User Exit to update user status at VA01/VA02

Hi Expert
Please help identify any User Exit to update User Status stored in tables (JSTO/JEST), at time of sales order (Business Object 2032) creation / change.
Requirement is to set check mark on a specific user status in case of a material master is missing HTS code.
Regards-Aamir

Hi,
If your requirement is to set the check the HTS field in the material master, you can make the field as Mandatory without which the Material cant be saved
You can make this field mandatory in OMS9 transaction code with field status as 89 and the field is MARC-STAWN
Please revert if you need more details
regards,
santosh

Similar Messages

User Exit/BADI after database commit in VA01/VA02

Hi All,
Can you tell me an user exit/BADI in VA01/VA02 which I can utilize AFTER the database commit but still utilize the tables/structures like xvbap, xvbkd etc? Thanks.
Best Regards,
Avimanyu

Hi Sengupta,
Usually there are no user-exits after COMMIT.
What you need to do is register a call which will be executed after COMMIT, from one of the available user-exits.
To do this, SAP provides 2 methods:
1. PERFORM xxx ON COMMIT
2. Function Module with attribute "Update Module"
Check ABAP keyword help for more information for PERFORM xxx ON COMMIT.
<a href="http://help.sap.com/saphelp_46c/helpdata/en/34/8e72cc6df74873e10000009b38f9b8/frameset.htm">http://help.sap.com/saphelp_46c/helpdata/en/34/8e72cc6df74873e10000009b38f9b8/frameset.htm</a>
Hope this helps.
Regards,
Sumant.
PS: Reward points if this is helpful.

User exit to update extended segment in idoc for va01

Hi Experts,
I am working on Outbound IDOC interface for VA02 and VA01
I am using ORDERS05 IDOC type
i want to create one custom segment
and i want to fill that custom segment
but i am not able to find user exit to update this custom segment
please help.

Akshay,
I think you want to send order response for the orders created via Va01 or edited by Va02
To do this steps are:-
1) Use FM IDOC_OUTPUT_ORDRSP to send order response (ORDERS05)
2) Find the function exits in this Fm using search string as " Call Customer-function".
3) Use include in the exits to write code to append new segments to the IDOC. Look for the Tables parameter in the Exits which are of structure type EDIDD. Insert new Segment details in this table and your IDOC will be generated with required values.
Hope this helps!!
Harry

User Exits on Updating and Integrating

I was reading an old Forte v3.0 presentation on whats new in Forte v3.0.
One of the proposed features was a set of primitives for defining user exits
on updates and integrations.
I haven't seen any facility for this in Forte v3.0g though. Has this in fact been
done ? Does anyone have any information on this.
Thanks,
-Carl
Carl Schei
Technical Forte Consultant
South Africa
+27 31 3641765 (w)
email : [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

You can use the BADI:MB_MIGO_BADI. In this badi you could check the header by using the method status and header.
Hope this solves your problem.
Regards,
Narayani

User exit to update characteristic attributes in sales order

Hi all,
I am having one queer requirement.
We are having variant configuration. We are manufactiuring a material which is having lenght as one of the characteristic.
While creating the sales order the user will enter the value against length. This we have to pull in the inspection lot with range.
For ex. if the length required by customer is 1000 mm then depending upon the tolerance limit say +/-1.5 %, another characteristic should get updated with the allowed range (here in this example the lower range 985 and upper range 1015) against another characteristic.
This characteristis will sever as class characteristic for QM master inspection characteristic.
Here the problem is the functionality can't be mapped with object dependency in satandard SAP (you can't derive range with object dependency), so I am looking for user exit to update the second characteristic depending upon the value of first characteristic and allowed percentage.
The user exit should be effective for sales order creation as well as sales order change.
Please help.

Hello Nikhil,
I am looking for the tolerance limit to upadte against one char only and not two separate chars.
If the range is against only one char (and that too again in numeric format and not characteristic format) same shall can be pulled against master inspection characteristic in inspection lot.
Looking forward for the soution.
Mimiri

How to find which are the user exits that updating z table.

