User exit or badi for saving the data in mm01

Hi All,
I added one custom screen in mm01 using SPRO ,as well as i added 2 new fields in makt table using Append statement, now the problem is am not able to save the custom screen data in standard makt table can any one help me in this ,tell me which Badi or Exit is useful for this requirement.
Thanks,
Priyanka
Edited by: priyankanukala on Feb 21, 2012 7:55 AM
Edited by: priyankanukala on Feb 21, 2012 8:01 AM
Edited by: priyankanukala on Feb 21, 2012 8:04 AM

Hi
You don't need them. See Note 44410 - Integrating cust.-specific fields in matl master for further information, and copy the code for PAI event in your custom dynpro. You need something similar to this:
process after input.
*coding......
chain.
    field: mara-zzfield1,
           mara-zzfield2.
    module checks_on_zz on chain-request.
endchain.
* coding .......
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Feb 21, 2012 9:26 AM

Similar Messages

User Exit or BADI for catch the document number after saving the document

Hi ,
I am working on data conversion where Document number(BELNR),BKPF and BSEG data should
transfer to my Z table(Containes fileds of BKPF and BSEG) after SAVE the document related to
Tcodes F-01 , F-22 , F-28 , F-43 , FB01 , FB02, FB60 ) . It need to go through by any user-exit or
BADI.So Could you please suggest me any User exit or BADI ASAP.
Waiting for reply.
Thanks
Lakshmi

You should use BTE (Business transaction event). This concept is used especially for FI related enhancements...
Study this document to know how to use BTE
http://www.todoabap.com.ar/archives/FI%20Enhancement%20Technique%20-%20How-To-Guide%20on%20the%20Usage%20of%20Business%20Transaction%20Events%20(BTE).pdf
Let me know if you face any specific issues..

User exit or BADI for determining the output type inme21n orme22n

hi all,
i have used the user exit 'exit_sapmm06e_012', it is getting triggered in me22n, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation. i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do antone know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh.

Hi Santosh,
Why not continue the other post ?
Anyway, i am not sure to understand your requirement.
Do you want to check that vendor email exist and issue a message only if email is not available ?
Kind regards,
Yann

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

User exit / substiution / badi for changing baseline date

Dear Experts ,
                       I have a requirement to change the base line date of residual document created in F-28 / F-32 to the base line date of original document getting partially cleared .
I have explored the option of substitution but it doesnt work as field ZBLDT is not available for substitution there .
Please let me know any BADI / Exit which can perform this change of baseline date .
thanks in advance

Hi Milind,
Following are the user-exits for F-32 :
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
I hope this will help you.
Regards,
Nitin.

User Exit or BADI for COR1/COR2

Dear Experts,
Can you please tell me if we have any user-exit or BADI for chaning the value of the technical completion date field
i.e. AUFK-IDAT2 while saving the Process Order in COR1 or COR2?
Thanks,
Praveen

Hi Praveen,
Implement the customer exit EXIT_SAPLCOKO_006 in enhancement
PPCO0020 Process order: Display/change order header data
This is only importing one field I_AUFNR.
but try the logic below.
data: lv_fnam type char16 value '(SAPLCOKO)caufvd'.
field-symbols : <fs_caufvd> type caufvd.
your checks for changing the field IDAT2 (Technical completion date).
Try to change <fs_caufvd>-IDAT2 field value.
Regards,
Dwarakanath.S

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

User Exit Or Badi for Framework Release PO

Anyone could tell me about any user exit or BADI for storing the calculated value in Frameork order.
Since it is storing the GNETW in CEKKO and that is used in releasing procedure.
First of all i want to calculate the total price according to srat date and end date and then only for framework order put that value in CEKKO-KTWRT field.
Please Help and suggest some thing about this.
Thanks & Regards,
Nitin Malhotra

Hi,
Check the following PDF .
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
May be useful to you.
Regards
Sachin

User Exit OR Badi for MK01 transaction (used for saving vendor amster data)

Hi All,
I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit 'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
Looking forward to your advise and thanks in advance.
Best Regards,
Mamta

Hi ,
I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
so problem is solved now
Thanks,
Mamta

How to find the list of USER-EXITS or BADI for the transaction ABSO

Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanaraj

Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.

