User Exit only ME22N
Dear All,
I have implemented on USER_EXIT for ME22N.
but data is not passing added field to Database table EKKO.
and I want only Display the Added TAB only ME22N T-CODE ONLY. It is showing all ME21N AND ME23N TCODE ALSO.
Please help on this.
Regards,
Parshuram.
Dear Sir,
I am implementing th BADI ME_GUI_PO_CUST.
Please tale me which program i have to create screen and how to attached it to standard t-code me22n.
please help step by step.
Reagards,
parshuram.
Similar Messages
-
Hi,
I am looking for an user-exit in ME22N transaction. My actual requirement is when I change account assignment category ( EKPO-KNTTP), the confirmation control (EKPO-BSTAE) should be defaulted with some value say 002.
I have noticed user-exit Function modules EXIT_SAPMM06E_007 and EXIT_SAPMM06E_017. There is a table TEKPO in the tables parmater of this FM's. I can see the values in fields TEKPO-KNTTP and TEKPO-BSTAE also. But when I change the values, suppose I set TEKPO_BSTAE = 002, It is not getting reflected in the transaction ME22N.
Can you please guide me, if the user-exits I have chosen are right ones to achieve the functionality or any other values in the user-exits need to be updated. Are there any BADI's for this kind of requirement.
Thanks in advance.
Vishnu PriyaHi Vishnu Priya,
Inside the implementation for method 'IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM', use the method im_item->get_header to get the header details, then use method im_item->get_data to get item details. Now, you can pass the new value to the required fields and finally use im_item->set_data to set the values to PO.
You can see the methods available for the associated type of parameter IM_ITEM by double clicking on IF_PURCHASE_ORDER_ITEM_MM.
Make use of available methods to get the required details and proceed accordingly.
Best Regards,
Kumar. -
User Exit for ME22N while saving of PO
Hi all,
i want a USER EXIT for ME22N while saving. i want EKET data.
After checking EKET data, i want to chage EKPO data.
Thanks
pabiHi,
Below Exit you can have access to EKET and EKPO data in the tables paramters before the SAVE
EXIT_SAPMM06E_012
TEKPO: EKPO data
TEKET: EKET data
Enhancement:MM06E005 (Check in SMOD transaction)
Check for one Paramter: I_TRTYP (This is for Create/Change/Display Modes) or You can check on Sy-Tcode = ME22N
Hope this helps
Regards
Shiva -
Urgent: User exit for ME22N and ME32K transactions
I need to know a user exit(s) for changing Purchase Order and Contract line item fields from EKPO table. Please let me know if you know any. BADIs are also fine if the user exit does not exits. Thanks
Dear AP,
I'm enlisting all the exits :-
Transaction Code - ME22N Change Purchase Order
Exit Name
Description
AMPL0001
User subscreen for additional data on AMPL
LMEDR001
Enhancements to print program
LMELA002
Adopt batch no. from shipping notification when posting a GR
LMELA010
Inbound shipping notification: Transfer item data from IDOC
LMEQR001
User exit for source determination
LMEXF001
Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001
Customer-Specific Source Determination in Retail
M06B0001
Role determination for purchase requisition release
M06B0002
Changes to comm. structure for purchase requisition release
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to comm. structure for overall release of requisn.
M06E0004
Changes to communication structure for release purch. doc.
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requsitions for PO split in ME59
MEETA001
Define schedule line type (backlog, immed. req., preview)
MEFLD004
Determine earliest delivery date f. check w. GR (only PO)
MELAB001
Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1
Enhancement to Document Overview ME21N/ME51N
MEVME001
WE default quantity calc. and over/ underdelivery tolerance
MM06E001
User exits for EDI inbound and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control import data screens in purchase order
MM06E005
Customer fields in purchasing document
MM06E007
Change document for requisitions upon conversion into PO
MM06E008
Monitoring of contr. target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MMAL0001
ALE source list distribution: Outbound processing
MMAL0002
ALE source list distribution: Inbound processing
MMAL0003
ALE purcasing info record distribution: Outbound processing
MMAL0004
ALE purchasing info record distribution: Inbound processing
MMDA0001
Default delivery addresses
MMFAB001
User exit for generation of release order
MRFLB001
Control Items for Contract Release Order
No of Exits: 35
Transaction Code - ME32K Change Contract
|Exit Name|Description |
AMPL0001
User subscreen for additional data on AMPL
LMEDR001
Enhancements to print program
LMELA002
Adopt batch no. from shipping notification when posting a GR
LMELA010
Inbound shipping notification: Transfer item data from IDOC
LMEQR001
User exit for source determination
LMEXF001
Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001
Customer-Specific Source Determination in Retail
M06B0001
Role determination for purchase requisition release
M06B0002
Changes to comm. structure for purchase requisition release
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to comm. structure for overall release of requisn.
