
In our project Serial No as well as Production Order gets created when we save the Production Order.
I have to pass "Basic Start Date" to a FM which generates Serial No.I can hit some DB table if i know
Planned Order no at the time of saving of Production Order.So i want the user exit at the time of saving Prod Order
I have also tried one program which gives all the User exits for a certain Transaction.But the user exit mentioned in that is not getting called.
Thanks in Advance,
Saket.

hi,
check this exit for production order by placing a break point in it.it will work .
PPCO0007 Exit when saving production order
exit name : EXIT_SAPLCOZV_001

User Exit at the time of activity saving

Dear all,
I want to update activity constarints & date based on some logic & want to ensure that at the time of activity saving logic should triggered. I want to use user exit for this.Validation/ substitution is also one option but does not seem feasible. if you know any user exit at the time of activity saving, please share with me.
Regards,
Ashok Sangal

You requirement is to check the constrain based on scheduling . THere is not user exist I believe that may exaclty address your requirement. THan also check below two user exit.
CNEX0028 Check activity release
CNEX0029 Check network release
Ideally yhou should chekc for hte some BAPI for hte network save will help you .
Regards
Nitin P.

User Exit in the sales order

Dear SAP GURUS
When the sales order is created and saved , the business wants a pop up to show asking whether you want to save the order or cancel.
Please suggest how this has to be achieved using a user exit and the coding
regards
SIM

Hi,
     The requirement is fairly simple and need to be just triggered into the program SAPMV45A.
      The code is to put into a subroutine called. PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
      Write the code in the form of the same subroutine and get the job done. Am sure that it'll be a smooth sail.
   Reward points if useful.
Thanks,
Tej..

User Exit on the save of Billing document (VF01)

Similar Messages

Maybe you are looking for