User exit to update characteristic attributes in sales order

Hi all,
I am having one queer requirement.
We are having variant configuration. We are manufactiuring a material which is having lenght as one of the characteristic.
While creating the sales order the user will enter the value against length. This we have to pull in the inspection lot with range.
For ex. if the length required by customer is 1000 mm then depending upon the tolerance limit say +/-1.5 %, another characteristic should get updated with the allowed range (here in this example the lower range 985 and upper range 1015) against another characteristic.
This characteristis will sever as class characteristic for QM master inspection characteristic.
Here the problem is the functionality can't be mapped with object dependency in satandard SAP (you can't derive range with object dependency), so I am looking for user exit to update the second characteristic depending upon the value of first characteristic and allowed percentage.
The user exit should be effective for sales order creation as well as sales order change.
Please help.

Hello Nikhil,
I am looking for the tolerance limit to upadte against one char only and not two separate chars.
If the range is against only one char (and that too again in numeric format and not characteristic format) same shall can be pulled against master inspection characteristic in inspection lot.
Looking forward for the soution.
Mimiri

Similar Messages

User exit for updating delivery block of Sales order before Delivery

Hi Folks,
Need to have an user exit for updating Delivery Block indicator for a Sales order Before creating its delivery
I have got an exit in Program SAPMV45A
MV50AFZ1
FORM USEREXIT_REFRESH_DOCUMENT.
that hits before processing the delivery block fro delivery (Correct me if i m wrong with this )
Now i want now how to change the Delivery Block indicator of Sales order in that exit
any FM available ?
Thanks n regards
Sonal...

Hi ,
How did you solved this issue?
I am having similar scenario in which while pressing the save button delivery block should update if multiple schedule line exist.
Tried by two different approaches in various user exit without any success.
AFAIK we have two ways to achieve this functionality.
1) Count the no of rows in vbep. If greater than 1 then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
This is not correct. If there are two line items both with single schedule line . This case total no lines in vbep will 2 and above condition will true which is incorrect.
2) There is a indicator for multiple schedule line (VBAPD-EPMEH , xvbap-epmeh ) if it is check then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
If I write code in USEREXIT_SAVE_DOCUMENT_PREPARE.
Multiple schedule line indicator is not populate so can not use 2nd approach.
If I write code in USEREXIT_SAVE_DOCUMENT it of no use as vbak is updated before reaching this user exit.
If I write code in USEREXIT_MOVE_FIELD_TO_VBAK as this user exit is also called while pressing the enter key for this I have use
the condition of fcode but it also fails in some condition.
If fcode eq 'SICH'.
Read table xvbap with key epmeh = 'X'.
IF SY-SUBRC = 0.
VBAK-LIFSK = '03'.
Else.
VBAK-LIFSK = ' '.
Endif.
Endif.
Please help me to get the desired functionality working for all cases.
1) One line item with multiple schedule line
2) Two line item with multiple schedule line
3) One line item having one schedule line and second one having multiple
4)Two line item both with single schedule line.

User exit to copy the data from sales order to billing document

hi everyone,
Is there an user exit to copy the data from sales order to billing document?
Regards
Prabudh

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

VL01N user exit to copy pricing conditions from sales order

Does anyone know which user exit could be used to copy sales order line item conditions to delivery note conditions screen.
The sales order screen is SAPLV69A field KOMV-KSCHL
The delivery note screen is SAPLV69A field KOMV-KSCHL
Thanks

Hi,
Just goto include - LV69AFZZ
And Check ..
userexit_pricing_check - USEREXIT_PRICING_CHECK
Thanks

User exit for setting tax indicator in Sale order

Hi All,
I want to know if there is a way (user exit) that could look at the Sales Order Type , particular Item Pricing Condition and Ship-to party State and set the materialu2019s tax classification (VBAP/TAXM1) to u201C0u201D (Exempt) ?
Thanks in Advance!
Sonali.

Hi Ramesh,
I have put the code in the user exit, and I am able to set the tax classification indicator but I have a problem... Before setting the indicator I need to check for the Usage code of the line item (This code I am using instead of checking the Pricing condition) . I am able to read all the values of line item in VBAP structure in the user exit except for the first time this user exit is hit as soon as a line item is entered it is not picking up the Usage code. That field is blank.
But if add another line item and go into the user exit I can see the previous line item Usage code in XVBPA table.
Do you have any idea why usage code is missing in VBAP structure in the user exit or is there any other table or structure where I can get the usage code?
Thanks in Advance!
Sonali.

