User exit to add header pricing condition in sales order

Hi experts,
I have an urgent requirement in VA01/VA02 to automatically add a header pricing condition and rate (Kanban charges) for a certain type of Sales order (Kanban Sales order). Does anyone know what user exit I can use for this requirement? Also, the additional header pricing condition should be included in the net value for the item.
Thanks!

HI Leo
To add a condition price for a condition type, this has to be assigned in the pricing procedure. For each condition type in a pricing procedure, we will have access sequences. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by pricing routines. Go through transaction VOFM for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar

Similar Messages

Change header pricing condition in sales order

Hi,
I have an requirement in VA01 and VA02 to automatically edit one header pricing condition. The user can able to change the value of that condition type in header not in items . Does anyone know what user exit I can use for this requirement.
Thanks

Hi Sunil,
Plealse find below 2 methods to change header pricing conditions in sales order.
1.Goto SE38, give prog name as MV45AFZZ and in that write logic under USEREXIT_PRICING_PREPARE_TKOMK . (OR)
2) The same can be done by creating a Alt Calculation type routine through VOFM and writng the logic in the routine, which will then be assigned to the pricing procedure in the condition type which will automatically calculate the condition.
Try with the options mentioned above..
Regards,
KK

Need a user exit to add custom partner function in sales order @ item level

Hi,
Need a user exit to add custom partner function in sales order at item level. Goto --> Item --> Partner.
Thanks,
Thiyagi

HI Leo
To add a condition price for a condition type, this has to be assigned in the pricing procedure. For each condition type in a pricing procedure, we will have access sequences. If we follow this approch, the price is automatically extracted basing on the access sequences when condition records are maintained. For this, no coding is required and everything can be done by configuration by Functional consultant.
Naren is right to point out on the same.
If you need to change the price for a particular condition which already exists, you can go by pricing routines. Go through transaction VOFM for the same.
I advice you to discuss with your functional consultant and understand the requirement and then go for modifying accordingly.
Kind Regards
Eswar

What user exit can add / delete lines on a sales order?

Hi experts -
We are going to be using a 3rd party to give us pricing, so we need to make a call for each line item to get prices. This may give us free goods, so we will need to add / remove lines from a sales order.
Any ideas what exit will allow us to do this?
Thanks,
Mark

Hi,
Try BAPI:
BAPI_SALESORDER_CHANGE
Regards,
Gilberto Li

User exit to update the incompletion log in sales order for pricing error

Hi experts,
I have to check the some mandotory pricing conditions in sales order, if that conditions are not exist in sales order then i need to show the information message as well as i need to update it in incompletion log of sales order. (incopletion log we can see on menu bar 'EDIT' or ctrl+F8 on main screen of VA01). So that user can save the sales order but it will be in incomplete status.
I have completed it upto showing the information message using user exit 'MV45AFZZ', but after this i don't know how to update it in incompletion log of sales order for pricing. I tried to update in tables VBUK-UVPRS, but i am not getting the desired result.
Please anyone can tell me how to update it. In which user exit i can update the incompletion log.
Thanks and Regards,
Vicky.

Hi Vinod,
I am sending you my code please check it,
   if TKOMK-SPART = 10.
    if XKOMV is not INITIAL.
      clear v_JEXP.
    READ TABLE XKOMV with key kschl = 'JEXP'.
    if sy-subrc = 0.
      check XKOMV-kwert = 0.
      message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
      v_JEXP = 'X'.
    else.
      message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
      v_JEXP = 'X'.
    endif.
    if v_JEXP = 'X'.
XVBUV-MANDT = sy-mandt.
XVBUV-POSNR = '000010'.
XVBUV-TBNAM = 'VBAP'.
XVBUV-FDNAM = 'PRSOK'.
XVBUV-FEHGR = 20.
XVBUV-STATG = '06'.
XVBUV-FCODE = 'PKON'.
XVBUV-SORTF = 9999.
XVBUV-LFDNR = 0000.
XVBUV-UPDKZ = 'I'.
append XVBUV.
    endif.
endif.
endif.
Please suggest something to solve this.
Thanks and Regards,
Vicky.

