User exit or BADI to change the delivery date in ME51N transaction

Hi Gurus,
I need a user exit or a BADI where I can change the delivery date in the item overview tab for each material. I need to calculate the date according the vendor contact details.
Please let me know if there is any BADI or a user exit for the same
Thanks a lot!!!
Sharath

quick search for exits/badis: get package name and supply it into se80
or
se15
thanq

Similar Messages

User Exit or BADI to change the product cost

Hi All,
My requirement is to change the product cost when the costing engine is running via ck11n or ck40n. Iam looking for user exits and BADI's for this requirement.
I did look into the BADI DATA_EXTENSION_CK but this particular BADI does not have export or changing parameters. Can anyone suggest any user exit or BADI's for this requirement. I also looked into other BADI's like
CK_KALAMATCON2_CI
COSTINGRUN_CK
COST_APPORTION_CK
CO_PROD_COSTING_CK
DYNPRO_EXTENSION_CK
ORDER_COSTING_CK
QUANTITY_STRUCT_CK
SUR_STOCK_TRANSF_CK
VALUATION_CK
But none of them served the purpose. Plz help...Thanks in advance...
Regards,
Nirmal.

Hi,
Check followinf enhancement spots:
CO_PROD_COSTING_CK              Cost Management for Joint Products (Costing, Target Costs)
COSTINGRUN_CK                         Edit Costing Run
ES_CAL2TYPE                             ES_CAL2TYPE
ES_LCK40VWS
ES_SAPLCK00                            es_SAPLCK00
ES_SAPLCK01                            es_SAPLCK01
ES_SAPLCK04                            SAPLCK04
ES_SAPLCK2U                            es_saplck2u
ES_SAPLCK36                            es_saplck36
ES_SAPLCKCC02                        ES_SAPLCKCC02
ES_SAPLCKDI                             ES_SAPLCKDI
ES_SAPLCKKK
ES_SAPRCKCU
ESC_CL_COSTING_PERSISTENCE
LCKDIO2M_01                             ES_SAPLCKDI
LCKDIO2T_01                              ES_SAPLCKDI
ORDER_COSTING_CK                 Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK               Enables Quantity/Structure Changes in Costing
VALUATION_CK                           BAdI for Valuation in Product Costing
Hope this may be useful..
Regards,
Prashant

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

User exit/BADi to change the header text in MIRO transaction

Hi all,
I am searching user exit or badi to change the header text in MIRO transaction.
My requirement is, before post the invoice I need to populate the vendor name in Header text field(MIRO -> Details tab -> header text field ). I have tried all the user exits and BADi's related to MIRO. Doesn't work. If anybody knows please share.
Thanks,
Pranav

Try BADI INVOICE_UPDATE.
If you are in system version is ECC 6.0, you can find out a Enhancement SPOT (ES_SAPLMRMC) under Function module MRM_FINAL_CHECK, which can be used to perform this requirement
Hope this helps.
Thanks,
Balaji
Edited by: Balaji Ganapathiraman on Mar 14, 2008 4:43 PM

How to cancel the second ATP after changing the delivery date in the SO

Hello,
our solution creates automaticly a production order accorting to sales order.
The system calcule ATP for each items at the creation of the sale order.
Sometime, we change the delivery date on the scheduled line and SAP do another ATP. If the composants are not available we get an TSUP status on the order production.
How can we cancel the second ATP ?
Is it possible to cancel it when we change delivery date ?
Thanks
Regards
Pierre

I think its not possible to skip the atp during change of the sales order. All these determinations will trigger before saving the order
regards,
Ramana

User exit or badi neede for the vl02

Hi All,
My user will do the GOODS ISSUE Through the VL02 ,So the shelflife expiry date will perform at this time,it will give the error message if the Batch shelf life expiredate is not matching with material master shelflife expriry date,but my user wants to skip this check for a particular movement type , So to solve this issue can any one tell which enhancement technique is suitable to solve this issue,if that is user-exit or BADI Please could you give that user-exit/BADI Name .
Thanks in advance..
SRIHASA

you can use these many badi for user exist in vl02:
Enhancement/ Business Add-in            Description
Enhancement
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
Business Add-in
DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
DELIVERY_PUBLISH                        Announcement of delivery data during database update

User Exit or BADI to update the service order in R/3

Hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1. Planner Group
2. PMActType Plant maintenance activity type
3. Cost/Profit Centre
4. WBS element
5. Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ramana

Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph

User Exit or BADI to update the service order

hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1.     Planner Group
2.     PMActType Plant maintenance activity type
3.     Cost/Profit Centre
4.     WBS element
5.     Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ram
Message was edited by:
        RAMANA MYLAPALLI

Best Possible way is.
go to se24 -> type in CL_EXITHANDLER -> Go to get_instance method.
Put a breakpoint on CALL METHOD cl_exithandler=>get_class_name_by_interface.
Now run the transaction and check which all BADI and user exits are invoked when u call the transaction.
Idenitfy the BADI which can be useful to you.
Reward if u find it useful.
Thanks
Kartavya

User exit or BADI available for the CAPP in CA03.

