User exit or FM to change the process order

Hi All,
I want to know any FM or user exit to change the process order.
Any help will be appreciated.
Regards,
Seema
Edited by: Seema Naharia on Dec 10, 2009 8:41 AM
Edited by: Seema Naharia on Dec 10, 2009 8:42 AM

Hi Nihad,
I couldnot find this BAPI.
Regards,
Seema

Similar Messages

Find the user exit while creation and change of sales order

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022     The logic for the user exit to explode should consider the following assumptions and validations
o     Customer master to have the entry at KNVV-KVGR1
o     Material master to have the entry at MVKE
o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A     Quantity / Scale     UoM     Price(£)
     0-10     PAL/TES     20
     11- 20     PAL/TES     10
     21- 30     PAL/TES     5
     31-40     PAL/TES     2.5
     >41     PAL/TES
Product B with Scales mentioned below
Product B     Quantity / Scale     UoM     Price(£)
     0-15     PAL/TES     25
     16-20     PAL/TES     20
     21- 30     PAL/TES     15
     31-40     PAL/TES     10
     > 41     PAL/TES     5
u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022     The expected results should be
o     Product A qty 10 + B qty 15 added = 25Pal
o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

User exit in VA01 for changing the status profile

Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
Santosh

Hi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
    OBJNR                          = XVBAK-OBJNR
    STSMA                          = G_STATUS
NO_CHECK                       =
EXCEPTIONS
   OBJECT_NOT_FOUND               = 1
   NO_STSMA_CHANGE_POSSIBLE       = 2
   STSMA_NOT_FOUND                = 3
   OTHERS                         = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u.

User Exit or BADI to change the product cost

Hi All,
My requirement is to change the product cost when the costing engine is running via ck11n or ck40n. Iam looking for user exits and BADI's for this requirement.
I did look into the BADI DATA_EXTENSION_CK but this particular BADI does not have export or changing parameters. Can anyone suggest any user exit or BADI's for this requirement. I also looked into other BADI's like
CK_KALAMATCON2_CI
COSTINGRUN_CK
COST_APPORTION_CK
CO_PROD_COSTING_CK
DYNPRO_EXTENSION_CK
ORDER_COSTING_CK
QUANTITY_STRUCT_CK
SUR_STOCK_TRANSF_CK
VALUATION_CK
But none of them served the purpose. Plz help...Thanks in advance...
Regards,
Nirmal.

Hi,
Check followinf enhancement spots:
CO_PROD_COSTING_CK              Cost Management for Joint Products (Costing, Target Costs)
COSTINGRUN_CK                         Edit Costing Run
ES_CAL2TYPE                             ES_CAL2TYPE
ES_LCK40VWS
ES_SAPLCK00                            es_SAPLCK00
ES_SAPLCK01                            es_SAPLCK01
ES_SAPLCK04                            SAPLCK04
ES_SAPLCK2U                            es_saplck2u
ES_SAPLCK36                            es_saplck36
ES_SAPLCKCC02                        ES_SAPLCKCC02
ES_SAPLCKDI                             ES_SAPLCKDI
ES_SAPLCKKK
ES_SAPRCKCU
ESC_CL_COSTING_PERSISTENCE
LCKDIO2M_01                             ES_SAPLCKDI
LCKDIO2T_01                              ES_SAPLCKDI
ORDER_COSTING_CK                 Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK               Enables Quantity/Structure Changes in Costing
VALUATION_CK                           BAdI for Valuation in Product Costing
Hope this may be useful..
Regards,
Prashant

User exit or BADI to change the delivery date in ME51N transaction

Hi Gurus,
I need a user exit or a BADI where I can change the delivery date in the item overview tab for each material. I need to calculate the date according the vendor contact details.
Please let me know if there is any BADI or a user exit for the same
Thanks a lot!!!
Sharath

quick search for exits/badis: get package name and supply it into se80
or
se15
thanq

User Exit or BADI to update the service order in R/3

Hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1. Planner Group
2. PMActType Plant maintenance activity type
3. Cost/Profit Centre
4. WBS element
5. Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ramana

Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph

User Exit or BADI to update the service order

hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1.     Planner Group
2.     PMActType Plant maintenance activity type
3.     Cost/Profit Centre
4.     WBS element
5.     Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ram
Message was edited by:
        RAMANA MYLAPALLI

Best Possible way is.
go to se24 -> type in CL_EXITHANDLER -> Go to get_instance method.
Put a breakpoint on CALL METHOD cl_exithandler=>get_class_name_by_interface.
Now run the transaction and check which all BADI and user exits are invoked when u call the transaction.
Idenitfy the BADI which can be useful to you.
Reward if u find it useful.
Thanks
Kartavya

User-Exit OR a BAdi for the Purchase order create.

Hi,
I am looking for a User-Exit or a BAdi which is fired when the Purchase order is being created in the SRM server via Web template. The requirement is as follows:
There is a flag(Check box) at the the item level, Basic Data tab. This flag is called as Unlimited Overdelivery Allowed. It is with the tolerances field. Now I want this flag to be always set for a PO of a material of certain type.
Can anyone tell me which User-Exit OR Badi I should use to always set this flag?
The Technical field name is UNLIMITED.
I tried a lot but could not get any.
Regards,
Deepak.