M06E0004
Changes to communication structure for release purch. doc.
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requsitions for PO split in ME59
MEETA001
Define schedule line type (backlog, immed. req., preview)
MEFLD004
Determine earliest delivery date f. check w. GR (only PO)
MELAB001
Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1
Enhancement to Document Overview ME21N/ME51N
MEVME001
WE default quantity calc. and over/ underdelivery tolerance
MM06E001
User exits for EDI inbound and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control import data screens in purchase order
MM06E005
Customer fields in purchasing document
MM06E007
Change document for requisitions upon conversion into PO
MM06E008
Monitoring of contr. target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MMAL0001
ALE source list distribution: Outbound processing
MMAL0002
ALE source list distribution: Inbound processing
MMAL0003
ALE purcasing info record distribution: Outbound processing
MMAL0004
ALE purchasing info record distribution: Inbound processing
MMDA0001
Default delivery addresses
MMFAB001
User exit for generation of release order
MRFLB001
Control Items for Contract Release Order
No of Exits: 35
Regards,
Deva. -
User Exit in ME22N with version management
Hi Experts,
I have implemented the userexit MM06E005 with FM - EXIT_SAPMM06E_012 . and in Include program i have given the code.
CASE sy-tcode.
when 'ME22N'.
IF SY-UCOMM = 'MECHECKDOC' or sy-ucomm = 'MESAVE'.
If i_ekko-PROCSTAT = '01'.
message 'Please tick the Version Completed in Version Tab' type 'E'.
endif.
ENDIF.
if the user changes in ME22n it will generate the version automatically that time before saving or checking the prog it will show the error message to check the version tab.
It is working fine using this Exit.But,Some of the fields in Item details tab Material data ,Invoice ,Quantity and all not at all generating the version.Some fields if user makes change it is generating version and error.but some fields it is not happening.
If anybody know the userexit to generate the version pl.tell me or tell me the alternate way.
Thanks in advance,
Regards,
NandhaHi Experts,
I have implemented the userexit MM06E005 with FM - EXIT_SAPMM06E_012 . and in Include program i have given the code.
CASE sy-tcode.
when 'ME22N'.
IF SY-UCOMM = 'MECHECKDOC' or sy-ucomm = 'MESAVE'.
If i_ekko-PROCSTAT = '01'.
message 'Please tick the Version Completed in Version Tab' type 'E'.
endif.
ENDIF.
if the user changes in ME22n it will generate the version automatically that time before saving or checking the prog it will show the error message to check the version tab.
It is working fine using this Exit.But,Some of the fields in Item details tab Material data ,Invoice ,Quantity and all not at all generating the version.Some fields if user makes change it is generating version and error.but some fields it is not happening.
If anybody know the userexit to generate the version pl.tell me or tell me the alternate way.
Thanks in advance,
Regards,
Nandha -
Hi Friends,
I want to create an User Exit to create a Change pointer.
When a change is made to TCode ME22N.
The Change pointer is used to Update EKES Table.
It would be helpfull. If any one can suggest an User Exit Specific to this issue.Hi Sudhir,
I will suggest you check with this badi ME_PO_PROCESS_CUST .
Regards,
Madhu. -
Hi!
Here's our scenario: we wanted our PO to be non-editable when it comes to price when it has already a goods receipt. But right now, the system allows it and no available system messages can suffice the requirement. Is there an available user exit for this?
Thank you.Hi,
Do one thing use the BADI ME_PROCESS_PO_CUST .....in this you have one method PROCESS_ITEM use this and try to pass error message depending on your condition(whether goods reciept happend or not)....
Thanks,
Shailaja Ainala. -
BADI/user exit for me22n - disable/grey out field quantity (MEPO1211-MENGE)
Dear all SAP gurus,
When changing PO (ME22N), I need to disable (grey out) the quantity field on item (MEPO1211-MENGE), when all scheduled quantity is already received (EKET-MENGE = EKET-WEMNG).
Have tried using LMEIGICJI and Handle_event method in CL_SCREEN_VIEW_MM. But still doesn't go to the screen that wants to be disabled.
Tried using BADI ME_PROCESS_PO_CUST, but couldn't find how to disable the quantity field.
(IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM only works for custom field).
Please kindly advise
thanks in advanceHi Ahmad,
No need of ABAP, follow this IMG Path.
Material Management -> Purchasing - Purchase Order -> Define Screen Layout at Document Level
After Executing it . Choose ME22 from list and then choose display icon.
than double click Quantity and Price here uncheck opt. Entry and check display.
save your work.
Hope this works.
