User exit or other enhancements to change the status of the kanban.
The requested to trigger the movement when the kanban status changed from empty to full.
if itu2019s possible to use user exit or other enhancements to change the status of the kanban.
can you please guide me iam new for enhancements.
I think you're seeing standard SAP behavior. However, a discussion with your SD/LE functional team member might be beneficial. Personally, I don't think SAP supplies a way to "add back" to that quote. However, you might develop something that changes the quantity on the quote (essentially adds to the original quantity), based on the fact that a SO line got rejected.
Similar Messages
-
Please send material or good lionk on USER-EXIT,BADI and ENHANCEMENT
Hi All,
Please send some step by step material or good lionk on USER-EXIT,BADI and ENHANCEMENT which will be usefull for beginners like me.
Thanks in advance
SrikantaHi Srikanta,
Please see the SDN page for ABAP Enhancements and Modifications:
https://www.sdn.sap.com/irj/sdn/abap?rid=/webcontent/uuid/109f5161-ee76-2910-cb99-db10b559ef4b [original link is broken]
Cheers,
Ville -
User exit or BADI for standard change Log ?
Is there user exit or BADI for standard change log update ?
I want to update a customer fields into standard change log table.
Could someone tell me about it?Could anbody tell me ?
-
I can't open or receive hotmail emails on my macbrook pro, but i can on other devices. i changed my password, emptied the cache, tried using a different browser, etc. i think i have a virus. help!
Thanks for your help. that's not working either! ugh!!
I can open hotmail, but it's not formatting right, i can't open emails, nor send them.
Thank you so much for trying to help. I really appreciate it.
I understand that you can't get a virus by opening an email, but it seems way too circumstancial! This is my third mac -- because unlike PC -- I never had a problem. I understand this problem is not with my macbook, because every other website works fine -- it's hotmail! -
Changing the status of the sales order item based on reason for rejection
Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.SubasreeHi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath -
Is it possible to control and change the status of the notification center in iPhone for a particular application.
1) In the application push notification is implemented.
2) Once this application is installed we can see the app in the notification center.
3) There is an option to ON or OFF
4) In the application we need an option to check if the above option is ON or OFF.
5) If the option is OFF we need to provide the user an alert stating that in the notification center has it option off and here we have to provide an option to user to switch ON the option at the notification center.Well, I could find a fix for that.
My mistake was that 1: I wasn't getting the correct ntype code for my value list type. And 2: I wasn't giving the Id name.
The new result came as this:
statusObjRef = doc.getStatusRef();
statusHome = IBeanHomeLocator.lookup(session,statusObjRef);
status = statusHome.findUniqueByNameType("Drafting Agreement", 1);
doc.setStatusRef(status.getObjectReference());
In case anyone has this problem, you should check the collection of values internal id, that's the actual ntype code (the number you send on the second parameter).
But I could still use help having some advice on the Master Agreement elements handling (getting data from the master agreement or the data thas is being edited at the moment before saving).
If anyone could give some advice, they would be very welcome -
RE: Mail notification on changing the status of the spport desk messages
Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
SowmyaHi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG]. -
Which table i will get the status of the User decision Result status
Hi Experts
Which table i will get the status of the User decision Result status
(eg : Inspection completion forced )
This i can see in QA33Hi jag
Ok fine actually it is not storing in any table...these r all text symols...if u see this program MQEVAF22...U EILL GET SOME IDEA
CALL FUNCTION 'QAST_STATUS_CHECK'
EXPORTING
I_OBJNR = QALS-OBJNR
I_STATUS = C_STATUS_PAKO
EXCEPTIONS
STATUS_NOT_ACTIV = 01.
IF SY-SUBRC NE C_RC01.
MOVE C_KREUZ TO L_STAT_PAKO.
ELSE.
CLEAR L_STAT_PAKO.
ENDIF.
Prüfen, ob Los bestandsrelevant ist
MOVE RQEVA-STAT_BERF TO L_STAT_BERF.
Prüfen, ob Los auf SKIP sitzt
CALL FUNCTION 'QAST_STATUS_CHECK'
EXPORTING
I_OBJNR = QALS-OBJNR
I_STATUS = C_STATUS_SKIP
EXCEPTIONS
STATUS_NOT_ACTIV = 01.
IF SY-SUBRC NE C_RC01.
MOVE C_KREUZ TO L_STAT_SKIP.
ELSE.
CLEAR L_STAT_SKIP.
ENDIF.
IF QALS-STAT35 >< C_KREUZ.
VE noch nicht getroffen !
IF ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 )
AND QALS-STAT13 = C_PPKTTYP-PHPR
AND G_ANZAHL_PPKT_LOEVM > CI_0.
