User Exit to change receiver address - PO
Hello Everybody,
I am working on emailing a PO. In the vendor master I have maintained a few email address, out of which one email address is default.
Now when I create the message output (which is using email) it always picks up the default email address in the vendor master and sends and email on that address.
Now, I have a requirement that I have to pick up an email address which is not default, but has a particular value in the field "Remark". These details are maintained in the table ADRT.
So I have to read this email addres from ADRT and replace the default address with this one,. TO do this I could not find the right user exit.
For this I need atleast the address number in input to the user exit/BTE, since it is the key in table ADRT.
Could you all please halp me to identify the correct user exit / BTE to achieve this.
Thanks a lot in advance !!
Thanks Martin,
I guess that's the same path that I took earlier when using SPRO and looking at the Purchasing->Messages. In my case it's ZMEDRUCK, but that does not help me in regards to controlling the vendors e-mail address being used. When sending the PO as an e-mail it uses (by default) the first e-mail address of the Vendor, whereas the vendor could have multiple ones. In my test case my vendor has two addresses but it always defaults to using the first. I know that I need to modify this behaviour somehow, but how I have no idea as I can find no Exit routine.
Jas
Similar Messages
-
User exit to change shi-from address
Hi Guys,
Help me if you know an user exit for changing ship-from address while creating sale order.
Thanks.Hi
EXIT_SAPLV09A_001
You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address should be created (duplicated).
Hope this may help you
Regards
Srinath -
What user exit to use for Address Delivery in ME53N?
Hi all,
I make a mistake on my last week question. However, it has also added some extra knowledge to me and marks has been given out to respected consultants providing solution to me.
Ok, my correct question should be:
What is the user exit to maintain Delivery Address (CMMDA-ADRN2) in ME53N?
Hope to get some reply from you all as soon as possible.
Thanks,
William Wilstroth
Message was edited by: william wilstrothUser Exit for ME53N,The Bold One below would solve the purpose...and other user exist related to ME53...
<b>Kindly rewards points.</b>
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
<u><b>MM06E010 </b></u> Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
<i><b>MMDA0001 </b></i> Default delivery addresses
MMFAB001 User exit for generation of release order -
User exit to change material availability date
Hi Gurus,
my requirement is like I need to change the material availability date based on some conditions.
Is there any User Exit to change the availability date so that I can dump my code in the user exit .
If not is there any alternative process to get the solution.
Thanks,
Sudhaa.............Hi Sudha,
Can you tell me your requirement clearly please.
Regards,
Dhanunjaya Reddy -
User exit to change item level data in purchase order
Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirment is
For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in itemlevel data.
Regards,
RahulHi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar -
Inbound IDOC User Exit ZXVEDU04 change IDoc Data
Hi all,
We have to develop an user exit for changing the Plant, Shipping Point and Storage location
We have identified the exit ZXVEDU04 . Is there some other exit for this ??
But which internal table we are supposed to change this to change the data .
If possible send me a sample code
Thanks in Advance .
Vivek K ..Hi all,
I have done this for a single line item IDoc .
How do i go for IDocs with more than one line item ???
I have hardcoded VBAP-WERKS(1) etc for Plant, Strg Loc and shp pt .
How to identify how many line items are there in the IDocs ??
Thanks in Advance .
Vivek K .. -
Help - User exit to change item level data in Purchase Order
Hi,
Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirement is For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked). now i cant use ME_PROCESS_PO_CUST because process_item wont get triggered if there is no change in item level data.
Thanks,
RahulHi Rahul,
Probably EXIT_SAPLMEKO_002.
hope it helps,
Edgar -
User Exit for Changing G/L account in Accounting Document
hi all,
This one is urgent for me. If you guys can help.
Iam looking for a user-exit to change the G/L account while posting the accounting document.
If someone has worked on a similar user-exit Kindly help.
Thanks and Regards
VarunHi Experts,
The requirement is to change the GL account when PGI is done for a delivery.
