User exit or Badi to add custom fields in selection screen of tcode CATS_AP
Hi Guys,
I want to add a custom field to the selection screen of report RCATS_APPROVE_ACTIVITIES (tcode CATS_APPR_LITE).
I also want to display filtered by this custom fields. Please let me know the user-exit (prefebly) or BADI.
I will appreciate if somebody can share the steps.
Thanks,
Hi,
Yes there is, the BADI name is CATS_REPORTING.
It can be views in transaction SE17.
thanks.
JB
Similar Messages
-
USER EXIT or BADI to add custom fields in QI06 Output
Hi Gurus,
I have tried to find out Suitable User Exit / BADI to add custom fields in QI06 ( Collective Maintenance Display) output. but in vain..
We found USer Exits -QLIB0001/QLIB0002 .
Badi- QB_PLAN_SELECTION_P, QB_Q_INFO_RECORD,QB_QM_SYSTEM_COMPARE,ALV_SWITCH_GRID_LIST
which are not useful.
So need your Suggestions / help in finding out suitable exit/ BADI.
Thanks in Advance,
Lalit.Hi,
You can use the function module SXV_GET_CLIF_BY_NAME to find more BADI. Set a break point and run QI06 until the end.
I hope this helps you
Regards
Eduardo -
Add custom fields on selection screen and ouput in Transaction QM11
Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well. -
Adding customer field to selection screen of RFKORD11 - Customer Statement Printing Program:
Hello,
We are required to add an important customer field to selection screen of customer
statement printing program: RFKORD11 for our South African branch.
Please advise us regarding this matter,
is there a proper user-exit or a repair is needed?
Kind Regards.Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better . -
Transaction DP97: Need to add 2 fields on selection screen...
Hi,
I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
2) where to add programming logic for this
Thanks in advance,
MinalHi,
Go to program RVPKMASS97.
Go inside INCLUDE rvpkmasspar.
(When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
Click on spiral icon there on the tool bar.
right click on the '
ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
now you can declare ur fields in this implementation.
After declaring save it and activate it.
Now go back to ur txn and run. you are able to see the custom fields on the screen.
Reward me points if it is helpful.
I think it will help you out.
Thanks,
Prasanna -
User Exit to add custom field in Component Screen
Hi Friends,
I searched alot but could find exit to add custom field or tab in material component detail screen for SAP 4.7. Please let me know if there is any exit or workaround possible.
Thanks,
RajBADI is available to create custom field in material component , but it is available as of ECC 6.0 EHP3 , not sure about 4.7
-
User exit or BAdI name for Netprice field in PO
Hi All,
Can you please give me the name of the BADI or user exit to update the net price field in automatic creation of PO ME59N.
In this case I am creating the PO based on a PR the net price field has to pick the price from the Sales Order.
Please help me out in this.
Thanks,
Praveen<b>User-Exits</b>
MM06E010
MM06E009
MM06E008
MM06E007
MM06E005
MM06E004
MM06E003
MM06E001
MEVME001
MM06E011
MEQUERY1
MRFLB001
MMFAB001
MMDA0001
MMAL0004
MMAL0003
MMAL0002
MMAL0001
M06B0002
M06B0001
LWSUS001
LMEXF001
LMEQR001
LMELA010
LMELA002
LMEDR001
AMPL0001
MELAB001
LMELA002
LMEDR001
AMPL0001
MELAB001
MEFLD004
MEETA001
ME590001
M06E0005
M06B0003
M06B0004
M06B0005
M06E0004
<b>BADIs</b>
ME_HOLD_PO
ME_CIN_MM06EFKO
ME_CIN_LEINRF2V
ME_CIN_LEINRF2R
Greetings,
Blag. -
Urgent!!!!User exit or BADI to change INSMK field in ME27 transaction
Hi ,
Can anybody help me to find the user exit or badi for ME27 transaction. I need to change the field INSMK to BLOCKED.