Es wurden physische Proben storniert ! PRIORITÄT 1A
MOVE TEXT-I17 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I17'.
ELSEIF ( QALS-STAT14 = C_KREUZ AND QALS-OFFENNLZMK > CI_0 )
OR ( L_STAT_PAKO = C_KREUZ
AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ) ).
Prüfung wurde abgebrochen ! PRIORITÄT 1
MOVE TEXT-I04 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I04'.
MOVE C_KREUZ TO L_ICON.
ELSEIF G_ANZ_RUECK_MK > 0.
Es wurden Merkmale rückgewiesen ! PRIORITÄT 2
MOVE TEXT-I01 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I01'.
MOVE C_KREUZ TO L_ICON.
ELSEIF QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 .
IF QALS-OFFENNLZMK > CI_0.
Es sind nicht alle Merkmale abgeschlossen ! PRIORITÄT 3
MOVE TEXT-I02 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I02'.
ELSEIF QALS-OFFEN_LZMK > CI_0.
MOVE TEXT-I05 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I05'.
ENDIF.
ELSEIF QALS-WERK NE QALS-WERKVORG.
Prüflosmenge wurde umgelagert auf anderes Werk Priorität 4
MOVE TEXT-I16 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I16'.
ELSEIF QALS-LMENGEIST > QALS-LOSMENGE.
Istmenge im Los größer als Losmenge! Priorität 5
MOVE TEXT-I15 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I15'.
ELSEIF L_STAT_SKIP = C_KREUZ.
Prüfverzicht: Los ist geskippt ! PRIORITÄT 6
MOVE TEXT-I03 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I03'.
ENDIF.
ELSE.
VE getroffen bzw. eingetragen
IF ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 )
AND QALS-STAT13 = C_PPKTTYP-PHPR
AND G_ANZAHL_PPKT_LOEVM > CI_0.
Es wurden physische Proben storniert ! PRIORITÄT 1A
MOVE TEXT-I17 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I17'.
ELSEIF ( QALS-STAT14 = C_KREUZ AND QALS-OFFENNLZMK > CI_0 )
OR ( L_STAT_PAKO = C_KREUZ
AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ) ).
Prüfung wurde abgebrochen ! PRIORITÄT 1
MOVE TEXT-I04 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I04'.
MOVE C_KREUZ TO L_ICON.
ELSEIF L_STAT_PAKO EQ SPACE
AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ).
Es sind noch Langzeitmerkmale zu bearbeiten ! PRIORITÄT 2
MOVE TEXT-I05 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I05'.
ELSEIF L_STAT_BERF = C_KREUZ AND QALS-STAT34 EQ SPACE.
Los ist bestandsmäßig noch nicht entlastet ! PRIORITÄT 3
MOVE TEXT-I06 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I06'.
ELSEIF QALS-WERK NE QALS-WERKVORG.
Prüflosmenge wurde umgelagert auf anderes Werk Priorität 4
MOVE TEXT-I16 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I16'.
ELSEIF QALS-LMENGEIST > QALS-LOSMENGE.
Istmenge im Los größer als Losmenge! Priorität 5
MOVE TEXT-I15 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I15'.
ELSEIF L_STAT_SKIP = C_KREUZ.
Prüfverzicht: Los ist geskippt ! PRIORITÄT 6
MOVE TEXT-I03 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I03'.
ENDIF.
ENDIF. -
Change the status of the service ticket in crmd_order
Hi,
i want to change the status of the ticket with out changing manually in the transcation crmd_order.
I need the program to change the status based on transction number(service ticket number)
Please guide me is there any FM to get that.
Thanks in advance,
SureshGot the solution:-)
It is defined in customization that when the status is closed, no changes can be done. So by removing that customization my code works both for both closed and open charms.
Thanks,
vinod. -
To change the status of the KANBAN
Hello Experts,
Please let me know how to change the status of the KANBAN from empty to full.
Thanks in advance
Best Regards,
zuberaHi zubera,
As quantum has suggested we can change the status of the Kanban in Kanban board...... in additon to that the GR of the replenishment object created through kanban (PO , Production order , STO) etc changes the status of the Kanban.
Regards
Kaushik -
How to change the status of the system programmatically with Function Module
I Was trying to change the status of the notification through STATUS_CHANGE_INTERN function module . But It is not changing the status of the notification.
Can any one help to understand what is going wrong ... or any other function module to change status of Customer complaint notification ..Hi KK,
Please can you take clues form the below discussion thread -
http://scn.sap.com/thread/775169
Thanks to all original contributors of this thread!!