User exit for additional data B for sale order item .

Hi., all
my client requirement is
( This business requirement will make the Last Price for a given item be visible during order entry. )
u2022Retrieve & display during order entry, the most recent unit price given to a customer for a specific item, from the Billing data.
. Display the Last Price under Additional Data B Screen
add new field (last extended price) in additional data b screen.
after that 1.     Using the Sales Order Material Number (VBAP-MATNR), Sales Order Sales Organization (VBAK-VKORG), Sales Order Distribution Channel (VBAK-VTWEG), Sales Order Division (VBAK-SPART), Sales Order Sold-to Number (VBPA-KUNNR for VBPA-PARVW=u2019AGu2019) to access the Billing Items By Material Index Table (VRPMA) and specify a billing date (VRPMA-FKDAT) of less than 60 days from current Sales Order requested delivery date (if specified at header VBAK-VDATU or at the schedule line level (VBEP-EDATU). This will result in all the billing documents where the Sold-to bought the item but isnu2019t completely refined as of yet. Retain the billing document (VRPMA-VBELN), item (VBPMA-POSNR), and billing date (VRPMA-FKDAT) in a temporary table to pass to number 2 as the input.
2.     Use the billing document (VRPMA-VBELN) and item (VRPMA-POSNR) to read the Sales Document Partners Table (VBPA) where the partner function (VBPA-PARVW = u201CSHu201D) and the Sales Order Ship-To (VBPA-KUNNR for VBPA-PARVW=u2019WEu2019) to select ONLY billing documents that are for that given ship-to location. This filters out only billing documents relevant for that ship-to location.
3.     From the resulting list of billing documents, select the most recent date (VRPMA-FKDAT) which will refine the search for the last Billing Document (VRPMA-VBELN) and item (VRPMA-POSNR).
4.     Using the most recent Billing Document (VBPA-VBELN), access the Billing Document Item Table (VBRP). To result in the Last Extended Price as VBRP-KZWI1.
5.     This price will be an extended price which needs to be calculated as a u2018unit priceu2019. For this billing item, select the sales unit (VBRP-VRKME) to determine if the sales unit is in cases or eaches.
a.     If the unit of measure is in cases, then simple math is required to divide the Last Extended Price (VBRP-KZWI1) by the billing quantity (VBRP-FKIMG). Standard rounding should apply when .005 results in a .01.
how to achive this ?

Hi Chakravarthy,
use the Exits provided in SAPMV45A -includes MV45*ZZ and screen exits as well 8309 8310 8459, 8460. Just be sure to
use zznnnnnn include in the SAP provided forms instead of coding directly in the forms.
You can check below user exits:
MV45ATZZ :For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ:
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ:
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1:
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
Reddy

User exit for contract start date in sales order change mode.

24.10.2008
Hi Gurus,
I need to disable the 'contract start date' (VEDA-VBEGDAT) field in Contract data tab at header and item level. Can someone suggest a user exit for the same ???
Regards,
Udaynath

Dear Udyanath,
Please check these User exits with the help of ABAPer
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document
processing are listed below.
USEREXIT_FIELD_MODIFICATION
     This user exit can be used to modify the attributes of the screen
     fields.
     To do this, the screen fields are allocated to so-called
     modification groups 1 - 4 and can be edited together during a
     modification in ABAP. If a field has no field name, it cannot be
     allocated to a group.
     The usage of the field groups (modification group 1-4) is as
     follows:
-   Modification group 1:   Automatic modification with transaction
         MFAW
-   Modification group 2:   It contains 'LOO' for step loop fields
-   Modification group 3:   For modifications which depend on check tables or on other fixed information.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document
header level. It is described in the section "Transfer of the
customer master fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document
item level. It is described in the section "Copy customer master
fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of
the sales document schedule lines.
The user exit is called up at the end of the FORM routine
VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer
master fields into sales document".
The user exit is called up at the end of the FORM routine
VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

Need a user exit for Export Control check in Sales Order fro VA01/VA02

Hi ,
     I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ultimate destination country User Exit needs to be built in with following logic
1.     Check to see if ultimate destination country field is maintained in Sales Order
2.     If a value is maintained then for the Export control checks use ultimate destination country instead of the Ship-To country (step 1)
3.     If no value is maintained then use Ship-To country as default
The user exit is called when the user creates or changes a Sales Order.
Can anybody help ?
Thanks

Hi,
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
<b>Reward points</b>
Regarsd

What are the user-exits which will trigger on saving Sales Order

Hello Experts!!!
I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002 Predefine sold-to party in sales document ). So it is working fine.
Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
Thanks a lot on advance.

