User exit or BADI for business area in sales order

Hi,
At present the business area in the sales order is greyed.i want to remove the greyed field and put some input value to the business area when a new sales order is created....
Please suggest the user exits or BADIS
Kanishak
Edited by: Kanishak Gupta on Feb 4, 2010 1:06 PM

Hi Kanishak
You can use userexit userexit_cobl_send_header
If you overule the settings, you will be able to enter business area ( GSBER )
Also, try out:
userexit_cobl_receive_vbak to transfer the screen value entered by the user back to vbak-gsber.
If item level is also necessary you also need :
userexit_cobl_send_item
userexit_cobl_receive_vbap
Hope this helps.
Harsh

Similar Messages

User exit or badi to restrict PROO in Sales Order for certain sales organisation

Hi SAP SD experts,
I would like to know the User exit or badi to restrict PROO in Sales Order for certain sales organization. This can be done by making condition type as D but will affect all sales org and we to restrict for a certain sales org only.
thanks,
SG

Kindly explained how you have solved others may benefit..
regards
Arunkumar

User Exit or BADI in APO to change sales order relevant data while CIF

Hi Everyone,
I require User exit or BADI at APO side to change customer field kunnr of sales order after it enters APO through CIF.
My requirement is to replace KUNNR field with KDGRP field of sales order.
The data will pass through CIF in APO.
Is there any user exit or BADI for the same?
Sample code will be of great help.
Regards,
Kashyap.

Hi ,
Resolved myself.
customer exit APOCF010
Regards,
Kashyap

User-exit or badi for partners check in Purchase order

hello all
is there a user exit or badi i can use in order to perform a check on the partners in a PO?
I want it to perform the check also if I change any of the partners at a later stage.
thanks
Alisa

Hi,
I have similar requirement, however the BADI name you mentioned does not exist.
Pls let me know the right one.
Thanks,
Dipak

User exits/BAdIs for Forecast consumption by sales order

Hello Experts,
My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
My requirement is:
For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
I appreciate if anybody explain me the process?
Thanks in advance!
Raj

Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
There is no standard way of making the sales order visible in another location.
Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
Can you be more specific.
THanks
Kumar

User Exits or BADI for Tcode ME51N

Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
Paras

Hi Paras,
Copy this program and execute. Will get all list of existin g Exits and Badis.
very useful program
Below code will give a list of BADIs for particular transaction.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Reward points if this helps.
hema.

User Exit or Badi for CN60 transaction

Hi
Can anyone tell me the user exits or Badis for Tcode CN60.
i need to Include the Comments field for the activities from CN22.soi would like to know is there any userexit for CN60.
Thanks
Sowjanya

Hi Sowjanya
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
reward points to all helpful answers
kiran.M

How to find the list of USER-EXITS or BADI for the transaction ABSO

Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanaraj

Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.

User exit or badi for me52n transaction.

Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.

In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards

User exit or BADI for recruitment

Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
Santosh

Hi,
InfotypeThe data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
Function character of step
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
Variable function part
The variable function part, which depends on the indicator for step, can have the following meaning:
P - Plausibility checks
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
I - Maintain infotype record
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
 .... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
 .... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
W - Default values for new record
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
V - Cross-reference to another step
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
F - Call a routine
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
M - Send a mail
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
ADDITIONAL HINTS
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd

User exit or BADI for purchase order

Hi,
I want send outbound IDOC for purchase order to 3rd party integration system.
It is too hard to map between standard purchase order IDOC and business object of 3rd party system because the structure of standard purchase order IDOC is so complicated.
So I want bring purchase order data into CBO table when purchase order is created or released. And this data will be inserted CBO IDOC for more simple structure than standard one.
I'm trying to find some of user exit or BADI to insert from standard purchase order to CBO table in the time of purchase order is created or released.
And I'm trying to find another way using message type.
As far as I know it is possible to set sending IDOC in the purchase order message type setting in IMG.
Is anyone who has related situation or know the way to do this?

Hi,
I have similar requirement, however the BADI name you mentioned does not exist.
Pls let me know the right one.
Thanks,
Dipak

Need user exit or BADI for FB60

Hi Guys!!,
I am working on one object which   belongs to FB60 transaction. I have to give error message when user enter the ZTERM Value above 45 days for particular vendor group(MSMED).please help out.
Richard.

Hi,
Foloowing are available user exits and BADIs for FB60.
F050S001                                               FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002                                               FIDCC1: Change IDoc/do not send
F050S003                                               FIDCC2: Change IDoc/do not send
F050S004                                               FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005                                               FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006                                               FI Outgoing IDoc: Reset Clearing in FI Document
F050S007                                               FIDCCH Outbound: Influence on IDoc for Document Change
F180A001                                               Balance Sheet Adjustment
FARC0002                                              Additional Checks for Archiving MM Vendor Master Data
RFAVIS01                                               Customer Exit for Changing Payment Advice Segment Text
RFEPOS00                                              Line item display: Checking of selection conditions
RFKORIEX                                              Automatic correspondence
SAPLF051                                              Workflow for FI (pre-capture, release for payment)
Please find the one suitable to your need.
Hope it will help you.
Regards
Natasha Garg

Need User exit or BAdi for VF01

Hi.
I need User exit or Badi for VF01.
Condtion: After Successful Save of document number in database.
Please help me.
To be reward all helpfull answers.
Regards.
Jay

Hi
The follwing user exits and badis available:
                                                                                Enhancement
V05N0001
User Exits for Printing Billing Docs. using POR Procedure
V05I0001
User exits for billing index
SDVFX011
Userexit for the komkcv- and kompcv-structures
SDVFX010
User exit item table for the customer lines
SDVFX009
Billing doc. processing KIDONO (payment reference number)
SDVFX008
User exit: Processing of transfer structures SD-FI
SDVFX007
User exit: Billing plan during transfer to Accounting
V61A0001
Customer enhancement: Pricing
V60P0001
Data provision for additional fields for display in lists
V60A0001
Customer functions in the billing document
Business Add-in                                                                                SD_CIN_LV60AU02
BADI for billing
VOR_WA_FAKTURA
Billing before Goods Issue
If it is helpful rewards points.
                     Regards
                      Pratap.M

User exit or badi for this functionality

hi to all experts ,
i need user exit or badi for implementing a customized check to ensure appropriate incoterms is being maintained in PO document . they are maintaining two different incoterms maintained for the same vendor depending on the plant.
thanks in advance

hi,
please give the information about
which transaction??
which field??
i think u need only validation, if check is not present u need to throw error or info mess, right..
regards
vijay

User Exit or BADi for FB02

Hi
Does somebody knows some user exit or BADI for add validations to FB02 when user changes some position data.
I need to validate some header BKPF (Company, Currency) and detail BSEG (Posting Key, Account Bank) data when change the position.
Does somebody knows one user exit or Badi wich i can use to do it ?
Thanks
Frank

Thanks for your answers.
I need to make validations for send error messages and i can not use FI Validations and Sustitutions because i send several differents messages and wuold need N steps (one step for each message).
The enhancement points called in CHANGE_TO_MODIFY are executed when ok-code is 'CHAE' that is when the user calls FB03 and then change to modify mode for make changes like if he goes to FB02 , but these enhancements are no executed any more when the data changes are made and user press save.
I already found some enhancement executed just before data saving (it's in FORM belegsummen_pruefen) so i make the validation and send the error message , but when error message appears the screen get protected so the user can not change any screen field for make the data corrections.
Best Regards
Frank

User exit or BADI for business area in sales order

Similar Messages

Maybe you are looking for