User Exit or BADI for CJ20N for sending an email
Dear SAP Gurus,
I want User Exit or Badi of Tcode CJ20N, for sending an email to the Managers whenever the status is changed.
I want to know which User exit ot BADI will help me to do so
Please do the needful.
Regards
Lakshmikanth K
Plese check if enhancement CNEX0006 can be used for your requirement.
Regards,
Shyam
Similar Messages
-
User exit or badi or enhance for MIRO using Purchase order
Hello All,
When Miro was done using Purchase order i want to change the field BSEG-ZUONR value to assign purchase oder number.
In the setting when the purhcase order was selected but still it comes as blank. could any body suggest the solution.
Thanks in Advance !
Regards
SrinivasHello srinivas,
Exits for the given tcode
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Po
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verifica
Badis and Enhcance spots for the given tcode
Badis Enhcance spots
INVOICE_BW ES_BADI_INVOICE BW Update
INVOICE_UPDATE INVOICE_UPDATE
INVOICE_UPDATE Business Add-In
Thanks,
Santhosh Kumar R
Edited by: santhosh kumar on Dec 23, 2010 9:25 AM -
Is there such a user exit or badi in CJ20N
It is after my save and after the reference table is updated.
For example, I change the partner data in CJ20n of a WBS element.
I want to trgger the code after the table IHPA has been updated by my new partner data.
Thanks a lot.Hi,
pl check
WORKORDER_UPDATE
WORKBREAKDOWN_UPDATE
Regards
Reema -
Request for User Exit or BADIs for outgoing posting block in F-53
Dear Gurus,
Can somebody advice me which user exit or BADIs to use for the below scenario:
My users is using more than one alternative payee for their invoices, therefore when they use F-53 to clear open item, they always accidentally do multiple payment for document no. with different alternative payee. Worst case is that the posting go through! But when they print out the form, its too late and they had to do reversal.
I like to enforce a block so that if the alternative payee is different across the document no. selected, they cannot post.
Desperately,
Belinda
Edited by: Belinda Lee on Jun 3, 2008 5:34 PMHello,
You can use Business Transaction Event (BTE) . You should use 00001120 events.
You must do some customizing in FIBF.
Regards,
Burak -
FBL3N/FBL5N/FAGLL03 user exits and badis for authorization
Hi Gurus,
I have tried userexit and badis for FBL3N , FBL5N and FAGLL03 for the purpose of user want to display documents created by him and other users documents should not display . Please suggest me any user exit or badi and logic for the same.
Moderator message: last warning, if you continue to disregard moderator messages and post the same question nevertheless, I will initiate deletion of your user ID.
Edited by: Thomas Zloch on May 10, 2011 9:57 AMHi,
1. Execute report FBL3n and in the output goto menu SETTINGS -> SPECIAL FIELDS and add the entry BKPF-USNAM and save. Now the user who have created the entry will be available in your FBL*N report.
2. Goto BTE event 00001650 - SAMPLE_INTERFACE_00001650, and copy the FM SAMPLE_INTERFACE_00001650 to custom FM. Inside this custom FM, first pass the value of I_POSTAB to E_POSTAB. i.e
E_POSTAB[] = I_POSTAB[].
Now loop E_POSTAB and check whether E_POSTAB-USNAM NE SY-UNAME, then delete that entry from the internal table E_POSTAB.
3. Now create a custom product in FIBF transaction and check the activate checkbox. Attach the event 00001650 and custom FM to the P/S module customer part.
Hope this will meet your requirement.
Regards,
Harish
Moderator message: please be more selective when replying to questions (especially the "do my work" kind), better check the posters history before investing effort.
Edited by: Thomas Zloch on May 10, 2011 9:59 AM -
Cost center in FB01 - User exit or BADI
Hi,
I would like to change the cost center field data in transaction FB01 with some other data based upon some conditions.
Please suggest with user exits or badi.
thanks.Thanks for reply.