I tried EXIT_SAPMM06E_012 ,
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
by adding my code but nothing worked. Please help me in this.
Points will be rewarded if helpful.
Thanks in Advance.hai Leela,
Just Go To SE84
Give The PRogram Name Or PAckage name In Which ME22N is present.
Then Click On Display
Then Click On Enhancements
Then U will Get USer Exits Aswell As BAdis.
Ok IF helpful Reward.
And Then Use Suitable One.
Regards
Eshwar -
User-exit or BADI For ME31L Standard Fields Change
Hi all,
Any one knows user-exit or BADI to change the standard fields when using ME31L (Create SA)? Like Currency, Tax code.... Many Thanks.It seems I have to modify the standard program....In ECC 6.0, there is a BADI : Processing Options for Enjoy Outline Agreement, but it seems not work for ME31L...
-
Add Custom field to standard screen with table control
Hello,
I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
Do i need to write any code?
I'm new to ABAP so could you please give a detailed explanation.
Also, do i need to change the 'fixed columns' field in the table control?
Regards,
Monica.hi,
1) find the screen
2) add new fields to the screen
3) program PBO and PAI
regards,
Wojciech -
IW 28, customer fields in selection screen
Hello,
we have some costumer fields in table qmel. I would like to use these fields in transaction IW 28 as selection fields.
Is this possible?
regards
stefanHi,
You can add the filed in selection screen.
find the enhancement points for selection screen in program.
and same way find enhancement point for select query in program.
For example:
The field revnr is added in selection screen like we can add custom filed also.
ENHANCEMENT 4 DIMP_GENERAL_RIQMEL20. "active version
SELECT-OPTIONS: revnr FOR viqmelst-revnr.
ENDENHANCEMENT.
second: select query is also given in enhancement point, since we can modify the enhancement point.
ENHANCEMENT 2 DIMP_GENERAL_RIQMEL20. "active version
SELECT (g_selfields_tab) FROM (g_viewname)
INTO CORRESPONDING FIELDS OF TABLE lt_viqmel_iflos
WHERE qmnum IN qmnum
AND iwerk IN iwerk
AND tplnr IN strno
AND swerk IN swerk
AND kostl IN kostl
AND abckz IN abckz
AND gsber IN gsber
AND anlnr IN anlnr
AND stort IN stort
AND msgrp IN msgrp
AND eqfnr IN eqfnr
AND beber IN beber
AND ingrp IN ingrp
AND equnr IN equnr
AND matnr IN matnr
AND serialnr IN serialnr
AND deviceid IN deviceid
AND bautl IN bautl
AND msaus IN msaus
AND ausvn IN ausvn
AND ausbs IN ausbs
AND auztv IN auztv
AND auztb IN auztb
AND btpln IN btpln
AND bequi IN bequi
AND auswk IN auswk
AND verfv IN verfv
AND verfn IN verfn
AND verfm IN verfm
AND anlzv IN anlzv
AND anlzn IN anlzn
AND anlze IN anlze
AND inspk IN inspk
AND datan IN datan
AND qmart IN qmart
AND bukrs IN bukrs
AND priok IN priok
AND ernam IN ernam
AND erdat IN erdat
AND aenam IN aenam
AND aedat IN aedat
AND mzeit IN mzeit
AND qmnam IN qmnam
AND strmn IN strmn
AND ltrmn IN ltrmn
AND aufnr IN aufnr
AND kunum IN kunum
AND vbeln IN vbeln
AND kdauf IN kdauf
AND kdpos IN kdpos
AND bstnk IN bstnk
AND bstdk IN bstdk
AND qmdab IN qmdab
AND bezdt IN bezdt
AND rbnr IN rbnr
AND qmdat IN gr_date
AND ( kzloesch = space OR
kzloesch IS NULL )
AND qmart IN i_qmart
AND vkorg IN vkorg
AND vtweg IN vtweg
AND spart IN spart
AND auszt IN i_auszt
AND arbpl IN i_arbpl
AND qmgrp IN qmgrp
AND qmcod IN qmcod
AND warpl IN warpl
AND wapos IN wapos
AND revnr IN revnr
AND owner IN i_owner
AND phase IN gr_phase.
