USER EXIT REQUIRED DURING DELIVERY OF SALES ORDER VL01N

hi
i want to block all the delivers ( by default ) i.e after creating sales order when user go for delivery ( or runs transaction VL01N ) it should block all the deliveries
plz suggest user exit as i dont find any
thanks
taran

Hi taran,
Check, it may help you.
Exits for VL01N ::::::
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
LE_SHP_GOODSMOVEMENT BADI.
Regards,
Ramesh.

Similar Messages

User exit while creating delivery from sales order

Hi Guys ,
Is there any user exit in sales order which triggers when we try to DELIVER(from the menu bar) .
My requirement is to not include some line items(base on some condition) before they are included in the delivery .
Thnx in advance .
Anil

Hi Naimesh ,
Thnx for your reply.
I'm not sure of the functionality in VOFM .Can u please tell me how can i acheive my current functionality as explained above in my question .
I'll tell u my requirement .
When creating delivery , I have to check for some condition and depending upon this condition , the line items must not be included in the delivery .
I have acheived this by BADI LE_SHLP_DELIVERY~SAVE_DOCUMENT_PREPARE.
if suppose any line items gets deleted in the delivery(based upon my condition) , and then if I look at the status of the slaes order(VA03) , it shows partially confirmed at the header level and the item which is rejected(in delivery) shows OPEN .
Can u tell me how to update the status of the sales order header and item level (if any item is deleted) during creation of delivery .
Thnx .
Anil

Help required during delivery of sales order

hi
i want to block all the delivers ( by default ) i.e after creating sales order when user go for delivery ( or runs transaction VL01N ) it should block all the deliveries
plz suggest user exit as i dont find any
thanks
taran

Hi Taran,
I haven't check but the USEREXIT_SAVE_DOCUMENT exit in MV45FZZ should work:
if t180-trtyp = 'H'. "only for order create
vbak-lifsd = '..'
endif.
Regards,
John.

Screen /user exit for additional screen on sales order header

Hello sir's,
can anybody help me for this query---
Screen /user exit for additional screen on sales order header.
exit name.
Thanks in advance,
Vikram

Hi,
SAP has provided screen modification. This you can do on "Additional data B" screen at both header and line iteam level.
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 ( this is the screen exit at header ) or SAPMV45A 8459 ( this is the screen exit at item ) as user exits. There few more exits you will have to code to get this screen works. The are,
MV45AOZZ - PBO module of screen
MV45AIZZ - PAI module of screen
MV45ATZZ - Global data definition for user-exit.
Check this link for more info regarding user-exit in sales docs.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
We have alredy implemented this solution at line item level. Let me know if you have any question.
Regards,
RS

Logic and User Exit for Availabilty Check in Sales Orders,

Hi All,
I have a requirement of creating a Sales order from an Inbound IDOC. Before saving i need to do all the validations for the sales order including the availabilty check for the sales orders. If it is not fulfilled i need to reject the sales order creation.
I am trying to search for the logic for the availabilty check of the sales order but i am not able to find one. Please help me out with that and also i need the user exit for the availabilty check for the sales orders. Please help me out with that one too.
Regards,
Sharadendu

See this function Module for message type ORDERS
IDOC_INPUT_ORDERS all validations are there in this Function Module .
Please reward if useful.

Question - SD user exit for Billing with multiple sales orders

We have a situation where we are summarizing Accounting Billing document updates via OBCY, transaction type VBRK .
We will also have multiple sales orders per billing document.
One of our accounts is a COGS- clearing account which will post for both delivery and billing documents.
Our goal will be to clear the COGS-clearing account after the delivery and billing has occurred.
One alternative being evaluated is to update the assignment field ( bseg -zuonr) for the sales order.
To do this, one of the SD user exits , perhaps SDVFX008, would be necessary to update the sales order from vbrp-vbel2 to bseg-zuonr.
I am concerned about
1) will the update work
2) what will be the effect on summarization
If we try to implement the user exit , would we be successful to just update the assignment field for just the COGS accruall account. _Therefore the next effect is that AR,Rev, etc, would summarize , but the COGS clearing would break out due to the update to the assignment field..
Does anyone have any experience similar to this situation.
Thank you,
Jeff

Hi
You can use SDVFX008 or FI Substitution exit RGGBS000 (Form U100)
You can very well update the required GL (COGS Clearing) with the Sales order No... However, how exactly it would behave upon summarization, I am not sure about that.. you need to develop that and see
In the COGS account during PGI, Sales Order No is populated always in the field "Sales Order"... In your case, the COGS clearing account should be having sales order no populated...
So, if you are successful to populate Sales Order No during billing in the "Sale Order" Field for the COGS clearing account, that should also suffice...
or See if you can have relevant sort key in FS00 for the COGS clearing account so that Sales order no is always populated..
Regards
Ajay M

User exit in ATP Check for sales Order to trigger notification

Hi All
please let me know is there any user exit after ATP check or in ATP check for sales order to trigger a notication mail.
Regards
Kishore