In the user exits mentioned, checking for cost center value in the import parameter DOC_ITEM_TAB and based on some validations i have changed the it to other value. But this new value is not considered by the program still it is creating with the old value.
The changed value has to be exported from the user exit right? this is not happening as we know dont have cost center field in export or changing parameters
Please suggest -
How to find User Exits/ Enhancments/ BADI's for T-code CJ20N
Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure -
User exit or BADI for Tcode ME51N
Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
ParasHai,
User Exit: MEREQ001
Function exit EXIT_SAPLMEREQ_001
EXIT_SAPLMEREQ_002
EXIT_SAPLMEREQ_003
EXIT_SAPLMEREQ_004
EXIT_SAPLMEREQ_005
EXIT_SAPLMEREQ_006
EXIT_SAPLMEREQ_007
EXIT_SAPLMEREQ_008
EXIT_SAPLMEREQ_009
EXIT_SAPLMEREQ_010
Screen exit SAPLMEGUI
Include tables CI_EBANDB
CI_EBANMEM -
Hi,
I need a user exit or Badi for defaulting Plant at line item level.
The scenario goes like this: when ever user tries to change an existing Purchase order and tries to add a new line item in it, I need to trigger USEREXIT or BADI , so that it reads the previous line Plant and updates the current line with the same plant.
I tried with user exit MM06E005 but it didnt seem to work.
Can any one please help me?
I am new to BADI, so I am not sure how to find the BADI and use it. It would be great if anyone can help me i this.
Thanks
RamyaHello
The BAdI ME_PROCESS_PO_CUST is the right one. The method PROCESS_ITEM should be triggered whenever the user changes something in the purchase order at item level and executes any kind of function (e.g. ENTER, CHECK or SAVE).
However, instead of overwriting the user input via the BAdI you should implement method CHECK ( Closing Check ) where you can validate the user input. If any of your validation fails you can send an error message and set CHANGING parameter CH_FAILED = 'X'. This approach is much more transparent for the user.
NOTE: In order to "send" an error message you need to add the include mm_messages_mac to your implementing class. For an example see class CL_EXM_IM_ME_PROCESS_PO_CUST (should be available on ERP 6.0):
METHOD if_ex_me_process_po_cust~process_item .
DATA: ls_mepoitem TYPE mepoitem,
ls_customer TYPE mepo_badi_exampl,
ls_tbsg TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
* here we check customers data
ls_mepoitem = im_item->get_data( ).
IF ls_mepoitem-loekz EQ 'D'.
* check field badi_afnam
IF ls_customer-badi_afnam IS INITIAL.
mmpur_metafield mmmfd_cust_02.
mmpur_message_forced 'W' 'ME' '083' text-003 '' '' ''.
ENDIF.
ENDIF.
ENDMETHOD. "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM
Regards
Uwe -
User exit or BADI for recruitment
Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
SantoshHi,
<b>Infotype</b>The data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
<b>Function character of step</b>
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
<b>Variable function part</b>
The variable function part, which depends on the indicator for step, can have the following meaning:
<b>P - Plausibility checks</b>
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
<b>I - Maintain infotype record</b>
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
.... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
.... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
<b>W - Default values for new record</b>
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
<b>V - Cross-reference to another step</b>
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
<b>F - Call a routine</b>
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
<b>M - Send a mail</b>
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
<b>ADDITIONAL HINTS</b>
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd -
User exit or BADI for purchase order
Hi,
I want send outbound IDOC for purchase order to 3rd party integration system.
It is too hard to map between standard purchase order IDOC and business object of 3rd party system because the structure of standard purchase order IDOC is so complicated.
So I want bring purchase order data into CBO table when purchase order is created or released. And this data will be inserted CBO IDOC for more simple structure than standard one.
I'm trying to find some of user exit or BADI to insert from standard purchase order to CBO table in the time of purchase order is created or released.
And I'm trying to find another way using message type.
As far as I know it is possible to set sending IDOC in the purchase order message type setting in IMG.
