User exit or Badi for ME21N transaction
Hi Gurus,
In ME21N tranasaction i need to make the field 'Free Item' ( checkbox ) as a mandatory field at item over view level for specific document types. so that user can't save the PO order with out checking the checkbox.
So is there any exit or badi to achieve the functionality.
Thanks in advance.
Regards,
krisc.
Hi gurus,
Thank you very much for your replies.
I resolved this issue my self.
Thanks,
krisc.
Similar Messages
-
User exit or badi for me52n transaction.
Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards -
How to find the list of USER-EXITS or BADI for the transaction ABSO
Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanarajHi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE. -
Hi All,
We are in a situation where in we need to Change the Distribution Channel in the Shipping tab of ME21N transaction.
Previously, the distribution channel is being picked up form the config (SPRO - Shipping data for plant) but before it picks up from the config we need to change it and update the other distribution channel in the PO.
We have tried with most of the User exits and BADIs but all of those are of no use for our requirement, as these user exits and badis are triggered after we click on save button. But we need to change the Distribution channel at the point of determination of Shipping data by the system i.e. before save.
Can any one please help me out with this situation with some User exits or BADIs that are triggered before save button.
Note: The Shipping data is in EKPV table. We need to change the VTWEG field in EKPV.
Thanks in Advance,
Asif Ali KhanAsif,
see these are Exits and BADI for ME21n,
Enhancement/ Business Add-in Description
Enhancement
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
MM06E011 Activate PReq Block
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
M06B0002 Changes to comm. structure for purchase requisition release
M06B0001 Role determination for purchase requisition release
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
Amit. -
User Exit OR Badi for MK01 transaction (used for saving vendor amster data)
Hi All,
I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit 'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
Looking forward to your advise and thanks in advance.
Best Regards,
MamtaHi ,
I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
so problem is solved now
Thanks,
Mamta -
User exit or BADI for F110 transaction
Hello, i need a user exit or badi for the F110 transaction with the objective to shoot workflow of approval of payment proposal.
Hi Mathias,
Welcome to SDN.
Please check this link for sample code to find user exits and BADIs for a given transaction code.
User Exit
Hope this will help.
Regards,
Ferry Lianto -
User Exit or Badi for CN60 transaction
Hi
Can anyone tell me the user exits or Badis for Tcode CN60.
i need to Include the Comments field for the activities from CN22.soi would like to know is there any userexit for CN60.
Thanks
SowjanyaHi Sowjanya
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
reward points to all helpful answers
kiran.M -
User Exit / Enhacement / BADI for MB1B transaction
Hi all,
Movement type -311
Plant 1004
Storage Location - XXX
Now reuirement is like during Transfer posting when user provides Receving Location and Material and Press Enter
batch and qunatity should be automatically populated based on some Selection.
I checked BADI but no BADI is available when user press Enter.
Please suggest me with Enhancement Spot , User Exit for this requirement.\
Thanks in advance.
Harsharandeep SinghHi Harsha,
Try these User Exits/Enhancements.
Following are the BADIs for MB1B transaction:
ARC_MM_MATBEL_CHECK Check Add-On-Specific Criteria for MM_MATBEL
ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_LMBMBU04 posting of gr
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI BAdIs when Creating a Material Document
MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
Following are the user exit for the same:
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
Vishnu. -
User-Exit or BADI for CS02 transaction
Dear Sir,
In Tcode CS02 , we want to restrict the users so that "VALID FROM DATE" is not in the past . I can not use Transaction Variant and need to validate the date either thru User-Exit or BADI .
I tried to use User-Exit PCSD0005 / PCSD0007 , but none of them is able to resolve the problem .
I request SAP Gurus to kindly help me on this problem pl .
Rgds
Sonia AgarwalhI,
Use BOM_EXIT badi ....method START_SCREEN_CHECK in which ....under importing parameters you will see the valid-from date which you can validate...
Thanks,
Shailaja Ainala. -
User exit or BADI for PPOME transaction
Hi all,
I need to know is there any User exit or Badi or Enhancement spot is available while saving the PPOME transaction in HR.Hi,
This is the BADI HROM_EXP_PATH
Thanks,
Shailaja Ainala. -
User Exit or Badi for VF02 Transaction
Hi Friends,
I need to do Billing Date validation while chnging the Billing Document. so can u plz provide me some on the user exit which will get triggered for VF02 tran.
