USER EXIT:Purchase order services

In the user-exit: EXIT_SAPLMLSP_030 which is used for the services in PO has only structure srv_esll.In this user-exit I want the PO item .Please suggest me how to get the PO item details in this userexit.

Dear Danish,
This is while PO creation hence there wont be any PO number.
My scenario is this:While PO creation , I enter 10 items and for each item selected I will be entering the services and while doing this i select from item drop down.This BAdi will not get called and when it gets called first time it gives the last line item but not the selected item for service.
With thanks & regards,

Similar Messages

  • User Exit - Purchase Order Create - Payment Exceeded

    Hello All,
    When i will to save the PO, i need to check payment budget.
    I'm using the User Exit MM06E005/EXIT_SAPMM06E_012.
    But when the error is about payment budget exceeded, the message is displayed before the program enter in the user exit. So, i can't check because the program do not enter in User exit.
    How can i solve it?
    Thanks

    Hi ,
    If  ur craeting a accout assigned PO and ur getting the message caled , payment budget exceeded , then it means that,
    that account which ur assigning has got some limit of Rs.
    But ur total amount of PO is exceeding the limit and basically it s a functional issue, but if u want to ceck the exit for ur case then , what u can do is u craete a po whose total amount is less than that account limit.
    Even i was facing the same problem, so what i did i try to crate a po with only one line item and qty 2 with price 100 Rs only , and that error will not come and u can chk ur exit smoothly.
    If u face any problem , pls ask if i can reply u
    Regards

  • How to find the user exit for order cancellation

    I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
    I have got a Zreport where this order should not come as open order item.
    Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
    In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
    My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
    Regards.

    hi
    pls tell me t.code so that i will send all user exits related to that particular t.codes
    Thanks & Regards
    phaneendra

  • Shipment Document, No Purchase Order & Service Entry Sheet generated

    Hi Everyone
    We have transportation & shipment module configured in our company.
    We are running this process from the last 3 years without any problems whatsoever.
    But suddenly from the past 1 month we are facing a very serious issue while saving shipment cost document, i.e *no purchase* *order and service entry sheet* is generated on saving the service entry sheet.
    A purchase order and a service entry sheet is generated automatically whenever a shipment cost document is saved. All the congifurations & customisations are correctly done as per sap standards and no request have been moved to production which will disturb the above process.
    I have scanned the almost all sdn.sap queries for solutions and have incorporated all the suggestions which will help to solve this issue.
    But still the problem persists, i.e still no purchase order & service entry sheet is generated automatically after saving the shipment cost document.
    All the settings mentioned below are checked thoroughly.
    -- assign puachaging data
    --maintain acc. assignment cat.
    --automatic G/L acc. determination
    --automatic determination of CO assignments
    Check the following prerequisites for shipment cost processing has maintained or not
    -Shipment must marked as relevant for shipment cost
    -Shipment must have the required total status set in shipment cost type
    -Shipment must have transportation status planned
    -Shipment must have service agent
    -Maintainiing and assign shipment pricing procedure to shipement cost
    -Maintaining condition records,
    Please suggest some solutions to the above issue.
    Thanks & regards
    satish

    Hi Sumit
    Thanks for responding
    In tcode t_56 generate PO is "C", I.e generate po for a validity of 1 month, the item category settings are the same since as before.
    But for some reason the system is not generating any purchase order from the past month.
    The error message is shown below.
    No purchase order item was generated for shipment cost item 0000014950 000001
    Message no. VY633
    Diagnosis
    You have marked the shipment cost item for transmission to the finanacial accounting department. For this transaction, you need an order item. The system has attempted to create an order item, but has not succeeded in doing so.
    System Response
    Transmission of data to financial accounting without a valid order item is not possible. For this reason, all items that you have marked for transmission are reset.
    Procedure
    The log displays further information as to why the system could not create an order, although all the settings in Customizing were configured. You can also create an order manually that corresonds to the shipment cost item and then transmit this again.
    Thanks
    satish

  • Purchase Order Services

    Dear all,
    how can i solve this problem:
    I create an PM order for a purchase order services. The operation itselfs include the services and in the components i insert some different materials. On the bill are other quantities and prices later than the beginning, when i created the order. Now, is it necessary or adsivable to change the pm order and the purchase order? For all purchase order services there is much to do. Can this be possible?
    Thanks & best regards

    Hi,
    Are components will be provided to External vendor by the company? If so, then you can define the components in component tab, else its not necessary to define the components in Order.
    Only for the internal operations, components will be planned & the variances can be calculated between planned & actual. But for external, its not possible to plan components as internal team will not sure enough about the operations.
    Regards,
    Maheswaran.

