User exit to triger after PGI (Post Goods Issue)..
Hi,
Can any one help me on this........... Plz .. Urjent...
I want to make some operation after PGI and I want to find out the user exit to triger after PGI... I dont know How to find out that exact .. Can any one help me on this ...
I want the User exit that triger after PGI...
Regards,
Raghunath.S
Hello Sudha,
Once the PGI ( Post Goods Issues ) over then I want to do some operation .. for that I want to find out the user exit where I can write some logic and process after the PGI...
Can you help me on this Plzzzzzzzzzzzzz....
Similar Messages
-
Hi ,
I want to find out an user exit to trigger after PGI (MIGO) I want to do some operation after PGI.
I have to close this Issue with in 1 day.. I have to add the login in that exit also...
Plz can any one help me out on this Urjent....Hello Sudha,
Once the PGI ( Post Goods Issues ) over then I want to do some operation .. for that I want to find out the user exit where I can write some logic and process after the PGI...
Can you help me on this Plzzzzzzzzzzzzz.... -
User Exit to trigger after PGI
Hi,
Can any one help me on this........... Plz .. Urjent...
I want to make some operation after PGI and I want to find out the user exit to triger after PGI... I dont know How to find out that exact .. Can any one help me on this ...
I want the User exit that triger after PGI...
Regards,
Raghunath.SHello Sudha,
Once the PGI ( Post Goods Issues ) over then I want to do some operation .. for that I want to find out the user exit where I can write some logic and process after the PGI...
Can you help me on this Plzzzzzzzzzzzzz.... -
How to block PGI(posting good issue) only!
Hi,
when end-month closing, we want to block PGI(posting good issue) and can not let warehouse person to do PGI.
How we can do? block Vl02N? or block move type:601? because we just want to block PGI, other Tcode and operator can be used.
Thanks!Another alternate method beside as i said earlier, you can write the following coding in user exit MV50AFZ1 , FORM USEREXIT_SAVE_DOCUMENT.
Before writting prog ,customise one entry in Z table .
SELECT SINGLE * FROM Ztable CLIENT SPECIFIED
WHERE MANDT = SY-MANDT AND Ztable-fieldname = 'ABC'.
IF SY-SUBRC = 0 AND SY-UCOMM = 'WABU_T'.
CHECK NOT SY-TCODE = 'VL02N'.
CHECK NOT LIPS-BWART = '601'.
ENDIF.
So , whenever you want to block the PGI , you need to maintain the entry in Ztable and when u do not want you delete the entry in Ztable .
Take a help of ABAPer and add this , your problem will be solved 100%.
Please give your feed back .
saravanan -
Exception in CRM system after creating post goods issue in ECC
Hi Folks,
We are facing an issue in CRM system. I will tell the scenario in details so that it would be helpful to understand,
We are creating sales order in CRM system and it got replicated to ECC correctly. We have maintained action definition to trigger email to the customer.
Then we will be creating delivery and then post goods issue(PGI) for items replicated to ECC systems. After PGI system will update the status in CRM sales order and here configured an action definition to trigger an email to customer.
We have created custom badi implementations for action definition execute badi to send email. Emails are triggering correctly but after PGI creation while replicating the changes from ECC to CRM we are getting an exception in standard code because PPFTTRIGG table does not have entry. We have failed entry in CRM inbound queue and then did some debug and come to know the place of issue. Help me out with some inputs here.
Best Regards,
Dharmakasi.Hi,
I have identified one thing here, if the action definition does not have start condition system is not updating that entry in PPFTTRIGG table. Here i got 2 questions my mind
1. Why system is not updating the table with all the action definitions available in action profile
2. Why system is looking for the entry which was not updated in PPFTTRIGG table?
I do not understand problem with updating table or with action profile itself. Please give some input here. If we deactivate all the definitions which does not have start condition then there is no error.
Best Regards,
Dharmakasi. -
Badi or User exit to modify MSEG data during Goods issue
Hello,
I have a requirement to modify the field plant MSEG-WERKS while doing goods issue of outbound delivery via transactiona VL02N.
Can anybody suggest me which BADI or user exit should i use.I have searched the SDN and all the previous threads on this haven't yeild any solution for this.
I have tried with below listed Badis and enhancements which wont work.
Badi
===================
MB_DOCUMENT_BADI
MB_MIGO_BADI
LE_SHP_GOODSMOVEMENT
DELIVERY_PUBLISH
Enhancements
===============
MB_CF001
MBCF0005
Thanks and Regards,
KoustubhHi,
I am facing a similar issue of updating the MSEG-DMBTR field when Post Goods reciept is done in VL02n.
