User Exit or BADI used to block the payment in MIRO
Hi all,
Is there any user exit or BADI to block the payment in MIRO . please give me in detail with all methods used.
Thanks
babu
can anybody give me any answer. thanks.
Similar Messages
-
User Exit or Badi for VL01N (before the delivery will be displayed)
Hello Togheter:
I have to change the sort order of the delivery items in VL01N before they will be displayed (not at the moment when they'll be stored on the database). Does anybody know any enhancement or user exit or BADI that i can use for this? I've tried with BADI LE_SHP_DELIVERY_PROC, but there is no methode which I can use for reordering the table XLIPS/LIPS before the delivery will be displayed.
Thanks in advance
KlausExits for VL01N ::::::
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Hope they may help a little.
Regards,
Jignesh -
Exit or Badi used for G/L Block in Tcode FS00,FS02
Hi all,
Is there any User Exit or Badi available to block the G/L Account at company code level while create or change.
Pls reply.
Thanks in advance.You can go for implicit enhancements.In case no badi or exit is avaiable.
-
User exit or BADI for MIGO to Update a field in MSEG-KOSTL
Hi,
I want to update/change the KOSTL (Cost center) value before creating/posting the document.
Please let me know is there any user exits or BADI, which will export the MSEG structure.
Regards,
GaneshHi
I believe there isn't a BADI or EXIT allows to change item data, I usually use the exit to change the item text EXIT_SAPMM07M_001 (the BADI MB_MIGO_ITEM_BADI should be the same thing) where I change the data by field-symbols:
FIELD-SYMBOLS: <KOSTL> TYPE MSEG-KOSTL.
ASSIGN '(SAPMM07M)MSEG-KOSTL' TO <KOSTL>.
<KOSTL> = .......
Max -
Hi
I have the below requirement.
In the transaction Me51n, in the item data->valuation tab
when the valuation price is greater than 5000.then
it should display an error message 'user should not enter mothan price Rs 5000'.
Please provide me the user exit or Badi name to implement the code.Hi,
Use this code
it will tel u all the exits related to ur transaction.
Just go to se38 and copy this code there, activate and execute
*& Report ZTEST_MANISH
*& Program to find exits for a particular transaction
REPORT ZTEST_MANISH NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Or u can use the following steps:
1. Open transaction SE24.
2. Now open the object CL_EXITHANDLER in display mode.
3. Go to the method tab and double click on the method GET_INSTANCE.
4. Put a break point on cl_exithandler=>get_class_name_by_interface.
5. Now execute the transaction you want to find EXIT for, it will take you to the above method.
6. Write EXIT_HANDLER in fieldnames and hit enter, it will tell you the EXIT used for your transaction.
7. Hit F8 and it will tell you all the EXITu2019s for your transaction.
Regards,
Manish -
User exit or BADI for VL01N and VL02N
Hi Experts,
My requirment is while creating and changing delivery, change inco terms of delivery when some condition satisfy. can you any one tell me any user exit or badi , i will write the logic to change inco terms based some condition.
Regards
Jayasundercreate the following program in $tmp.. execute it . you will get all the user exits and BADIs.
*& Report Z_FIND_EXIT_TRANS
report z_find_exit_trans.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
**& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
**& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode.
selection-screen skip.
selection-screen end of block a01.
**& Start of main program
start-of-selection.
*Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
*Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
*Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
*Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
User exit or badi for me52n transaction.
Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards -
User Exit or BADI for Operation tab of IW32 Transaction
Hi All,
Currently I am working on the transaction IW32. I am looking for a user exit or BADI which can trace the item level changed data for operations.
Thanks in advance.
Regards,
Rajeshhi,
User Exit IWO10012.
BADi's
IWO1_ORDER_BADI
IWO1_PREQ_BADI
IWO1_SCREEN_MODIFY
Hope this helps
Regards,
Shashank -
User Exit or BADI to control GUI/Toolbar of TP04
Hi All,
I need to know any user exit or BADI enhancement for changing the toolbar of TP04. As of now, if we open TP04, we get two pushbuttons (Overview and Approve). We have a requirement like, only Overview should be displayed. Users should not Approve it and hence we need to take that pushbutton off. Kindly suggest me if anybody is aware of any exit or BADI enhancement to control GUI or Toolbar of TP04.
Thanks a lot!!Thanks for the reply. However, we have a scenario because of which we are going for this disabling of the button. We have workflow for the travel management . The t-code TP04 will be given to SAP portal directly. And in workflow we have made Approval available for Save button, because of the event being triggered. So we do not again want this Approve button explicitly. And hence are thinking of disabling it. Is there any way to get this?
Thanks a lot!! -
User Exit or BADI for MIRO after save
Hi
I want to show a message in MIRO once the invoice document is create but I am unable to find a user exit or BADI after save of the MIRO transaction.
Please guide me in this aspect.
Regardstry to run the below codes in a new program,it can help you to find all user exits of a t-code:
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir WHERE funcname =
tfdir-funcname.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND
tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
FBL3N/FBL5N/FAGLL03 user exits and badis for authorization
Hi Gurus,
I have tried userexit and badis for FBL3N , FBL5N and FAGLL03 for the purpose of user want to display documents created by him and other users documents should not display . Please suggest me any user exit or badi and logic for the same.