  • Purchase Order Service Type

    Hello All,
    My client wants the gross price to be calculated based on the quantity on purchase order (service Type).
    Can anyone help on this please.
    Cheers

    Hi Satish....
    You can see the Gross Price Calculations on Right Click Gross Profit Option for Service Type.....
    Please check it on Sales Window....
    Regards,
    Rahul

  • Purchase order Service

    Hi All,
    I created a Service Purchase Order. I edited the line amount and updated it. Now when i am trying to take a Print of that copy, the discount column is taking automatically in the print. Why it is so..
    Thanks & Regards
    Kandukoori

    HI
    Check the PLD of Purchase order(service).....
    In that PLD,you check the fields....
    If there is any such field 'Discount' in PLD,u remove that field and recheck for logic...

  • User exit while saving Service Purchase Order

    i want to update one z table from the Service PO, after saving. Hence i require , an user exit, which will give the details of the service tab , of the PO. I am not able to get any exit, where the details of the Service tab, of the transaction me22n.
    Below is the screen of the Service tab of the purchase Order Screen :
                                                                                    <b>Line      DeService numbShort text                   Quantity          Uni    Gross priceCr
        10          3000001     Sub-Con Recruitment Commissio91                DAY1,249.00       IN
        20          3000001     Sub-Con Recruitment Commissio91                DAY1,249.00       IN</b>

    hi,
    check this out .
    Transaction Code - ME21 Create Purchase Order
    Exit Name Description
    AMPL0001 User subscreen for additional data on AMPL
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    M06B0004 Number range and document number
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06E0004 Changes to communication structure for release purch. doc.
    M06E0005 Role determination for release of purchasing documents
    ME590001 Grouping of requsitions for PO split in ME59
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MMFAB001 User exit for generation of release order
    MRFLB001 Control Items for Contract Release Order
    LMEKO001 Extend communications structure KOMK for pricing
    LMEKO002 Extend communications structure KOMP for pricing
    MM06E011 Activation of PReq Lock
    No of Exits: 38
    Kishi.

  • User exit sales order change (VA02)

    Hi 
    For certain users , field shipping conditions  VSBED (Header)  needs to be  in display mode only in T-code Va02
    i am creating a security object and that will be assigned to those  user roles.
    I need user exit which can be used to trigger this change ( executing security object)
    Sri

    Hi Please check these
    Userexit
    SDTRM001                                Reschedule schedule lines without a new ATP check
    V60F0001                                SD Billing plan (customer enhancement) diff. to billing plan
    V46H0001                                SD Customer functions for resource-related billing
    V45W0001                                SD Service Management: Forward Contract Data to Item
    V45S0004                                Effectivity type in sales order
    V45S0003                                MRP-relevance for incomplete configuration
    V45S0001                                Update sales document from configuration
    V45P0001                                SD customer function for cross-company code sales
    V45L0001                                SD component supplier processing (customer enhancements)
    V45E0002                                Data transfer in procurement elements (PRreq., assembly)
    V45E0001                                Update the purchase order from the sales order
    V45A0004                                Copy packing proposal
    V45A0003                                Collector for customer function modulpool MV45A
    V45A0002                                Predefine sold-to party in sales document
    V45A0001                                Determine alternative materials for product selection
    Business Add-in
    BADI_SD_SCH_GETWAGFZ             Scheduling Agreement: Read WAGFZ from S073
    BADI_SD_V46H0001                        SD Customer functions for resource-related billing

  • RM06BB20 - Change "created_by" user for Purchase Order

    Hi !
    We have a job running on ECC to generate Purchase orders from purchase requests (from SRM Shopping carts) with report RM06BB20 . In background it is using tcode me59n.
    This generate purchase orders with job user in "created_by" user. I need to replace this with shopping cart requester (or purchase requisition requester, is the same person) but EXITS and BADIS  I founs have header fields like "importing" and I can not change this field.(EXIT_SAPMM06E_006,ME_PURCHDOC_POSTED)
    ME_PROCESS_PO_CUST it is not called and I don´t know how to proceed ...
    Any suggestions?
    Thank you in advace and best regards!!
    Carla

    Thanks Edgard,
    But... due security restrictions Jobs must be runned by this specific batch user ...
    so... I believe we can´t.
    There are some way to call a SUBMITT program with an specific user inside a report ? in order to run just posting step with another user...