How to read pricing conditions on sales order

Hi
i need to retrive pricing conditions of sales order but before posting sales order
any user exit avialable ...?
also i hv found one user exit in that there is FM EXIT_SAPMV45A_003
But i am not able to read pricing conditions values
also no data is there in konv table coz sales order has yet not been post
so before sales order can i read the pricing conditions values ...
pls guide
if possiple pls provide example also
thanks
Taran

Hi
The problem is you can't use the KNUMV, because u make sure to get the princing active in the document at run time.
If you want to know the old data you can read the table KONV using field KNUMV, but here you can't know if some modification is done.
U can try to know the field-symbols:
DATA: XKOMV LIKE KOMV.
DATA: FIELDNAME(30) VALUE '(SAPMV45A)XKOMV[]'.
FIELD-SYMBOLS: <TKOMV> TYPE TABLE.
ASSIGN (FIELDNAME) TO <TKOMV>.
LOOP <TKOMV> INTO XKOMV.
ENDLOOP.
Max

Manual Pricing Condition for sales order!!

Hi,
I have an issue, My requirement is I have to add a manual pricing condition in sales order header level. I have define the pricing condition for Freight Charges and that I have added to the pricing procedure that we have used for the transaction.
The problem is when Iam creating the order in the condition tab manully want to choose the condition type, but what I created condition type (Freight Charges) is not appearing in the view. Only exesting condition types only appearing in tha selection view. I am on CRM Stand alone
Pls anyone can advise where I miss the setting, I am new in CRM PRICING
Regards
VJ

Hello VJ,
You must consider that there is a setting "manual" in the pricing procedure customizing, indicating that the condition must be manually entered, and also a setting in condition type customizing regarding changes that can be made. In condition type customizing you should NOT have option D "Not possible to process manually". Have you checked condition type customizing?
Additionally please execute function module from note 867428 ( IPC_DET_CLEAR_CUST_BUFFER ).
This will ensure that all the customizing changes are immediately available ( otherwise you would need to wait until the automatic buffer refresh occurs, by default once per day
Best Regards
Luis Rivera

User exit or badi to restrict PROO in Sales Order for certain sales organisation

Hi SAP SD experts,
I would like to know the User exit or badi to restrict PROO in Sales Order for certain sales organization. This can be done by making condition type as D but will affect all sales org and we to restrict for a certain sales org only.
thanks,
SG

Kindly explained how you have solved others may benefit..
regards
Arunkumar

How to change pricing Conditions in Sales order in change sales order bapi

Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLN

HI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
Import Paramters:
 SALESDOCUMENT - Sales Document Number
 ORDER_HEADER_INX - UPDATEFLAG as 'U'.
 LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
Tables:
 CONDITIONS_IN - ITM_NUMBER,
 COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is '01'
 COND_TYPE,
 COND_VALUE,
 CURRENCY.
 CONDITIONS_INX - ITM_NUMBER,
 COND_COUNT,
 COND_TYPE,
 UPDATEFLAG as 'U',
 CURRENCY.
 Hope i have clarified your query.
Kind Regards
Eswar

User exit to copy Manual pricing conditions with in sales documents

Hi all,
I have a situation where i have to copy the manual pricing conditions from inquiry to quotation.
Problem: From VA21 when I try to do the same using the tab "create with reference" the document is being copied but the manually set pricing condition in the inquiry is not being copied into quotation. This is because in the copy controls the pricing type is set to 'B' which means "carry out new pricing". I can change it to 'C' or 'D' so that it copies manual pricing but i am not allowed to do so because other sales orgs in the company has a problem if i do so. Only our perticular sales org needs this config. I cannot even create another item catogory specific to this plant because it is against the rules of the company. So I am looking for a user exit in which i can change this pricing type during runtime so that i can plug in some code specific to this sales org to copy manual pricing. I have found one from the SAP note 24832 (MV61AFZA). It doesn't work as i think its obsolte. Can anyone suggest me a better way of solving this issue. Any quick response is appreciated.
Thanks,
Giridhar.