Moderator message: last warning, if you continue to disregard moderator messages and post the same question nevertheless, I will initiate deletion of your user ID.
Edited by: Thomas Zloch on May 10, 2011 9:57 AMHi,
1. Execute report FBL3n and in the output goto menu SETTINGS -> SPECIAL FIELDS and add the entry BKPF-USNAM and save. Now the user who have created the entry will be available in your FBL*N report.
2. Goto BTE event 00001650 - SAMPLE_INTERFACE_00001650, and copy the FM SAMPLE_INTERFACE_00001650 to custom FM. Inside this custom FM, first pass the value of I_POSTAB to E_POSTAB. i.e
E_POSTAB[] = I_POSTAB[].
Now loop E_POSTAB and check whether E_POSTAB-USNAM NE SY-UNAME, then delete that entry from the internal table E_POSTAB.
3. Now create a custom product in FIBF transaction and check the activate checkbox. Attach the event 00001650 and custom FM to the P/S module customer part.
Hope this will meet your requirement.
Regards,
Harish
Moderator message: please be more selective when replying to questions (especially the "do my work" kind), better check the posters history before investing effort.
Edited by: Thomas Zloch on May 10, 2011 9:59 AM -
BADI/user exit to be used EIPO-TEXT1 field of the outbound delivery line item?
Hi ABAPERS,
Need some help on an enhancement with reference to outbound delivery in SCM module.I have a requirement for an enhancement to ensure that the License Check is performed for each Delivery Item based on the Material`s Export Control Parameters and updating the license number identified against each of the line item in the outbound delivery in a predetermined field.
Basically, Using enhancement, find the appropriate License based on the information fetched from the Delivery Document and check if this is matching with the available License Information. Then the appropriate License fetched should be visible in the License Log of the Delivery Document.
The valid License No. fetched should be updated at the Delivery Document Item – Foreign Trade – Comments Tab-Description Field 1.(ie. populate the license T606Z-GENNR in EIPO-TEXT1 field of the outbound delivery line item.).
Could you please advise on the BADI/user exit to be used in this case. Request your inputs.I found the solution myself. I was actually not needing a user-exit to do this. I just simply solved it by using function modules READ_TEXT and SAVE_TEXT in a customer program.
Regards. -
User Exit or BADI for Blocking process orders from R/3 to APO?
Dear Experts,
I am looking for a user exit or badi to block the process orders from R/3 to APO. As per standard it is not transferring orders which are clsd(closed status). Means that it is not updating live cache but its reading from R3.
We are facing some problems in cif queues which are not correctly maintained in R3 side. We dont want to touch those orders bcoz its very old data which is not required for planning.
There will be huge data which needs to be deleted while transferring through cif.
Please give any user exit (outbound intial transfer) from R/3.
Or any sugg. I apprecite your inputs...
Thanks
CrisHi Cris,
You can use user exit APOCF004 - Inbound Processing: Production Order/Planned Order in APO to prevent orders coming to APO by deleting orders which are not intended to goto APO from internal tables IT_ORD and IT_OUT.
Hope this helps.
Best Regards,
Ramesh M -
Request for User Exit or BADIs for outgoing posting block in F-53
Dear Gurus,
Can somebody advice me which user exit or BADIs to use for the below scenario:
My users is using more than one alternative payee for their invoices, therefore when they use F-53 to clear open item, they always accidentally do multiple payment for document no. with different alternative payee. Worst case is that the posting go through! But when they print out the form, its too late and they had to do reversal.
I like to enforce a block so that if the alternative payee is different across the document no. selected, they cannot post.
Desperately,
Belinda
Edited by: Belinda Lee on Jun 3, 2008 5:34 PMHello,
You can use Business Transaction Event (BTE) . You should use 00001120 events.
You must do some customizing in FIBF.
Regards,
Burak -
How to find the user exits and BADIS from SPRO
Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
MadhaviHi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi
Maybe you are looking for
-
I have a new pc, and want to transfer my itunes library, help me?
I got a new computer today, it upgrades and old laptop that I'm currently running itunes off. its connected to the new computer by a wireless network, but I cna figure out how to rtansfer my library. I'm not a computer whiz, but I dont know what to d
-
My macbook works with windows but it wont with osx Help please
Hi every one i have macbook pro p8600 Dual core 4gb ram 320 gb hdd but for some reason my macbook pro cant run osx any more may be i sound stupid but i am new in this few weeks back suddenly my macbook pro start running real slow and laggy i wont evv
-
Received HTTP response code 500 : Internal Server Error in XI
Hi, I have configured a scenario SOAP to RFC in XI. when I am sending a message from web service, I got following error <SOAP:Fault> <faultcode>SOAP:Server</faultcode> <faultstring>Server Error</faultstring>
-
Adobe XI "Internal error occured"
I have tried to uninstall and reinstall but still get the same error message when trying to open program or PDF files.
-
Emailing from discoverer plus 10g
Hi, Please help on the ff question posed to me from our client who just had Discoverer Plus 10g implemented at their sites. 1. The old vs 3.1 desktop had the ability to send a report in an e-mail attachment to many recipients as a .dis file. This fea