User exit to make 262 movement go to QI rather than unrestricted status?

Hi Gurus,
In our system, we use "rework" production orders to occasionally rework Finished product.
The same finished product code is used (261) and returned (101).
Sometimes a 262 is used to retrieve unused Finished product back from the production order.
However this naturally places it back in unrestricted status.
What I'm being asked to investigate is whether there is anyway using the ABAP user exits
to influence the 262 movement,during the transaction, for certain finished product only,
so that the product ends up in Quality status - this is considered important
to ensure the product is not shipped as it was only released to enter the rework order.
On occasion the 262 is done in error, and in this case it would be especially useful!
Having looked through the material doc user exits, and done a search on the forum,
I don't think this is possible ABAP-wise,SAP intends a 262 to go to unrestricted and that's it..
I'm thinking of instead creating a bespoke authority object, to be checked under the above logic,
so that only certain qualified users will be able to do this operation -
but I want to throw the question out to forum before I resort to that..
Thanks for any help/ideas,
Paul

Dear Paul,
When the finished goods are found to be defective and needs to be reworked, first move the finished goods to a seperate st location (which is not relevant for MRP planning and not relevant for sales delivery. This by this the defective material is protected from being consumed or delivered).
Then create a rewind production order (or a rework production order) and issue the defective material against the production order and start the rework.
I am thinking what you said is not possible through user exit (there is a BADI MB_DOCUMENT_BEFORE_UPDATE or MB_DOCUMENT_UPDATE for material document movement) but you'll not be able to influence the stock to put in the quality.
Thanks
Nagarajan

Similar Messages

User Exit to make Payment Term field non editable in item level .

Hi all,
User wants to make the Payment Term field in sales order as non editable and Payment terms is copied from Customer Master to Sales order.
I use user exit MV45AFZZ (USEREXIT_FIELD_MODIFICATION) to make Payment Term field non editable in header level.
I am not able to do it in item level. Pl help to to make Payment Term field non editable in item level.
Thanks,
sunil

Hi,
You can try implicit enhancement in the include MV45AF0T_TCTRL_U_ERF_AUFTRAG_I
use below code.
DATA: WA_COLS LIKE LINE OF TCTRL_U_ERF_AUFTRAG-COLS.
   LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
   IF WA_COLS-SCREEN-NAME = 'VBAP-ZTERM'. " Check the field name
   WA_COLS-SCREEN-INPUT = 0.
   WA_COLS-SCREEN-OUTPUT = 1.
MODIFY TCTRL_U_ERF_AUFTRAG-COLS FROM WA_COLS.
   ENDIF.
ENDLOOP.
It better to control it via a custom authorization object.
put a authorization create a custom authorization object so that you can restrict it for a certain users.
AUTHORITY-CHECK OBJECT 'ZTERM'
         ID 'ACTVT' FIELD '02'.
IF SY-SUBRC NE 0.
   LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
ENDLOOP.
ENDIF.
Regards
Aromal

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

User Exit   in MB11 / GOODS MOVEMENT +_+_+

Hi experts,
I have a requirement where I need to know the User exit in MB11.
My requirement is such that when a goods mvmt 261 is done using MB11, It should call a special function (custom program) using a Userexit.
Or a general user exit in goods movement if not (MB11 specifically), so that I can trigger this call for special function.
Any info is greatly appreciated.
Thanks
Preeti
MB1C, MB11, Goods movement.

Check these BADIs:
MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL                    BAdIs when Creating a Material Document (SAP Internal)
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_DOCUMENT_BADI                        BAdIs when Creating a Material Document
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04                         posting of gr
MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE                     Archive AddOn-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK                     Check AddOn-Specific Criteria for MM_MATBEL
Rob

User exit in CO11N ,goods movement specific component can split for batch

Hi experts
When system going to production confirmation by CO11N . now user go to goods movement button , here i want to know user exit,here component line item is batch active or not so i can allow or validate . at that time if component is batch active then user can split qty batch wise else validate (you can not change & exit).
Much regards .
Anup shukla

Check these BADIs:
MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL                    BAdIs when Creating a Material Document (SAP Internal)
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_DOCUMENT_BADI                        BAdIs when Creating a Material Document
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04                         posting of gr
MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE                     Archive AddOn-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK                     Check AddOn-Specific Criteria for MM_MATBEL
Rob