Hi
The following EXITS may help you
Exit Name              Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
V45A0001            Determine alternative materials for product selection
Regards
PRabhu

VL01N user exit to copy pricing conditions from sales order

Does anyone know which user exit could be used to copy sales order line item conditions to delivery note conditions screen.
The sales order screen is SAPLV69A field KOMV-KSCHL
The delivery note screen is SAPLV69A field KOMV-KSCHL
Thanks

Hi,
Just goto include - LV69AFZZ
And Check ..
userexit_pricing_check - USEREXIT_PRICING_CHECK
Thanks

Users autorizations for pricing condition in sales order

HI all,
Can anyone tell me if there is any posibilities to control users autorization for certain pricing condition in a sales order? For example: User A can add/edit/display K007 but user B can only display K007 for a new sales order.
Thanks in advance
GeorgeR

Hi
Please check this link on WIKi
http://wiki.sdn.sap.com/wiki/display/ERPLO/UserexitforRestrictingUserModifyingConditiontypeinSales+Order
regards
Prashanth

Inserting Pricing condition in Sales order when saving the sales order

Dear ABAPers,
My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
How to do this.
Thanks & Regards,
Ashok.

Dear ABAPers,
I have Solved this Problem.
Thanks & Regards,
Ashok.

Authorization Objects for pricing conditions in Sales Order

Hi All,
In transaction VA03, we should restrict some users not to see pricing conditions tab in header and item level and net value on overview screen.
Is there anyone who knows how to do it? I wii be very glad if you help me.
Best Regards.

Hi,
i have not done this exact limitation before, but I hope this method will help.You can look up the list of all authorization objects linked to the tcode in transaction SU22.
You can also get this by doing a user trace in ST01; and displaying the pricing condition.
once you have a rough idea, you can do a trial and error with the values inside these objects and see which one works.
Regards,
Soumya

Delete Pricing Condition IN Sales Order

Hello Forum,
Does anyone know how to delete a specific pricing condition in a Sales Order.
In a sales order for each line item there are multiple pricing conditions. I need to delete a specific price condition 'ZZZZ' for instance then how do I go about it?
This is what I have been able to find out so far.
1. Does NOT seem to be possible by BDC because there is no way to position the cursor on the particular condition record I require.
2. Although there is BAPI_SALESORDER_CHANGE, SAP via an OSS note specifies that this BAPI CANNOT be used to delete condition records.
3. None of the PRICING function modules seems to work for deletion. I did find out a function module PRICING_DELETE_LINE but this seems to rely on being called via SAP Standard function.
I have tried searching for some means to do this and I hope that someone on this forum can give me some help on the same.
Regards,

Hi Peter,
Your reference to OSS Note 593246 saved me from hitting my head to the wall, I had almost given up. Thanks a lot.
Here is the code, in case any one needs to add or change a condition type on the sales order.
REPORT ytest.
DATA:lt_conditions_in TYPE STANDARD TABLE OF bapicond,
     lt_conditions_inx TYPE STANDARD TABLE OF bapicondx,
     lt_return TYPE STANDARD TABLE OF bapiret2,
     ls_logic_switch TYPE bapisdls,
     ls_order_header_inx TYPE bapisdh1x,
     ls_conditions_in TYPE bapicond,
     ls_conditions_inx TYPE bapicondx.
ls_order_header_inx-updateflag = 'U'.
ls_logic_switch-cond_handl = 'X'.
ls_conditions_in-itm_number = '000010'.
ls_conditions_in-cond_type = 'PR00'.
ls_conditions_in-cond_value = '21.11'.
ls_conditions_in-currency = 'USD'.
APPEND ls_conditions_in TO lt_conditions_in.
ls_conditions_inx-itm_number = '000010'.
ls_conditions_inx-cond_type = 'PR00'.
ls_conditions_inx-updateflag = ' '.
ls_conditions_inx-cond_value = 'X'.
ls_conditions_inx-currency = 'X'.
APPEND ls_conditions_inx TO lt_conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
   salesdocument               = '0000053232'
ORDER_HEADER_IN             =
   order_header_inx            = ls_order_header_inx
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
   logic_switch                = ls_logic_switch
TABLES
   return                      = lt_return
ORDER_ITEM_IN               =
ORDER_ITEM_INX              =
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =
SCHEDULE_LINES              =
SCHEDULE_LINESX             =
ORDER_TEXT                  =
ORDER_KEYS                  =
conditions_in               = lt_conditions_in
conditions_inx              = lt_conditions_inx
EXTENSIONIN                 =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait          = 'X'
      IMPORTING
       return         =
Regards
Amit Maole

User exit to add header pricing condition in sales order

Similar Messages

Maybe you are looking for