I hav tried to update the value in LE_SHP_GOODSMOVEMENT BADI and tried to modify the structure .
eg in this way
method IF_EX_LE_SHP_GOODSMOVEMENT~CHANGE_INPUT_HEADER_AND_ITEMS.
data: wa1 type LINE OF shp_imsegvb_t. "IMSEGVB.
DATA: flag TYPE c.
LOOP at CT_XIMSEG INTO wa1.
wa1-dmbtr = '12345'.
MODIFY CT_XIMSEG FROM wa1.
" TRANSPORTING dmbtr.
flag = 'x'.
ENDLOOP.
endif.
endmethod.
The value gets updated in the structure but when the material document gets created then the table MSEG has the amount DMBTR field not changed.
Also, I tried doing the updation in the Function eXit : EXIT_SAPMM07M_001 by the method mentioned in different threads:
betweeb statemnet if sy-tcode = 'VL02n'
FIELD-SYMBOLS: <DMBTR> TYPE any,
<DMBTR1> TYPE any.
ASSIGN '(SAPMM07M)MSEG-DMBTR' TO <DMBTR>.
assign (<DMBTR>) to <DMBTR1>.
But still on save of the material document in MSEG I cannot find the new DMBTR field value.
Kindly help me on this, urgently required. I have already gone through the number of threads in the forum, but no solution. -
hi Experts,
i have taken 5 materials in my sales order, and do PGI via VL01n for 3 materials.
after that we got some error in my Delivery Documents, so i reverse my Delivery document by using Tcode VA09,
after reversing, we have an option to change the Quantity of material or reduce the number of material,
but the problem is that, now i want to include the remaining 2 materials in my same delivery document.
can i do this, if YES then how?
thanks and regards,
Vishal SinghDear,
In VL02 on the top click on DELIVERY DOCUMENT -- DELIVER SALES ORDER -- PUT ORDER NO. and also give selection for
Line ITEM in pop screen.
Regards
AJIT K SINGH
HAPPY TO HELP U
Edited by: AJIT K SINGH on Dec 22, 2009 5:46 PM -
Need User Exits for Creation of Delivery and for Posting Goods Issue
Hi,
I need User Exits for
Creation of Delivery
Posting Goods Issue
I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
Thanks in advance,
Will reward,
MindaugasIn the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
You can find this user exit (form routine) in include MV50AFZ1.
Hope that helps,
Michael -
Hi,
Could anybody give me the steps to create test data for post goods issue to sales order.( general stpes in brief)
Regards
SaiHi Sai,
PGI (Post Goods Issue) is done after picking.
Picking is done after the delivery.
Once PGI is performed the stock of the material get reduced.
So in the sales process,
Sales Order -> Delivery -> Picking -> PGI.
Kindly, check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560a80545a11d1a7020000e829fd11/frameset.htm
below are the steps to create test data.
1)create a sales order based on your condition from va01(OR,RO Etc..) then save the order.
2)Now from va02 go to inside of the va02 then from menu bar sales document-->deleiver.
3) Now From vl01n eneter the shippment point band save now delievry number will come.
4)from vl02n u click on POST GOODS ISSUE TAB.
Regards
Kiran Sure -
One SO but I would like Post Goods Issue from different Storage Locations?
Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy -
User exit/routine for post goods issue
Dear all,
I want to stop printing of delivery chalan from a replinshment delivery before post goods issue /actual goods movement.Can anuone suggest me for some user exit or routine that stops printing of delivery chalan from a replinshment delivery(VL10B) untill the post goods issue takes place in stock transfer scenario?
Is there any possibility to put some routine in the output of delivery chalan which displays a message that printing of delivery chalan is not possible since post goods issue has not taken place & system do not allow the printing from replinshment delivery unless PGI tales place in stock transfer scenario.
I will be highly greatful to you.
regards
vikas chhabra
[email protected]
[email protected]Dear all,
I want to stop printing of delivery chalan from a replinshment delivery before post goods issue /actual goods movement.Can anuone suggest me for some user exit or routine that stops printing of delivery chalan from a replinshment delivery(VL10B) untill the post goods issue takes place in stock transfer scenario?
Is there any possibility to put some routine in the output of delivery chalan which displays a message that printing of delivery chalan is not possible since post goods issue has not taken place & system do not allow the printing from replinshment delivery unless PGI tales place in stock transfer scenario.