Exiting Sharepoint Calendar event back to same time rather than today

I'm in a Sharepoint 2013 online Calendar using Calendar View. I navigate to an event in the past (or future) and open it. I click Close. Instead of returning to the day/week/month I was at before opening the event, I am returned to today's date. I then have
to navigate back to the time of the event.
Is there any way of exiting the event popup back to the calendar date of the event, rather than today?
Jonathan

Hi,
According to your description, you want to navigate to the correspond date after closing an event in the past (or future) of a Calendar.
When we close an event in the past (or future) of a Calendar, it will refresh the page, by default, navigate to the current date.
I recommend you that use New Event, View Event, Edit Event to add, view, Edit Event in calendar list. Then you will open the form in a dialog, when you close the dialog, it will still stay at the past (or future) date.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Sales order user exit to make item quantity zero

Hello friends ,
Here is my requirement . When I am creating or changing the
sales order I need to check wether the material is discontinued
or not and if discontinued and if discontinued I need to make the
quantity as zero . Can you please hekp me out with this .
We are on version ECC 5.0
Can anyone tell me if this will resolve my issue .
<b>userexit_save_document_prepare</b>
Thanks ,
Varun .

Hi alll ,
Finally I had my code in this way in the exit : USEREXIT_SAVE_DOCUMENT_PREPARE
Here is my code :
data wmvke like mvke .
field-symbols : <f_xvbap> type VBAPVB .
loop at xvbap assigning <f_xvbap>.
select single * from mvke into wmvke where matnr = xvbap-matnr and
                               vkorg = vbak-vkorg and
                               vtweg = vbak-vtweg and
                               vmsta = '30' .
    if sy-subrc eq 0 .
    <f_xvbap>-kwmeng = <f_xvbap>-kwmeng * 0 .
    <f_xvbap>-updkz = 'U' .
    <f_xvbap>-abgru = 'PR' .
*    modify xvbap .
    endif .
endloop .
In the debug mode while saving the sales order I can see the process going through the code and table xvbap getting executed . But still I do not have any idea on why it is not reflected when I comeout from the debug mode .
Please help me with this .
Thanks ,
Varun .

User exit to make the field 'Long text for UD' as mandatory

Hi Gurus,
My requiremen is that while doing UD, I need to make the field 'Long text for UD' as mandatory for the rejected materials
pls suggest.
Thanks
Ganesh

Hi,
U can use the badi ME_PROCESS_PO_CUST methid PO PROCESS_ITEM. In this u have both doc type and line item data and using this u can through the error message to make the field compulsory.u can go to the 'Goto' in menu and in this go to 'Sample code' .Here u will find how to use this badi.

User Mailbox after sync showing in Contacts in ECP rather than Mailboxes in ECP

Hi Team,
We have hybrid exchange configuration. User object is created in on-premise, mailbox for user created in O365. We were having some sync issues for the changes that we were doing in AD for that user.
We are facing issue in user mailbox after removing the on cloud object. What we did is:
1. Used command Remove-msoluser [email protected]
2 Used command Remove-msoluser [email protected] -removefromrecyclebin
3. We then waited for sync, after sync the mailbox was not visible in Mailboxes rather it was visible in Contacts in ECP.
Please assist us in this issue.

Hi Vasil,
Below are the outputs:
1.
Get-Recipient [email protected] | fl *RecipientType*
RecipientType : MailUser
2.
Get-Mailbox [email protected] | fl *RecipientType*
The operation couldn't be performed because object '[email protected]' couldn't be found on 'xxxxxxxxx.xxxxxxxx.prod.outlook.com'.
    + CategoryInfo          : NotSpecified: (:) [Get-Recipient], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=Dxxxxxxxxx,RequestId=0000000-0000-0000-0000-0000000000,
   TimeStamp=3/26/2015 12:01:27 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] F1
A2F66B,Microsoft.Exchange.Management.RecipientTasks.GetRecipient

How do I make Iphone proritise answering with bluetooth rather than ringing on phone?.

Previously, when I received a phone call in my car, the bluetooth radio would ring and then I would take the call by pushing button on steering wheel. Ever since installing latest IOS the bluetooth device connects but the phone just vibrates (doesn't even ring) The radio shuts off but the audio ring does not sound. Have to answer the phone manually. Defeats the purpose of having handsfree!! I note that when I phone voicemail while in car the screen shows options to use bluetooth, Iphone or speaker phone. When I am in the car I JUST want to use handsfree bluetooth (it is the LAW!!). Is this just a glitch in the new operating system update? and if so, when will it be repaired?