Hi Deepak,
Did you try doc_change badi? THis badi is available in all the bus objects.
thanks,
Ashwin

User Exit for CO11N to populate the Ref Order in Prod Order when Rework Ord

HI All,
I created a Production Order(100023) using TCode CO01 with 10 Qty.
When i am creating a Production Order confirmation using TCode CO11N, i Confirmed 9 Qty and 1 Qty for Rework Order, it is confirming the 9Qty and creating a new Production Order (100024) for 1Qty.
As per the requirement it is working fine. While system creating a Production Order (100024) for the Rework Qty, i need to populate the Reference Production Order number (100023) in the field Ref. Order in Control Data tab in the Production Order.
Can any one suggest me how to populate this field? Is this possible by any USER EXIT or BADI ?
Or Can we do it by configuration?
Regards,

Hey all: I already have solved it. This was solved using a batch input application: before is launched the MIGO transaction, we print the smartorm using ME38 transaction with SHDB.

COR2 user exit for saving item changes

Hi,
i need to change item contents with user exit while saving in COR2 transaction.I found several user exits with debugging.But could not accomplish to change fields.
Please give me a user-exit name which can change the item contents while saving.
Thanks.

Hi burc,
what about enhancement CONFPI05 Process Ord. Conf.: Cust.-Specific Enhancements when Saving, EXIT_SAPLCORF_405.
Or tell in more detail what is it you want to change.
Regards,
Clemens

Material list layout need to be changed in Process Order

Hi All,
       I am using 4.6 B , here I want to change the process order material list layout .In the later version (4.7 & ECC 5.0) I could able to find the option 'Change Layout' in the process order itself. Incase of 4.6B no such like option found .So could anyone know me where shoud I can change the layout .
   Particulary I need to change the sequence of columns in layout.
Thanks in advance.
Anil

Hi Amit,
     I have tried the option already , but could not able to alter the sequence of the fields apart from the hiding of fields .I required to alter into customer defined sequence of fields in the layout , so would appreciate your suggestions on this .
Thanks
Anil

User exit for setting tax indicator in Sale order

Hi All,
I want to know if there is a way (user exit) that could look at the Sales Order Type , particular Item Pricing Condition and Ship-to party State and set the materialu2019s tax classification (VBAP/TAXM1) to u201C0u201D (Exempt) ?
Thanks in Advance!
Sonali.

Hi Ramesh,
I have put the code in the user exit, and I am able to set the tax classification indicator but I have a problem... Before setting the indicator I need to check for the Usage code of the line item (This code I am using instead of checking the Pricing condition) . I am able to read all the values of line item in VBAP structure in the user exit except for the first time this user exit is hit as soon as a line item is entered it is not picking up the Usage code. That field is blank.
But if add another line item and go into the user exit I can see the previous line item Usage code in XVBPA table.
Do you have any idea why usage code is missing in VBAP structure in the user exit or is there any other table or structure where I can get the usage code?
Thanks in Advance!
Sonali.

User exit or BADI available for the CAPP in CA03.

Hi,
I have a requirement to populate the standard CAPP values to the work center activities of the routing only when all the activities are having a blank value.Please see the below paragraph for better understanding.
Currently in SAP when executing CAPP for a work center of the routing it over writes the existing values populated on the routing for the setup,labor,standard labor,man occupation,machine occupationetc whether the values are blank or not. An enhancement needs to be made to only populate operations standards when all the values are blank.
If routing is not populated with setup, machine, labor standards, man occupation, machine occupation and work center is setup for default standards in CAPP, then run the CAPP process to apply standards from work center zcappstds table. The program that is run to apply these standards currently is SAPLCETO. Potentially ca96 and the batch process that updates the material master RCPMAU01 will have to be adjusted as well.
Please help me if anybody knows the user exit/Badi for this requirement.Please reply me soon this is an urgent requirement
thanks in advance,
Samyuktha.

I dont have details abt exact user Exit or badi which will suit ur requirement. But below info will give you the way to find out the same.
Have a look at below link,
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Best Regards,
Vibha
*Please mark all the helpful answers

User Exit for FF68 to modify the bank deposit slip

Hi ,
I am searching for a user exit on FF68-to modify the bank deposit slip.
Users want to print the cheque deposit slip grouped by the bank/branch and the cheque number.
currently it is not grouping them even they have the same cheque number
i am a bit new to enhancements, and user exists
I searched the cmod and vmod but could not find smthing useful
Can you please help?
Thank you

hi Shailaja
thank you very much for your help
i checked it via smod
It says Transfer Additional Data in Finnish TITO Format.
do you know what steps to follow to make the change?
i am new to this
as far i read i need to change this exit -change the table
but how to link this with the code?
does the ff68 knows that exit already?

User exit or FM to change the process order

Similar Messages

Maybe you are looking for