  • USER-EXIT - sales order, credit block

    Moderator message: moved to correct forum.  In future please use meaningful subject.
    my requiremnet is, Delivery for an sales order should be created even if it is a credit block i.e even the credit check is unsuccessful the order should be deliverd when we deliver the order from salesdocument->deliver.
    i need a user-exit for this to put this check.
    can ne one help me.
    regards,
    pavan,

    Hi,
    According to Std SAP if in case credit mgmt is activated system will check for credit limit for that customer before delivery.You will be trying to change the std scenario which is not advisable.
    However,
    Try user exit MV45AFZZ & in that
    FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
    Also check other exits related to delivery & credit mgmt from
    SPRO->Sales & Distr-> System Modifications->User Exits
    and check out the documentation part next to each exit in that category.
    Regards,
    Amit

  • Automatic Flow of Tax Code in the purchase order (Service)

    Dears,
    My purpose is to populate the Tax Code automatically in the Service Purchase order (Account assignment U and Item Category D). The tax code in the purchase order is required for ERS.
    If i maintain the tax code in the info record for a material, then the tax code is getting automatically flown from the Info record to the purchase order.
    However, if I maintain the tax code in the info record for a service, then the tax code is not getting automatically flown from the Info record to the purchase order. Is there any other settings to be maintained to populate the tax code for the service purchase order?
    Thanks & Regards,
    Ramesha

    Hi,
    The tax code in PO is at item level for stock material.
    In your case you cant make it default as inforecord field is at service level(You cant make it default for every service specifications you create at item detail level)
    Check the field info record in your service PO.
    Regards,
    Deepak.

  • ESW: Question on the usage of "READ PURCHASE ORDER" service operation

    Hi everyone,
    I plan to consume consume "READ PURCHASE ORDER" in my composite application. When I navigated to SAP Documentation on ES Workplace, I found out the following paragraph in the "Notes on SAP Implementation" section.
    Notes on SAP Implementation
    Prerequisites
    You must implement the application component Purchase Orders (MM-PUR-PO) so that you can use the operation.
    I am not clear about the prerequisite. How do I implement an application component?
    Here are the details to this service operation from ES Workplace:
    Software Component Version:       ESA ECC-SE 604
    First released with:      ESA ECC-SE 600
    Release State:      released
    Technical Name:      PurchaseOrderByIDQueryResponse_In
    Namespace:      http://sap.com/xi/APPL/SE/Global
    Application Area:      MM-PUR
    Webservice Definition:      ECC_PURCHASEORDER002QR
    Direction:      inbound
    Mode:      synchronous
    Idempotency:      not applicable
    Change/Update Behavior:      not applicable
    Could anyone please enlighten me on this issue?
    Thanks,
    Joon Meng

    Hi Michael,
    thanks for the quick reply.
    Now I understand the situation better with your explanation. But how can I check whether the application component is configured, which transaction? And how I can configure the application component?
    Are there any documentations or tutorials concerning this topic? I simply do not have the whole picture / process flow of the matter.
    Thanks in advance.
    Regards,
    Joon Meng

  • BADI/User Exit for Order processing

    Hi Experts,
    I have a requirement that whenever someone modifies the order belonging to a specific order category then some error/ warning is issued. Can you please suggest some User Exit/BADI in APO for the same.

    Hi Tiago,
    My requirement is to block the processing of Released process order from both Product view and Detailed Scheduling Board.
    If I am getting you correctly then in the mentioned BAdI and Method --I should call FM --/SAPAPO/OM_PEG_CAT_GET_ORDERS (to fetch orders by order category) to see whether the order category is for released process order or not.
    If its Released process Order --then I should block the change. Is that correct for both Product View and Planning Board?

  • User-Exit-- Notification & order

    Hi all.
    Notification with order --> IW51 transaction
    for eg.
    i am creating notification in iw51 with some 5 items. ven i am click the sales orders button which is @ iw51. what are the items found in notification is not copied to order, so i am again adding the items manually in order .
    so what i need is , i  need the user-exits r anytin to solve the problem
    my probelm is
    if i create notification with 5 items in IW51 transaction, ven i click the order button which is @ notification, all the items which is at notification (here v have 5 items in notification),that has to copy to order also..
    again again, i  dont want to add all the things in which is @ notification..
    Points vil be rewarded
    apart from this exit,  i dnt think, this belowed exit worked out.
    IWO10026
    IWO10027
    IWOC0001
    IWOC0002
    IWOC0003
    IWOC0004

    Hi,
    I found the exit . Its EXIT_SAPLCOIH_009. The warning message is showing up now.
    Regards,
    Dikshitha

Maybe you are looking for