You can't. If iPhoto is open when you connect the phone then it will offer itself from importing.
Regards
TD

Additional User Exits For Special Ledger Extraction

Hi,
I have a requirement to append 2 additional fields to data extracted for a 3fi_sl_xx_tt datasource.
I was planning on using the standard transactional data user exit. However a consultant we have on site has suggested there is another user exit available prior to the data being extracted. He suggests that this will allow me to retrieve the additional data at the same as all the other data and therefore prevent having to loop around what could be a large internal table in the standard exit.
Does anybody know if this is possible/feasible or even how I might check if an exit is avaialable.
Any help much appreciated.
Simon Bailey

Hi Simon,
Is the consultant referring to the user exit for populating into the FI-SL table rather than populating the extractor during the data pull from SAP BW ?
It is very likely he is talking about using the user exit for populating the FI-SL tables using the user exit RGGBS000 or ZRGGBS000(generally coped to a Z).

CO11N User exit control

Hi,
I don't capture user-exits when press Goods Movements (sy-ucomm = MB03) and Save buttons in transaction CO11N.
I use the following user-exit:
FUNCTION EXIT_SAPLCORF_102 >>> Include ZXCOFU12
Can you help me please.
Screen Image: http://i53.tinypic.com/2ef2rtv.jpg
Best Regards.

Im not creating blank message
i use the a term but the problem is, when i first hit save button and see the error message,than i hit enter button to pass the message and make the input fields editable again. But sy-ucomm is still equal to BU so it show the message again and again and i cant return to normal input screen. And if i make the message type 'S' i cant block the saving process.
I have to option first i will use type E message but i have to get over the problem above, or i will use type 'S' message but i have to stop the transaction after this message. I used type E like S or type S like E. They didnt work.

FIND BADI OR USER EXIT FOR TRANSACTION CORK -STEP SAVE CONFIRMATION

Hi all .
I need to find a badi or user exit to make some w/h movements on action "save confirmation"
in transaction CORK .
Please ,your help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Helena

CONF0001            Enhancements in order confirmation
CONFPI01            Process order conf.: Calculate cust.specific default values
CONFPI02            Process order confirmation: Customer spec. input checks 1
CONFPI03            Process order conf.: Cust. spec. check after op. selection
CONFPI04            Process order conf.: Customer specific input checks 2
CONFPI05            Process order conf.: Cust. spec. enhancements when saving
CONFPI06            Process order confirmation: Actual data transfer
CONFPM01            PM/SM order conf.: Determine cust. specific default values
CONFPM02            PM/SM order confirmation: Customer specific input checks 1
CONFPM03            PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04            PM/SM order conf.: Customer specific input check 2
CONFPM05            PM/SM order conf.: Cust. specific enhancements when saving
CONFPP01            PP order conf.: Determine customer specific default values
CONFPP02            PP order conf.: Customer specific input checks 1
CONFPP03            PP order conf.: Cust. specific check after op. selection
CONFPP04            PP order conf.: Customer specific input checks 2
CONFPP05            PP order conf.: Customer specific enhancements when saving
CONFPP06            PP Order Confirmations: Actual Data Transfer
CONFPP07            Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01            PS confirmation: Determine customer specific default values
CONFPS02            PS confirmation: Customer specific input checks 1
CONFPS03            PS confirmation: Customer specific check after op. selection
CONFPS04            PS confirmation: Customer specific input checks 2
CONFPS05            PS confirmation: Customer specific enhancements when saving
No of Exits:         24

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Populating cost center automatically by Ts code WVFB - Which user exit ?

Hi experts,
I want to populate cost center and to do 'k' assignment automatically using WVFB for Sotre Order creation.
Which user-exit should be activate? thanks a lot in advance.
( the purpose is when user create a store order by transaction code WVFB , the fields of 'k' assingment and cost center don't need to be filled out, an user exit should make 'k' assignment & fill out cost center KOSTL. I just need to know this user exit).
EXIT_SAPLWVFB_002 will be good for my problem? please advice. thanks.

Yes. I solved my problem.
EXIT_SAPLWVFB_002 was used to do it.

User exit to make 262 movement go to QI rather than unrestricted status?

Similar Messages

Maybe you are looking for