Hi
U can't find it there,because it's a include, not enanchement.
So u need to use the trx SE38, not CMOD.
For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
U need to get the access key by OSS in order to change them.
These are the rest of the includes where u can find other exits:
       INCLUDE MV45ATZZ.            " Data definitions in MV45ATOP
         INCLUDE MV45AOZZ.             " User-modules PBO
         INCLUDE MV45AIZZ.             " User-modules PAI
         INCLUDE MV45AFZA.             " User-forms < 3.0
         INCLUDE MV45AFZB.             " User-forms
         INCLUDE MV45AFZC.             " User-forms < 3.0D
         INCLUDE MV45AFZD.             " User-forms   3.0E
         INCLUDE MV45AFZF.             " User-forms   3.0F
       include mv45afzg.             " User-forms   3.1G
         INCLUDE MV45AFZH.             " User-forms   4.6B
         INCLUDE MV45AFZZ.             " User-forms
         INCLUDE MV45AFZ4.             " User-forms   4.0
Anyway u can find some information about these exit in customizing (trx SPRO):
Sales and Distributions->System modifications->User exits
Max

User Exit or BADI on saving of Sales order cost estimate (CK51N)

Hi,
Can any one share with me what are the User Exit or BADI that gets triggered on saving of Sales order cost estimate (CK51N).
Regards,
Bijay

Hi
Check the link
Need Enhancement Spot or BADI for transaction ck51n
Regards
Sanil

User Exit for Requested Delivery Date in Sales Order

Hi
Which user exit can be used to change Requested Delivery Date in Sales Order.
Scenario: Sales Document Type: OR has Lead Time: 7 days. System always proposes delivery date after 7 days. We need to change this Lead Time based on plant.
Thanks in advance for your support.
Regards
Uma

Hello,
try with USEREXIT_MOVE_FIELD_TO_VBEP or USEREXIT_SAVE_DOCUMENT_PREPARE, of program MV45AFZZ.
Hope to be useful.
Best regards,
Andrea

Find the user exit while creation and change of sales order

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022     The logic for the user exit to explode should consider the following assumptions and validations
o     Customer master to have the entry at KNVV-KVGR1
o     Material master to have the entry at MVKE
o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A     Quantity / Scale     UoM     Price(£)
     0-10     PAL/TES     20
     11- 20     PAL/TES     10
     21- 30     PAL/TES     5
     31-40     PAL/TES     2.5
     >41     PAL/TES
Product B with Scales mentioned below
Product B     Quantity / Scale     UoM     Price(£)
     0-15     PAL/TES     25
     16-20     PAL/TES     20
     21- 30     PAL/TES     15
     31-40     PAL/TES     10
     > 41     PAL/TES     5
u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022     The expected results should be
o     Product A qty 10 + B qty 15 added = 25Pal
o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

User exits/BAdIs for Forecast consumption by sales order

Hello Experts,
My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
My requirement is:
For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
I appreciate if anybody explain me the process?
Thanks in advance!
Raj

Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
There is no standard way of making the sales order visible in another location.
Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
Can you be more specific.
THanks
Kumar

User Exit in the change mode of Sales Order

Dear Guru's
In my requirement I want to stop the user from editing the status of Delivery block and Billing Block into the change view of Sales Order.
I have 2 users for them whenever they may see the change mode of sales order they should see Delivery and Billing Block in gray
that they should not be able to remove the block or change the block.
But I have two other users also who can release and change the Blocks.
Therefore I think mine is the User Exit case but I dont know which is the User Exit I have to give to the ABAPer
Please suggest me the User Exit, Thanks in advance for answer and Suggestions.
regards,
Vojas

Dear Vojas,
As per me User exit will be used, as there are check about the users in your requirement. Please try with in MV45AFZZ, there are seceral user exit, I guess in USEREXIT_READ_DOCUMENT may be used, ask your abaper to put a check on the current user and if the user which is not in your list of authorized one then change the Blocks in Display mode, or uneditable mode.
Thanks,
Raja

User-exit to copy collective number from sales order to purchase order

Hi,
Can any one help me which user-exit/BADI is used to copy collective number from sales order to purchase order? please help me.
Thanks,
Alka

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

User exit to update characteristic attributes in sales order

Similar Messages

Maybe you are looking for