User exit or BADI while saving purchase order

Hello,
I want to use an user exit or BADI while saving of purchase order. The objective is to check the material group of the line item while saving. We don´t want to allow to save purchase orders for one material group.
Can you please guide me.
Thanks
Srinivasan

Hi
The Business Add-In (BAdI) ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order on an individual basis.
You can thus influence the dialog transactions ME21N, ME22N, ME23N, and ME29N, and the BAPIs BAPI_PO_CREATE1 and BAPI_PO_CHANGE.
Typical applications for this BAdI include:
Processing of own objects
Processing of additional data on standard objects
Implementation of additional checks and derivationsChange of data in standard fields
Change in field selection
you can use this BADI for checking the material group
Thanks & Regards
Kishore

User exit or BADI after saving in ML81N

Hi,
I have created a Custom tab at header level in ML81N. In this tab the user enters the data which is to be stored in Ztables once the entry sheet is successfully saved. I am searching for BADI or user exits for saving the data. Can anyone tell me user exit or BADI which is triggered after saving the data?
Thanks in advance.

Hi Poorvi,
Please get your results from the search.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=userExitBadiML81N

Stop standard process in user exit (or badi) for ME21N.

Hello,
I have implemented a user exit (and also a BADI) for transaction code ME21N.
The user exit is executed before saving the purchase order.
In my user exit, I just check data and if they are wrong, I just want to stop the process displaying an error message.
So, I've just used 'MESSAGE Exxx(xxxx)'.
The problem is that the standard process catch the error and treat it in stead of stopping. The standard process treats the error and proposes the user to chose if he(she) wants to continue or to stop (within a popup).
I just want to stop the process, displaying a error message.
If someone has a idea about how I can realise that, please let me know.
Giuseppe,

Which Exit/Badi did you implement? And Error message should normally stop the process. Maybe you have implemented the wrong exit.

User Exit or BADi for FB02

Hi
Does somebody knows some user exit or BADI for add validations to FB02 when user changes some position data.
I need to validate some header BKPF (Company, Currency) and detail BSEG (Posting Key, Account Bank) data when change the position.
Does somebody knows one user exit or Badi wich i can use to do it ?
Thanks
Frank

Thanks for your answers.
I need to make validations for send error messages and i can not use FI Validations and Sustitutions because i send several differents messages and wuold need N steps (one step for each message).
The enhancement points called in CHANGE_TO_MODIFY are executed when ok-code is 'CHAE' that is when the user calls FB03 and then change to modify mode for make changes like if he goes to FB02 , but these enhancements are no executed any more when the data changes are made and user press save.
I already found some enhancement executed just before data saving (it's in FORM belegsummen_pruefen) so i make the validation and send the error message , but when error message appears the screen get protected so the user can not change any screen field for make the data corrections.
Best Regards
Frank

User Exit or Badi for MIRO

Hi
I need add some validations to data entry in MIRO for send their respective error messages and stop data saving.
Does somebody knows some User Exit or Badi for make validations in MIRO ?
Regards
Frank

Hi,
you can use badi MRM_HEADER_CHECK. In order to put error message you can use function module
PROT_FILL.
* If there is any error do not allow posting
    DATA: gt_errtab    TYPE TABLE OF mrm_errprot,
          gs_errtab    TYPE mrm_errprot.
    CONSTANTS:     c_errprot(23)   TYPE c VALUE '(SAPLMRMF)TAB_ERRPROT[]'.
    FIELD-SYMBOLS: <fs_errprotj_dt> TYPE table.
    ASSIGN (c_errprot) TO <fs_errprotj_dt>.
    REFRESH gt_errtab[].
    gt_errtab[] = <fs_errprotj_dt>[].
    IF NOT gt_errtab[] IS INITIAL.
      READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'.
      IF sy-subrc = 0.
        DATA: c_okqx(17)   TYPE c VALUE '(SAPLMR1M)OK-CODE'.
        FIELD-SYMBOLS: <fs_okqx> TYPE ANY.
        ASSIGN (c_okqx) TO <fs_okqx>.
        CASE <fs_okqx>.
          WHEN 'BU'. "POST
* This is optional: you can either search for a particular message or
* do not allow any error message
* Here search for the message triggered in badi INVOICE UPDATE
            READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'
            msgid = 'ZXX' msgno = '030'.
            IF sy-subrc = 0.
              CLEAR <fs_okqx>.
              MESSAGE s030(zxx). "While errors exist document will not be posted
            ENDIF.
        ENDCASE.
      ENDIF.
    ENDIF.
This is used to give error message in case before posting the document.
KR Jaideep,

User exit or badi for saving the data in mm01

Similar Messages

Maybe you are looking for