Regards
Ahsan -
User exit in ME22N to change standard fields
Dear all,
I'm trying to change the delivery date from exit EXIT_SAPMM06E_013 but the system doesn't keep my changes. I'm able to change the delivery date in exit EXIT_SAPMM06E_017 but I need to make it from exit 013 because I need know the confirmations from tables XEKES/YEKES.
I'm on release 4.6C and I don't have the chance to use the BADI ME_PROCESS_PO_CUST.
Is there a way to make this from exit 013?
Here is the code I'm trying to use:
DATA : wa_table(100) TYPE c,
t_ett TYPE STANDARD TABLE OF beket,
wa_ett TYPE beket.
FIELD-SYMBOLS: <fs_ett> TYPE ANY TABLE.
IF sy-tcode = 'ME22N'.
wa_table = '(SAPLMEPO)ETT[]'.
ELSEIF sy-tcode = 'ME22'.
wa_table = '(SAPMM06E)ETT[]'.
ELSE.
EXIT.
ENDIF.
ASSIGN (wa_table) TO <fs_ett>.
t_ett[] = <fs_ett>[].
LOOP AT t_ett INTO wa_ett.
IF sy-tcode(4) = 'ME21'.
wa_ett-eindt = sy-datum.
ELSEIF sy-tcode(4) = 'ME22'.
wa_ett-eindt = sy-datum.
wa_ett-updkz = 'U'.
ENDIF.
MODIFY t_ett FROM wa_ett.
ENDLOOP.
<fs_ett>[] = t_ett[].
UNASSIGN <fs_ett>.
Thanks for your help.
ElioHi,
I am facing the same pbm.
I am trying to change PO Order Qty (Menge) based on a formula.
I have tried writting the code at the exits :
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_013
I am also working on REL 4.6c. facing the same pbm. The value does not stay...!!
By now, you must have resolved the pbm.
How did you?
Regards,
remi -
User exit for ME22N in throwing an error message.
Dear Experts,
I have a requirement here :
PO is created, and see it in ME22N ,we see line items. In a line item when we make changes in PO Quantity or value and save it, then Select the line item and Go to -> Environment-> Item changes. It takes to a screen where a new doc no is generated. Whenever we make changes in PO Quantity or value and save and navigate through Go to -> Environment-> Item changes, it generates a doc number.Similarly,it can generate any no.of doc nos for the changes we make.For each change in line item ( in PO Quantity or Value ) it generates each doc number.
My requirement is to restrict the user not to generate more than 3 doc numbers.After 3 doc numbers are generated and user tries to change line item PO or value for another doc no, an error message has to be thrown to stop the user.
Please guide me in this requirement.
Thanks in advance.
Anticipating your early reply.
Thanks,
ranisinHi,
Use change pointers
Function Modules :
1) CHANGE_POINTERS_CREATE
2) CHANGE_POINTERS_READ
3) CHANGE_POINTERS_STATUS_WRITE
4) CHANGE_POINTERS_READ_MODE_SET
5) CHANGE_POINTERS_READ_INFO_GET
Tables :
1) BDCP - Change pointer
2) BDCPS - Change pointer: Status
3) BDCP2 - Aggregated Change Pointers (BDCP, BDCPS)
4) CDPOS - Change document items
5) CDHDR - Change document header
Tcodes :
1) BD61 u2013 Activate change pointers.
2) BD50 u2013 Activate change pointer s for message types.
Hope this helps you.
Thanks and Regards,
Ranjith Nambiar -
Change PO Output, user exits
Hello Champions,
Will anyone share me, is there any user exit which triggers while changing Purchase Order Output Medium in ME22N transaction. How to know list of user exits which are applicable for ME22N transaction?. will anyone guide me.
Reward with Full pointsHi,
Here are the list of User Exits for ME22N
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
Edited by: Raj on May 12, 2008 10:05 PM -
User exits while changing the PO Output Medium
Hello Champions,
Will anyone share me, is there any user exit which triggers while changing Purchase Order Output Medium in ME22N transaction. How to know list of user exits which are applicable for ME22N transaction?. will anyone guide me.
Reward with Full pointHi PV,
These are the list f User exits for ME22N:
Exit Name Description
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Regards,
Maia -
User exit function module include how to write the code
hi all,
i am creating user exit for ME22N using this enhance MM06E005 .
in this i created subscreen and set some fields .
that data has to be stoe in EKPO.
inside the include i have to write the logic plz guide me how to follow .
once i enter it will store on wish internal table and wish internal table to shall i move to EKPO .
If Tcode is ME23N how to display data in disable mode.
Regards,
Hari.This is the code inside the function module .
once i enter data in custom field the below wish table it will store.