I checked with some of the exit like,
V61A0001
V60P0001
V60A0001
V05N0001
V05I0001
SDVFX011
SDVFX010
SDVFX009
SDVFX008
SDVFX007
SDVFX006
SDVFX005
SDVFX004
SDVFX003
SDVFX002
SDVFX001 but nothing seems to be triggering for me. Plz help me...Hi Please find the below list of userexits.
Exit Name Description (VF02)
J_3RSINV Export sales
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
LV60A001 vf -
Stop standard process in user exit (or badi) for ME21N.
Hello,
I have implemented a user exit (and also a BADI) for transaction code ME21N.
The user exit is executed before saving the purchase order.
In my user exit, I just check data and if they are wrong, I just want to stop the process displaying an error message.
So, I've just used 'MESSAGE Exxx(xxxx)'.
The problem is that the standard process catch the error and treat it in stead of stopping. The standard process treats the error and proposes the user to chose if he(she) wants to continue or to stop (within a popup).
I just want to stop the process, displaying a error message.
If someone has a idea about how I can realise that, please let me know.
Giuseppe,Which Exit/Badi did you implement? And Error message should normally stop the process. Maybe you have implemented the wrong exit.
-
User exit or BADI for ME22N transaction (please read my requirement)
In me22n transaction when i change a PO Delivery date for any line item and click on save The field latest GR date MEPO1313-LEWED in DELIVERY tab below should display date as per my requirement i.e (delivery date + 90 days)
What uerexit is to be used else if BADI is used pleasee provide me step by step guide as i have never used vadi
IT is urgent. plz helopp.Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
Execute the report, give the transaction you want to find user exit, and query.
<b>BADI</b>
To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable <b>exit_name.</b> It would show the available badi's.
Please do reward if useful
Regards
Dinesh -
User exit or badI for COR1 transaction
Hi Experts,
Is there any user exit, badi or Enhancement point to assign our own number range for Process order based on Plant. I searched thru all available userexits for COR1 but didnt able to find the exact one, please suggest in this regard...
Thanks.............Hi,
The following r the userexits.
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
Regards,
Deepthi. -
Need an user exit or BADI for CJ20n Transaction ,
Dear Friends,
In CJ20N , we have a Structure with Project definition>Top level wbs element>Network Header-->Network Activities
For Network Activity it has main screen with one of the Tab named Necessary Fields. It has a subscreen of Dates having Forecast Start and Forecast Finish Dates(Forecast start Date/ Forecast End date ). The dates format is DD.MM.YYYY. Now we want the Time format 00:00 to be added besides the Date format.
Can anyone suggest if there is any user enhancement (screen exit ) or Badi can be implemented .
Thanks & Regards
Ramakrishna.KPlese check if enhancement CNEX0006 can be used for your requirement.
Regards,
Shyam
Maybe you are looking for
-
How to run command line argument programe
Hi guys, I am doing pass command line argument programe in java but I don't know how to run this programe. Path for this programe in my my computer is C:\Users\Desktop\Mainjava\mycode\CommandProgjava* {code/} public class CommandProg public static vo
-
Changing which files are opened automatically when opening a solution
When I open a solution, VS automatically opens various files in the editor. There must be a configuration setting somewhere in the solution that tells VS which files to open but I'm unable to find that setting. Anyone know where this setting can b
-
hello, is there a way to redact a word or item from a pdf using adobe pro X the same way you can if you convert a word doc using pro X on a pc?
-
Reset commitments for expected delivery costs
Hi guru's, after i have implemented note 733733 I finally got SAP to reset commitments after setting the 'Final Invoice' indicator in the PO. Only it does not reset the commitment for any expected delivery costs that occur on the purchase order. Can
-
Printing Wirelessly to a printer connected to a Windows computer.
Hi, First off, I know that this question has been asked a million times before, but I've read all of the other threads and haven't been able to find a solution that has worked for me yet. I've gotten it to work for my Windows laptop, but not for my M