Hi,
I have a requirement to populate the standard CAPP values to the work center activities of the routing only when all the activities are having a blank value.Please see the below paragraph for better understanding.
Currently in SAP when executing CAPP for a work center of the routing it over writes the existing values populated on the routing for the setup,labor,standard labor,man occupation,machine occupationetc whether the values are blank or not. An enhancement needs to be made to only populate operations standards when all the values are blank.
If routing is not populated with setup, machine, labor standards, man occupation, machine occupation and work center is setup for default standards in CAPP, then run the CAPP process to apply standards from work center zcappstds table. The program that is run to apply these standards currently is SAPLCETO. Potentially ca96 and the batch process that updates the material master RCPMAU01 will have to be adjusted as well.
Please help me if anybody knows the user exit/Badi for this requirement.Please reply me soon this is an urgent requirement
thanks in advance,
Samyuktha.

I dont have details abt exact user Exit or badi which will suit ur requirement. But below info will give you the way to find out the same.
Have a look at below link,
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Best Regards,
Vibha
*Please mark all the helpful answers

Urgent!!!!User exit or BADI to change INSMK field in ME27 transaction

Hi ,
Can anybody help me to find the user exit or badi for ME27 transaction. I need to change the field INSMK to BLOCKED.
I tried EXIT_SAPMM06E_012 ,
         EXIT_SAPMM06E_016
         EXIT_SAPMM06E_017
by adding my code but nothing worked. Please help me in this.
Points will be rewarded if helpful.
Thanks in Advance.

hai   Leela,
Just Go To SE84
Give The PRogram Name Or PAckage name In Which ME22N is present.
Then Click On Display
Then Click On Enhancements
Then U will Get USer Exits Aswell As BAdis.
Ok IF helpful Reward.
And Then Use Suitable One.
Regards
Eshwar

User exit or BADI for determining the output type inme21n orme22n

hi all,
i have used the user exit 'exit_sapmm06e_012', it is getting triggered in me22n, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation. i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do antone know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh.

Hi Santosh,
Why not continue the other post ?
Anyway, i am not sure to understand your requirement.
Do you want to check that vendor email exist and issue a message only if email is not available ?
Kind regards,
Yann

User Exit or BADI to get the Total Tax Amount in a New PO (ME21M)

Hi,
Can somebody tell me any user exit or BADI I can look at to get the total Tax amount of a new PO, after user press SAVE button and before data is written to tables (EKKO, EKPO etc).
Key requirement here is AFTER save button is pressed and before data is written to tables. I want to do some validation before data goes in the table.
Thanks in advance. Please help me.

Dear MiniSap..
Maybe you can use function PRICING or CALCUALTE_TAX_ITEM .
Best regards,
Ale

User Exit or BADI for catch the document number after saving the document

Hi ,
I am working on data conversion where Document number(BELNR),BKPF and BSEG data should
transfer to my Z table(Containes fileds of BKPF and BSEG) after SAVE the document related to
Tcodes F-01 , F-22 , F-28 , F-43 , FB01 , FB02, FB60 ) . It need to go through by any user-exit or
BADI.So Could you please suggest me any User exit or BADI ASAP.
Waiting for reply.
Thanks
Lakshmi

You should use BTE (Business transaction event). This concept is used especially for FI related enhancements...
Study this document to know how to use BTE
http://www.todoabap.com.ar/archives/FI%20Enhancement%20Technique%20-%20How-To-Guide%20on%20the%20Usage%20of%20Business%20Transaction%20Events%20(BTE).pdf
Let me know if you face any specific issues..

User-Exit or Badi for dangerous goods - master data

Is there any user-exit or BADI we can use while changing or saving dangerous goods?
We want to do a copy on other dangerous goods immediately after the change or creation of the dangerous goods master data.
But I can't find an user-exit which can be used before the changes are saved.
Can anybody help?
Thanks!

Hi,
Please check SAP enhancement DG100001
You can use this SAP enhancement to define a customer exit to write change documents for dangerous goods master data and packaging data.
The customer exit is in the function group XD10. It is called from the function DG10_CHANGE_DOC_USER_EXIT.
If the system does not find a customer exit, a standard document description is called. This is stored in the include LDG1NU03
Hope this will solve your problem
Regards,
Keshav

Custom exit or badi for changing the user fields in operation of process order

Hi all
    I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
    I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
    I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
    Do you have any solution for this question?
Thanks

Do a Implicit Enhancement at the PBO of this subscreen.

User exit or BADI to change the delivery date in ME51N transaction

Similar Messages

Maybe you are looking for