ENDENHANCEMENT. -
BADI or User exit for FB50 to update custom field in table COEP
Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEPHi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB -
Required BADI to add custom fields in the Basic Data screen in MM01
Hi,
I got a requirement like this. I have to add 3 custom fields and one button in the standard transaction i.e., MM01, MM02, MM03. There is one field like producu heirarchy in the Basic Data in that field i will enter some values i want to display the description of those values in the corresponding field for that i need to create 4 custom field. We can create this by breaking the Developer Access Key but instead of that can i get any BADI to add the our custom code to display those fields. I want to add those fields in Basic Data View in the transaction MM01, MM02, MM03. I serached in SPRO but i couldn't find the respective BADI.
Pls suggest if any BADI is there for this.
Thanks in advance.Hi,
The list of BADI's are as under
WRF_DISCONT_PARAMS_I BAdI: Parameters in Fashion Discontinuation
WRF_DISCONT_FACT_E BAdI: Follow-Up Actions in Discontinuation
WRF_DISCONT_CHECKS_I BAdI: Scope of Check in Material Reorganization
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD BAdI for Article Hierarchy Connection
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR Modification-Free Archiving Enhancement of MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS Check Material for Use in iPPE
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD Integration of New Objects in Material or Article Maste
BADI_MATERIAL_CHECK Enhanced Checks for Material Master Tables
BADI_GTIN_VARIANT User Exit for Customer-Specific GTIN Variant Check
BADI_EAN_SYSTEMATIC BAdI for Internal Control of EAN Logic
Regards,
Surinder -
USER EXIT or BADI to update the field in trx. ME41
Hi guys,
My requeriments is update the field EKKO SUBMI of record when the trx. ME41 but can not find how to do it, the BADI ME_PROCESS_CUST the method POST not allowed me to meet user and not allow the update the field.
Please help ...
Thanks.Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph -
BAdI: ME_GUI_PO_CUST add customer field to item level
Hi Experts,
I want to add a customer field to PO item level, how to do that? the functional consultant told me to first implement the BAdI: ME_PROCESS_PO_CUST before I can use BAdI: ME_GUI_PO_CUST, can anyone show me the procedure on how to implement this? thanks in advance.
Kind regards
DawsonHi Dawson,
Those BADIs are having good documentation and sample code. Once gone through the documentation, you can refer below thread.
Re: ME_GUI_PO_CUST & ME_PROCESS_PO_CUST - ME21N/ME22N/ME23N
Reddy
Maybe you are looking for
-
Missing response message in Idoc - WS scenario
Hello I 'm missing a response message in the follwing scenario: Idoc-> XI -> Web service (SOAP) A Matmas idoc is sent from R/3 to XI. In XI the Idoc is mapped to a SOAP message and sent to a web service. The Message Interface for the SOAP call is syn
-
MSA 4.0 SP8 : Campaign description not updated in real time while saving?
with reference to this thread : refresh/update a list , I prefered creating my own instead of upping the older one So the problem deals with data refreshing, or data updating into the objects : When creating a campaign, after saving, the campaign des
-
Problem writing to serial port
Hi All, I am very new to LabVIEW (just a couple of months). I need to communicate with a serial port of an Advanced Energy RF generator (Ovation) serial port (AE Bus) The manual talks about little endian conversion, CSR and checksum that I just can't
-
DRM video playback - HELP PLEASE
I have searched and searched and searched online but cant find anything and from what I can Adobe doesnt have any examples, but I am building an AIR desktop video player application and want to be able to play videos with DRM such as bought iTunes mo
-
Api POI read and replace my word document with java
Hi Everyone I�d like to know if someone has a piece of code reading a word document with api POI to send me? I need read replace the word document wiht java j2ee. Thanks