FUNCTION EXIT_SAPMM06E_016.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_EKPO) LIKE EKPO STRUCTURE EKPO
*" VALUE(I_AKTYP)
*" VALUE(I_CI_EKPO) LIKE EKPO_CI STRUCTURE EKPO_CI
*" VALUE(I_BSTYP) LIKE EKKO-BSTYP
*" VALUE(I_NO_SCREEN)
*" VALUE(I_LFA1) LIKE LFA1 STRUCTURE LFA1
*" VALUE(I_LFM1) LIKE LFM1 STRUCTURE LFM1
*" VALUE(I_EKKO) LIKE EKKO STRUCTURE EKKO
*" VALUE(I_REKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_KEKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_AEKPO) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_REBAN) LIKE EBAN STRUCTURE EBAN OPTIONAL
*" VALUE(I_MT06E) LIKE MT06E STRUCTURE MT06E OPTIONAL
*" VALUE(I_EINA) LIKE EINA STRUCTURE EINA OPTIONAL
*" VALUE(I_EINE) LIKE EINE STRUCTURE EINE OPTIONAL
*" VALUE(I_EKPO_OLD) LIKE EKPO STRUCTURE EKPO OPTIONAL
*" VALUE(I_KOMP) LIKE KOMP STRUCTURE KOMP OPTIONAL
*" VALUE(I_ENJ_CALL) OPTIONAL
*" TABLES
*" TEKPO STRUCTURE BEKPO OPTIONAL
*" TEKET STRUCTURE BEKET OPTIONAL
*" TEKKN STRUCTURE EKKNU OPTIONAL
*" TKOMV STRUCTURE KOMV OPTIONAL
INCLUDE ZXM06U41 .
ENDFUNCTION.
inside the INCLUDE ZXM06U41 . i writen this code
*& Include ZXM06U41
DATA :
FS_EKPO TYPE EKPO_CI.
IF ( SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'
OR SY-TCODE EQ 'ME22' OR SY-TCODE EQ 'ME23' ) .
LOOP AT TEKPO.
IF ( TEKPO-EBELN EQ i_EKPO-EBELN
AND TEKPO-EBELP EQ i_EKPO-EBELP ) .
EKPO_CI-ZMATERIAL = TEKPO-ZMATERIAL.
EKPO_CI-ZQUANTITY = TEKPO-ZQUANTITY.
EKPO_CI-ZUNIT = TEKPO-ZUNIT.
EKPO_CI-ZPRICE = TEKPO-ZPRICE.
EKPO_CI-ZCURRENCY = TEKPO-ZCURRENCY.
ENDIF.
ENDLOOP.
ENDIF.
Regards,
Hari. -
User Exit not getting triggered
Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
LakshmiHi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha -
Cascading Prompt in User Exit.
Hi Gurus,
I have an enhancement requirement for user exit, but not sure if it could be possibly done. I'll try to make this as explicit as possible. Basically, now I have 2 prompts:
Prompt A - List of Cars
Prompt B - Cars Model
I have been given a requirement to actually filter my selection list of cars based on the cars model. For example, by default List of Cars has 10 Cars before I input anything on the Cars Model. Once I inputted something on Cars Model, my List of Cars should be lesser than 10 Cars (maybe 8 Cars) now due to the unavailability of the Cars based on the Cars Model.
From my understanding, the user exit only will be kick start once the execute button is triggered in RSRT t-code and not on the selection list. So, is it possible to do something like this in user exit? Let me know if this is still unclear.
Regards,
KilohHi Bala,
As of I know your requirement is not possible.
If you have city object then it is possible
or
Apply prompt for both country and state with "and"
Regards
Riaz
Maybe you are looking for
-
Crw32.exe has encountered a problem and needs to close while running report
Ever since I installed HEAT 9, Crystal Reports 11 crashes periodically. I get the message "crw32.exe has encountered a problem and needs to close." This message usually appears after I run a report, enter my DB credentials, and enter parameters. I
-
After I publish my video it just plays but there is no indication of how much time is remaining on the video while watching. How do I display this
-
Abap report for budget/actual/commitment
Hi Guru.. Please help me. Im in urgent I wanna write an abap program for budget/actual/commitment. I try to trace prgram s_alr_87013019, but only one table found. Please let me know which table is using for budget/actual/commitment report.. Please gu
-
Clean Install On 3rd Party SSD
My brother has given me his 2010 MacBook Pro with a 256GB SSD running 10.9 and I want to do a clean install of OS X 10.10. Can this be done with a Bootable USB? I have read a few things about this called Trim and was wondering if I need to do somethi
-
How can i stop automatically image loading in my browser?
there is no option of stoping automatically image loading in my firefox 25.01 as this option was in old firefox. Pls help!!!!!!!