NOTE: Please note that the main point explain here is that, if you are willing to change to a status Ex, NOPR, NOCO, etc then you will need to pass on the value 'I0070', 'I0072', etc. I will also go ahead and like to add one more point here to make the language check as well like "EN", 'DE', etc as these statuses are language dependent too.
Thanks,
Arijit -
Change the status of the bank statement posting
Hi,
Happy new year.
A bank statement was posted to the sub ledgers but it was not posted to the General Ledger, even though it has an * as the document number.
Consequently, the G/L is not reporting the correct balance, and for year end reporting we need the correct figures.
I have tried to post it via FEBP, (with "suppress subsequent postings" & "Bk posting only" selected), but no data was selected.
How can I post the statement to the G/L?
Can I change the status of the bank statemetn from "posted" into "to be posted" and try it again?
Thank you for your feedback.
Kind regards,
LindaHello srikanth.
Thank you.
How can I check that?
Kind regards,
Linda -
How can I change the status of the fileupload UI from disable to enable?
Hi, experts,
The Version of my Netweaver studio is 7.0.11.
I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
How can I change the status of the fileupload UI element from disable to enable?
Best regards,
taoHi
look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
and check if u bind each file upload element to binary property in the context -
What's the status of the Sales Deal(KONA-BOSTA:Status of the agreement)?
Hi Experts,
I have a requirement that the status of the Sales Deal must be equal to "D" (Final settlement of agreement already carried out). Who can tell me how to implement this?
Thanks & Regards.
KelvinHello,
The Agreement Status (KONA-BOSTA ) field can be set manually by the
user. The user can manually change the status field to 'A' or 'B'.
But the status 'C' or 'D' cannot be set manually.
Let me explain the flow :-
1) When the agreement is created , the Agreement Status (KONA-BOSTA)
field is empty.
2)If the user wants to go for settlement , then the status can be
directly changed to 'B' which means now the agreement is ready for
settlement.
3)Now once the credit memo request (for settlement ) is created , the
Agreement Status (KONA-BOSTA) becomes automatically to 'C'. User cannot
manually change it to 'C' .
4)After that creation of final settlement invoice document , the
Agreement Status (KONA-BOSTA) becomes automatically to 'D'.User cannot
manually change it to 'D'.
It can be viewed as
1) Agreement created > Agreement Status Open
2)User can manually change to 'B' > Agreement Status 'B'
3)Creation of CREDIT MEMO REQUEST > System automatically changes the
Agreement Status 'C'.
4)Creation of Final Settlement Invoice > System automatically changes
Agreement Status 'D'.
User can only put 'A' or 'B' manually.
'A' is just for check of settlemnt before release.
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points. -
In transaction code BBP_PD the status of the workitem is not updating showi
Hi Gurus,
We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
Please reply with your suggestions.
Thanks in advance.
MadhukarHi
Thanks for your reply.
We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
can you suggest something on this issue.
Workflow Item:
Workitem-ID 000002009126
Task WS90000040
Text Shopping Cart Approval N-Step 185522 (BADI)
Status STARTED
Statustext In Process
Date 09/24/2008
Time 08:18:09
Node ID Agent User State Workitem Created at
0040000000 Kotesh APP APP_KOTESH No workitem found
0040000002 No workitem found
0040000001 shiva APP APP_SHIVA No workitem found
0040000004 No workitem found
0040000003 shiva APP APP_SHIVA No workitem found
0040000006 No workitem found
0040000005 SM1 NNA_FA_SM_1 No workitem found
0040000008 No workitem found
Regards
Madhu
Maybe you are looking for
-
2010 Mac Pro boot 10.8.5 with 2nd drive?
I have a 2010 Mac Pro at work and I'd like to match the OS and ProTools setup that I have at home (MBP with OS 10.8.5 and ProTools 10/11). The Mac Pro is currently OS 10.7.4 and I'm using ProTools 9. OS 10.7.4 doesn't support ProTools 10/11. Is it po
-
My computer doesn't detect my Vision M 30
It started with my player working however the screen was scrambled. I couldn't read anything. So I did the clean-up, format and reset the firmware but now my Vision M turns on and says there is a firmware problem and it says to reload the firmware. T
-
Just installed Blackberry Desktop Software and it runs ok when I am not running Sprint Smart View (This is my program for my internet service / sprint air card). As soon as I start Sprint Smart View the desktop software no longer works and just shut
-
How to disable refresh every time I write code in dreamweaver
Hi....how to disable refresh every time I write code in dreamweaver...thank very much.
-
My iPad is in a boot loop. Can't use itunes.
Today my iPad went into a boot loop. I don't know the cause as I wasn't in at the time but it's possible one of the kids tried to update or something, however I just don't know. The screen blinks from the apple logo to the lockscreen and is totally u