I will be highly greatful to you.
regards
vikas chhabra
[email protected]
[email protected] -
USER-EXIT for post goods issue
Hi all,
after the delivery (VL01n)is created, i have to go for post goods issue.there is a push button named 'post goods issue' in VL02n.
when i will press this button,all my data for this delivery ,should be downloaded to a text file.
for this thing, i want to use a USER-EXIT.can u plz advice me the correct & specific user-exit for this requirement.it is very urgent. i have to it by today.
your help is highly appreaciated.
Regards
pabitraCheck the following
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of stock for POs for shipping due date list
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Regards -
BADI or User Exit for Post Goods Issue Reverse (VL09)
Hi,
Could you please let me know any BADI/User Exit which will trigger while doing Post Goods Issue Reverse through VL09 transaction.
Thanks,
SandeepHello,
If you can be specific about your requirement, then response can be better.
Still, check with following Exit:
- V50R0001 Collective processing for delivery creation
- V50R0002 Collective processing for delivery creation
- VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
- VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
- V50S0001 User Exits for Delivery Processing
Thanks & Regards
JP -
User Exit for "Serial Number" in VL02N before "Post Goods Issue".
Hi Friends,
Current Scenario:
End User has to scan "Serial Number" for Main Unit (Item CAtegory - TAN) while doing "Outbound Delivery". But, sometimes he forget to do this activity of scanning "Serial Number". And do "Post Goods Issue" without "Serial Number".
Requirement:
When End user will click "Post Goods Issue", system should first check "Serial Number" for Main Unit (Item Category - TAN). If he will not find "Serial Number" then system should give warning message for "Serial Number".
Please suggest the suitable "User Exit" that can be used for above purpose.
Or if there is any other way then let us know.
Regards
Sivahi
check is there any standard User Exit available for VL02N. apply your logic and activate -
EXIT or BADI for Post Goods Issue
Hello Experts,
I need help in finding a USER EXIT, or BADI to change the contents of MSEG at PGI moment in VL02N.
I'm using version 4.6c.
When I click at Post Goods Issue, I need to insert the customer number at MSEG for certain documents that the standard does not use this field.
Can anyone PLEASE help?
Will reward points!
Thanks a lot and regards,
FernandaHi
Enhancement/ Business Add-in Description
Enhancement
V02V0004
User Exit for Staging Area Determination (Item)
V02V0003
User exit for gate + artl staging area determination (headr)
V02V0002
User exit for storage location determination
V02V0001
Sales area determination for stock transport order
VMDE0004
Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003
Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002
Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001
Shipping Interface: Error Handling - Inbound IDoc
V53W0001
User exits for creating picking waves
V53C0002
W&S: RWE enhancement - shipping material type/time slot
V53C0001
Rough workload calculation in time per item
V50S0001
User Exits for Delivery Processing
V50R0004
Calculation of Stock for POs for Shipping Due Date List
V50R0002
Collective processing for delivery creation
V50R0001
Collective processing for delivery creation
V50Q0001
Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT
Delivery: Item Status Calculation
Business Add-in
DELIVERY_PUBLISH
Announcement of delivery data during database update
If it is helpful rewards points
Regards
Pratap.M
Maybe you are looking for
-
Can I suppress formatting in getDate()?
I'm getting a "Date" by using the getDate() method. That's fine. What's not fine is that when I display the date on a web page (using c:out) I get a date with dashes in it. So instead of 20070601, I see "2007-06-01". That's problem because you can't
-
Ipod can be seen by Windows 7, but not seen by Itunes.
Hi - A friend has a Dell laptop running Windows 7. It was recently in the shop to remove a virus. Everything now works fine, except it won't work with any of her ipods. The ipods can be seen under Devices and Printers, and by the Device Manager.
-
What are the new pricing and fees for Cs6?
What will I be forced to pay to keep upgrading my Master Collection to the next version (Cs 6)? Can I still purchase Dvd's and install the software on my own computer or will I be forced to move to the non-safe cloud? Where my hardwork can be hacked
-
Hi, I have a question on the service that we are writing for the ESB. We are doing some simple transformations on the messages that the ESB consumes through AQ, then outputs to various end points(file adapter, soap adapter, DB adapter) after going th
-
Flash unescape vs. php urlencode
Hi, the thing is more or less like this: i am sending from some flash app some text to be stored in a database. before i keep it in the database, in the server side, i escape (or in this case i urlencode, the server script is in php). it stores the e