User exit to change vendor e-mail address used for PO output via e-mail...

We have two vendor e-mail addresses for a particular vendor. Ignoring output determination, it looks like I will need to control which of the two e-mail vendor addresses is used when the PO is output via e-mail.
The default is the first one e-mail address, but for PO's I would like to force the second vendor e-mail address.
There are tonnes of exits available for PO output by the looks of it so I am trying to discover which is relevant for what I am trying to achieve.
Jas
Edited by: Jason Stratham on Apr 30, 2009 5:53 PM

Thanks Martin,
I guess that's the same path that I took earlier when using SPRO and looking at the Purchasing->Messages. In my case it's ZMEDRUCK, but that does not help me in regards to controlling the vendors e-mail address being used. When sending the PO as an e-mail it uses (by default) the first e-mail address of the Vendor, whereas the vendor could have multiple ones. In my test case my vendor has two addresses but it always defaults to using the first. I know that I need to modify this behaviour somehow, but how I have no idea as I can find no Exit routine.
Jas

Similar Messages

  • I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email

    I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email.

    Settings > iTunes & App store.
    Tap AppleID, sign out then sign back in.
    The Apple ID is right everywhere else. I've synced the phone. I've reset it in Settings on the phone. I've changed it at Apple.
    When you write, "I've changed it at Apple, this means you updated yoru old AppleID or you ceated a new AppleID?

  • BADI / USER-EXIT to change Vendor Material Number in ME21n

    Dear Sir,
    We are looking for a BADI/USER-EXIT  in Tcode ME21n , which can change the Value of  "Vendor Material Number" (Vendor Material Number is available under Item Detail in "Material" Tab . The value which need to be populated in the Field "Vendor Matreial Number" is  equal to first 4 character of the Item Code .
    I request the SAP Experts to kindly guide me with a sample Code please .
    I will be highly grateful for the kind help pl .
    Regards
    B Mittal

    Hello B.V.,
    User-Exit:
    First open the relevant Module Pools for ME21n via SE38. Then search for all CUSTOMER_FUNCTION 'xxx' where xxx is a 3 digit number. This number is linked to a User-Exit EXIT_<Module Pool>_xxx. Then investigate this function for it IMPORT parameters. In your case there has to be an interface for "Vendor Material Number".
    For to implement the required changes use the by SAP delivered include ZX<something> inside this function.
    BAdI:
    1. Search in IMG
    2. Find Enhancement Point in the relevant Module Pool.
    Hope this helps,
    Heinz

  • User Exit to change receiver address - PO

    Hello Everybody,
    I am working on emailing a PO. In the vendor master I have maintained a few email address, out of which one email address is default.
    Now when I create the message output (which is using email) it always picks up the default email address in the vendor master and sends and email on that address.
    Now, I have a requirement that I have to pick up an email address which is not default, but has a particular value in the field "Remark". These details are maintained in the table ADRT.
    So I have to read this email addres from ADRT and replace the default address with this one,. TO do this I could not find the right user exit.
    For this I need atleast the address number in input to the user exit/BTE, since it is the key in table ADRT.
    Could you all please halp me to identify the correct user exit / BTE to achieve this.
    Thanks a lot in advance !!

    Thanks Martin,
    I guess that's the same path that I took earlier when using SPRO and looking at the Purchasing->Messages. In my case it's ZMEDRUCK, but that does not help me in regards to controlling the vendors e-mail address being used. When sending the PO as an e-mail it uses (by default) the first e-mail address of the Vendor, whereas the vendor could have multiple ones. In my test case my vendor has two addresses but it always defaults to using the first. I know that I need to modify this behaviour somehow, but how I have no idea as I can find no Exit routine.
    Jas

  • MIRO User - Exit to Change the Profit Centre..?

    I need to change the Profit Centre in the Accounting document(for Vendor Line Item) and Profit Centre Accounting Document(For Payable Line Item) Created by MIRO Transaction.Can any one let me know if there is anyuser-exit or badi to achieve the same
    Thanks a lot for your help .
    Regards,
    Gopi.K

    hi
    These are all the user exits avalilable for MIRO transaction.
    LMR1M001            User exits in Logistics Invoice Verification
    LMR1M002            Account grouping for GR/IR account maintenance
    LMR1M003            Number assignment in Logistics Invoice Verification
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs
    LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006            Logistics Invoice Verification: Process XML Invoice
    MRMH0001            Logistics Invoice Verification: ERS procedure
    MRMH0002            Logistics Invoice Verification: EDI inbound
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP
    MRMN0001            Message output and creation: Logistics Invoice Verification
    I think you can use this exit.
    LMR1M002 
    Regards.
    Lavanya.