Is anyone who has related situation or know the way to do this?Hi,
I have similar requirement, however the BADI name you mentioned does not exist.
Pls let me know the right one.
Thanks,
Dipak -
User Exits or BADI for Tcode ME51N
Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
ParasHi Paras,
Copy this program and execute. Will get all list of existin g Exits and Badis.
very useful program
Below code will give a list of BADIs for particular transaction.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Reward points if this helps.
hema. -
Hi All,
We are in a situation where in we need to Change the Distribution Channel in the Shipping tab of ME21N transaction.
Previously, the distribution channel is being picked up form the config (SPRO - Shipping data for plant) but before it picks up from the config we need to change it and update the other distribution channel in the PO.
We have tried with most of the User exits and BADIs but all of those are of no use for our requirement, as these user exits and badis are triggered after we click on save button. But we need to change the Distribution channel at the point of determination of Shipping data by the system i.e. before save.
Can any one please help me out with this situation with some User exits or BADIs that are triggered before save button.
Note: The Shipping data is in EKPV table. We need to change the VTWEG field in EKPV.
Thanks in Advance,
Asif Ali KhanAsif,
see these are Exits and BADI for ME21n,
Enhancement/ Business Add-in Description
Enhancement
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
MM06E011 Activate PReq Block
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
M06B0002 Changes to comm. structure for purchase requisition release
M06B0001 Role determination for purchase requisition release
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
Amit. -
Need user exit or BADI for FB60
Hi Guys!!,
I am working on one object which belongs to FB60 transaction. I have to give error message when user enter the ZTERM Value above 45 days for particular vendor group(MSMED).please help out.
Richard.Hi,
Foloowing are available user exits and BADIs for FB60.
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Please find the one suitable to your need.
Hope it will help you.
Regards
Natasha Garg -
Hi
Does somebody knows some user exit or BADI for add validations to FB02 when user changes some position data.
I need to validate some header BKPF (Company, Currency) and detail BSEG (Posting Key, Account Bank) data when change the position.
Does somebody knows one user exit or Badi wich i can use to do it ?
Thanks
FrankThanks for your answers.
I need to make validations for send error messages and i can not use FI Validations and Sustitutions because i send several differents messages and wuold need N steps (one step for each message).
The enhancement points called in CHANGE_TO_MODIFY are executed when ok-code is 'CHAE' that is when the user calls FB03 and then change to modify mode for make changes like if he goes to FB02 , but these enhancements are no executed any more when the data changes are made and user press save.
I already found some enhancement executed just before data saving (it's in FORM belegsummen_pruefen) so i make the validation and send the error message , but when error message appears the screen get protected so the user can not change any screen field for make the data corrections.
Best Regards
Frank
Maybe you are looking for
-
Link to the same page in javascript
Hi i am developing tables in java script. If i click the row in the table i will get clicked row in the blow function.If i want to call to a graph which should be displayed in the same page how to do? function(event, column, row){ }
-
Adobe Drive not connecting to hello world sample launched via Eclipse
I'm trying to get the hello world sample running with Drive SDK 5. I got: Adobe Drive 5.0.1 AdobeDriveSDK-5.0.0.398770.zip latest Java JRE 1.6 Eclipes 4.3.1 (Kepler SR 1) Windows 7 64bit I configured the hello world project as described in the gettin
-
NO iPhoto Library showing in Desktop and Screensaver Menu in SL
Hi experts, I have experienced a problem after I updated to SL last night. I made a fresh install of both SL and iLife 09 on my mbp unibody late 2008. Afterwards, I replaced the my fresh iphoto library simply with my old iphoto 09 library from time m
-
Help need on Validations in inline-popup task flow
Hi, I create a adf application, which refer ready only table and in toolbar, there are some button, which used to insert and edit records. For insert and edit i used a edit.jspx page which come as a inline poup in taskflow. In inline popup i used a b
-
TS1424 Error -1202, I am not able to complete a purchase after entering security information
When I try to purchase music, i keep getting this error and it will not finish the purchase. Anyone have a fix?