I have coded in the above user exit for changing the GL account. I am facing the issue here.
I am changing the GL account through a user exit, but even before the user exit is called the standard SAP is throwing a error.
the Error is GL account is blocked for posting in the company code. This check is happening for the GL account what standard SAP proposes from the customization. The GL account that is getting picked is blocked in SPRO for posting in the mentioned company code. Because of the error message, our z code is not getting executed.
Kindly suggest if some user exits that can be used even before this error message. or let me know if you have any suggestions to over come this.
I have coded this in the enhancement point. Include MM07MFK0_KONTIERUNG_PRUEFEN and subroutine kontierung_pruefen.
Thanks, -
User exit to change account assignments
Hi gurus!
Can anyone tell me a user exit to change some fields in Logistics Invoice (MIRO), when a an fixe asset PO is made:
BSEG-BSCHL - Posting Key
BSEG-UMSKZ - Special G/L Indicator
BSEG-UMSKS - Special G/L Transaction Type
BSEG-HKONT - General Ledger Account
I apreciate any help, expecially because we already achieved GO LIVE.
Thanks in advance, Pedro MarianoHello Pedro,
We have the same requirement, how did you solve it?
I would really apreciate your help.
Thank you,
Elisa -
Is there any user exit to change the UOM of a material while creating sales
Hi experts,
I have a requirement to change the UOM of the item material in sales order while creating. Could anybody help me in finding the correct user-exit to change the UOM.
Thanks,
srinivas.Hi Ravish,
I am already changing the UOM in the same include and in the subroutine "USEREXIT_MOVE_FIELD_TO_VBAP". But it is again over writing in the standard program. What I need to do, to remain same UOM.
Thanks,
srinivas. -
What is the user exit to change segment version at the run time of an IDOC
Dear Experts
Please can some one help on this ...
Which is the user exit to change segment version at the run time of an outbound IDOC.
For example
Suppose we have a IDOC segment with two version 620 and 46C.
By default the IDOC pick the 620. But Our requirement is to use 46C.
What user exit we can use for outbound IDOC to change the version used at run time for a segment.
Appreciate your response.
ThanksHi,
ALE00001 EXIT_SAPLBD11_001
User exit for the IDOC version changer
Regards,
Ravi -
User Exit to Change Conditions Type into PO
Hi Experts,
Does anybody know a user exit to change of a condition's currency into a Purchase Order?
I need to change currency type of manually entered conditions, so the user exit should be determinated by specifics conditions types and called up during a redetermination of all or individual price components.
I'll appreciate any information.
Best Regards.
JoséUse BADI ME_PROCESS_PO_CUST
-
User exit to change Delivery type
Is there a user exit to change the delivery type when creating delivery wrt a sales order.
Thanks.Use BADI LE_SHP_DELIVERY_PROC
Edited by: abhishek shukla on Sep 24, 2008 12:00 AM -
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco -
User-Exit for changing Sales Document Number - Urgent
Hi Experts ,
Please suggest me the <b>User Exit for changing Sales Document Number.</b>
thanks,
Jayesh<b></b>hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN
Maybe you are looking for
-
Mini dvi to dvi adapter not working with monitor
arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any id
-
How do I locate the source of a random .wav notice in 9.0.1?
There's a chime that pops up randomly, and I have no idea what's causing it or how to stop it. It's very annoying. How can I find it?
-
Please assist with the iMessage configuration. My iMessage used to work with the previous version. With 6.1 I cannot configure iMessage properly. After I sign in using my apple id. It directs me to the next page with all the email add associate
-
Error running command: /usr/java/bin/java: error execing process: Not enough space In a whole root zfs zone the webconsole service fails to start. This is what I get: svc:/system/webconsole:console (java web console) State: maintenance since Fri Aug
-
Annoying application opening when renaming...
There must be a way around this, but it escapes me hence this appeal for ideas.... I am in the process of re-naming hundreds of photo' files and when I click on the file to rename it most of the time the file opens up an image application like Apertu