  • After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

    After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
    <Email Edited by Host>

    Welcome to the Apple Community.
    I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    Apple Topluluk hoş geldiniz.
    Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
    Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
    Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
    Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
    Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
    Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

  • User exit to change an output type

    Hi,
    Is there any user exit to change the output type instead of another one when the user tries to print a sales order?
    Thanks in advance.
    Ricard.

    Hello,
    for example you have 2 message types
    1) ZOUT1  (Zprogram1 or Scirpt or Smartform what ever)
    2) ZOUT2  (Zprogram2 or Scirpt or Smartform what ever).
    For example based on Vendor Type you want to trigger ZOUT1 & ZOUT2.
    what you have to do is.
    Goto VOFM  -> Requirements -> Output Control -> Create 2 routines for each output type. then go to Code part of each routine make subrc = 4 if you dont want to execute output type.
    subrc = 0 implies output will execute else vise versa.
    let me know if you dont understand my solution.
    ***********Poorna***********

  • User exit  to change material availability date

    Hi Gurus,
       my requirement is like I need to change the material availability date based on some conditions.
    Is there any User Exit to change the availability date so that I can dump my code in the user exit .
    If not is there any alternative process to get the solution.
    Thanks,
    Sudhaa.............

    Hi Sudha,
    Can you tell me your requirement clearly please.
    Regards,
    Dhanunjaya Reddy

  • User exit to change item level data in purchase order

    Hi,
    Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirment is
    For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked).   now i cant use ME_PROCESS_PO_CUST  because process_item wont get triggered if there is no change in itemlevel data.
    Regards,
    Rahul

    Hi Rahul,
    Probably EXIT_SAPLMEKO_002.
    hope it helps,
    Edgar

  • Help - User exit to change item level data in Purchase Order

    Hi,
    Can anyone let me know the user exit to change item level data in purchase order . there is a badi ME_PROCESS_PO_CUST for this but the issue is its method process_item gets triggered only when the item is changed. My requirement is For purchase order document types u201CZSOu201D and u201CZCOu201D, where the purchase order is a u201CLimits Orderu201D only i.e. no materials or services on the purchase order, the print price indicator field should be set to u201Cblanku201D (unchecked).   now i cant use ME_PROCESS_PO_CUST  because process_item wont get triggered if there is no change in item level data.
    Thanks,
    Rahul

    Hi Rahul,
    Probably EXIT_SAPLMEKO_002.
    hope it helps,
    Edgar

  • User exit to change account assignments

    Hi gurus!
    Can anyone tell me a user exit to change some fields in Logistics Invoice (MIRO), when a an  fixe asset PO is made:
    BSEG-BSCHL - Posting Key
    BSEG-UMSKZ - Special G/L Indicator
    BSEG-UMSKS - Special G/L Transaction Type
    BSEG-HKONT - General Ledger Account
    I apreciate any help, expecially because we already achieved GO LIVE.
    Thanks in advance, Pedro Mariano

    Hello Pedro,
    We have the same requirement, how did you solve it?
    I would really apreciate your help.
    Thank you,
    Elisa

  • Is there any user exit to change the UOM of a material while creating sales

    Hi experts,
    I have a requirement to change the UOM of the item material in sales order while creating.  Could anybody help me in finding the correct user-exit to change the UOM.
    Thanks,
    srinivas.

    Hi Ravish,
    I am already changing the UOM in the same include and in the subroutine "USEREXIT_MOVE_FIELD_TO_VBAP".  But it is again over writing in the standard program.  What I need to do, to remain same UOM.
    Thanks,
    srinivas.

  • HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

    Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • What is the user exit to change segment version at the run time of an IDOC

    Dear Experts
    Please can some one help on this ...
    Which is the user exit to change segment version at the run time of an outbound IDOC.
    For example
    Suppose we have a IDOC segment with two version 620 and 46C.
    By default the IDOC pick the 620. But Our requirement is to use 46C.
    What user exit we can use for outbound IDOC to change the version used at run time for a segment.
    Appreciate your response.
    Thanks

    Hi,
    ALE00001      EXIT_SAPLBD11_001         
    User exit for the IDOC version changer
    Regards,
    Ravi

  • User Exit to Change Conditions Type into PO

    Hi Experts,
    Does anybody know a user exit to change of a condition's currency into a Purchase Order?
    I need to change currency type of manually entered conditions, so the user exit should be determinated by specifics conditions types and called up during a redetermination of all or individual price components.
    I'll appreciate any information.
    Best Regards.
    José

    Use BADI ME_PROCESS_PO_CUST

Maybe you are looking for