Hi,
User Exits For Availability Check are given below:-
The user exits named here are planned for projects that are to be carried out in agreement with SAP development as they may only be used in consultation with SAP.
USEREXIT_PLANT_SELECTION in program RV03VFZZ is an exception to this rule (see below).
User exits in program FV45VFZZ
USEREXIT_ADD_FIELD_TO_HEADER
USEREXIT_ADD_FIELD_TO_LINE
User exits in program FV45VFZY
USEREXIT_DELIVERY_GROUPS
USEREXIT_MVERF_INIT
USEREXIT_QUOTA_KEY_VALUE
User exits in program RV03VFZZ
USEREXIT_AVAILABILITY_IN
USEREXIT_AVAILABILITY_OUT
USEREXIT_DARA_REFRESH
USEREXIT_PLANT_SELECTION
This user exit is used to adjust the flow during plant transfer. A list of permitted plants, where this material is created, is determined and checked in the standard R/3 delivery. A dialog box appears where you can select the plants. The user exits allow you to modify the plant table so that plant selection takes place in advance for every flagged selection and a dialog box becomes unnecessary.
regards
Vivek.

User exits for route determination in Sales order & Deliver creation

Hi Gurus,
I need to do some change in the route determination for both sales order & Delivery creation.
Can anyone suggest me which user exit I have to use.
Appropriate answers will be awarded.

Hi,
You can use the following exit for route determination - EXIT_SAPL0VRF_001.
The FM documentation is below. Check the functionality:
"The customer exit can be used for customer-specific route determination or to modify the inbound data for the company's own route determination.
The following data is transferred to support customer-specific route determination:
I_VBAK current order header (for route determination in sales order)
I_VBKD order business data (for route determination in sales order)
I_VBAP current order item (for route determination in sales order)
I_VBPA current sales partner
I_LIKP current delivery header (for route determination in delivery)
The following data can be modified and transferred back to the standard route determination or used for a specific route determination:
C_ALAND Country of departure
C_AZONE Departure zone
C_LLAND Destination country
C_LZONE Receiving zone
C_VSBED Shipping condition
C_TRAGR Transportation group
C_GRULG Weight group
C_FLAG_GEN_VT Flag: Route determination with generic shipping
requirements/transportation group.
C_FLAG_INCR_GRULG Flag: Increase weight group if no route
If you want to use a standard route determination with different parameters, trigger the exception 'CONTINUE_WITH_STANDARD'.
In the log table C_PROT, the log data from the customer-specific route determination can be transferred back. In this case, the log entries always refer to customer-specific messages. To add a message to the log table, the function module SD_ROUTE_DET_LOG can be used (see below).
If a route is determined in the customer-specific route-determination, it can be transferred back in the E_ROUTE field. If no route was found, the exception 'NO_ROUTE_FOUND' is to be triggered."
Thanks.

User-Exit for Checking Customer and Sale order type in Sales Order Creation

Hi Experts,
While creating the Sales Order once i enter sold-to-party and enter line item, i have to check the customer against the sales order type.
Please suggest me if any user-exit or enhancement or BADI available for it.
Thanks & Regards,
-VM

Hi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
mark if helpful
Regs,
Tushar Mundlik

User exit not active when saving sales orders

while creating a sales order (VA01) i need to update the storage location based on division . for this the badis and user exits are not triggering while creating a sales order for the above requirement
any solution........
<removed by moderator>
thanks in advance..
<Subject edited. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]>
Edited by: Mike Pokraka on Aug 7, 2008 8:38 AM

JVP,
MV45AFZZ this is the include which is trigger while creating SO.
use FORM USEREXIT_FIELD_MODIFICATION to write code.
your code look like if sy-tcode = 'VA01'.
update field.
endif.
Amit.

Need of User-Exit in the creation of Sales Order(VA01)

Hi,
In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
Thank you.

the following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

User Exit/ Enahancement/BADI in the sales order creation process

Hi,
We have an EDI process for creating a sales order, we want to change one of the partners on some of the lines according to the document type,
We know how to do it using the MV45AFZZ user exits but we want to do it using a BADI or an Enhancement,
Can anyone help us find a User Exit/ Enahancement/BADI ?
Thanks,
Mickey

Hi,
Thanks for the quick answer,
i created an implementation for this BADI and put a break point there but it didnt stop there,
i also tried a break point on FM "SXV_GET_CLIF_BY_NAME" to see if this BADI is on the list but i didnt find it,
i tried creating the sales order via VA01 and via the IDOC process,
Thanks,
Mickey

User exit for partner tab on sales order

Hi All,
Is there any user exit available for partners tab on sales order which should trigger when ever user changes anything from that tab like add/change remove any of the partners.
Thanks,
Suman.

Hi Guys,
Any Updates.
Thanks,
Suman.

Any user exit to copy text from sales order to PR

Hi,
Any user exits or bapi to copy text from Sales order to Purchase requisitions.
Jack

Hi
In SPRO , please use the menu path Materials Management - Purchasing - Purchase Requisition- Texts for Purchase Requisitions - Define copying rules
Here select the text and double click on Text linkages. There you can define the source text from sales order to the target text in PR.
Please try and let me know if you still have any queries.
Please reward points if this helps you
Rgds

USER EXIT REQUIRED DURING DELIVERY OF SALES ORDER VL01N

Similar Messages

Maybe you are looking for