There was a question posted by someone else which said:
I have a z table. my requirement is to find the user exits that update the value to this table?
but my requirement is to get only those user exits that update my z table.
Before that question was rejected, it got 5 replies which made me think that this tip is worth sharing.
So the steps are:
Do a where-used list search from SE11
Click on Search Range button at bottom
Type UPDATE (you can also add Insert, Delete etc to select-option) to ABAP Key Words field
Say No to the popup that asks whether to include Fields of the Table
Result will show relevant programs with code snippets doing static Update on that custom table.

EWK1 would be too performance heavy in this case. It scans the source code to get the result.
You can however, download the list of programs given in where-used list, and give that as limiting condition in EWK1 or some other code scanning utility.
Using my method, where-used list of table is taken from database tables, and then code scanning is done only on the that list, not on entire Z* programs.
Try it yourself to notice the speed difference.

User exit to update Vendor Confirmation in ME22N

Hi,
I am adding a subscreen at the header level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST. This new sub screen at the header level will have fields like confirmation category, delivery date..etc., and a push buttom called 'CONFIRM'. When the user selects the line items to be confirmed and clicks the 'CONFIRM' button the data from the customer subscreen should be copied to the item details(in Confirmations tab).
The problem is with the confirmation tab. I need an user exit to update this. When the PO is saved confirmation should be created and EKES table should be updated.
Any useful information will surely be rewarded
Thanks in advance
Antony.

Hi
Following enhancements are available....
Transaction Code - ME22N                    Change Purchase Order
Exit Name           Description
AMPL0001            User subscreen for additional data on AMPL
LMEDR001            Enhancements to print program
LMELA002            Adopt batch no. from shipping notification when posting a GR
LMELA010            Inbound shipping notification: Transfer item data from IDOC
LMEQR001            User exit for source determination
LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001            Customer-Specific Source Determination in Retail
M06B0001            Role determination for purchase requisition release
M06B0002            Changes to comm. structure for purchase requisition release
M06B0003            Number range and document number
M06B0004            Number range and document number
M06B0005            Changes to comm. structure for overall release of requisn.
M06E0004            Changes to communication structure for release purch. doc.
M06E0005            Role determination for release of purchasing documents
ME590001            Grouping of requsitions for PO split in ME59
MEETA001            Define schedule line type (backlog, immed. req., preview)
MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1            Enhancement to Document Overview ME21N/ME51N
MEVME001            WE default quantity calc. and over/ underdelivery tolerance
MM06E001            User exits for EDI inbound and outbound purchasing documents
MM06E003            Number range and document number
MM06E004            Control import data screens in purchase order
MM06E005            Customer fields in purchasing document
MM06E007            Change document for requisitions upon conversion into PO
MM06E008            Monitoring of contr. target value in case of release orders
MM06E009            Relevant texts for "Texts exist" indicator
MM06E010            Field selection for vendor address
MM06E011            Activate PReq Block
MMAL0001            ALE source list distribution: Outbound processing
MMAL0002            ALE source list distribution: Inbound processing
MMAL0003            ALE purcasing info record distribution: Outbound processing
MMAL0004            ALE purchasing info record distribution: Inbound processing
MMDA0001            Default delivery addresses
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
Hope this helps to solve ur problem....
<b>do reward if useful....</b>
regards
dinesh

User exit for updating delivery block of Sales order before Delivery

Hi Folks,
Need to have an user exit for updating Delivery Block indicator for a Sales order Before creating its delivery
I have got an exit in Program SAPMV45A
MV50AFZ1
FORM USEREXIT_REFRESH_DOCUMENT.
that hits before processing the delivery block fro delivery (Correct me if i m wrong with this )
Now i want now how to change the Delivery Block indicator of Sales order in that exit
any FM available ?
Thanks n regards
Sonal...

Hi ,
How did you solved this issue?
I am having similar scenario in which while pressing the save button delivery block should update if multiple schedule line exist.
Tried by two different approaches in various user exit without any success.
AFAIK we have two ways to achieve this functionality.
1) Count the no of rows in vbep. If greater than 1 then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
This is not correct. If there are two line items both with single schedule line . This case total no lines in vbep will 2 and above condition will true which is incorrect.
2) There is a indicator for multiple schedule line (VBAPD-EPMEH , xvbap-epmeh ) if it is check then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
If I write code in USEREXIT_SAVE_DOCUMENT_PREPARE.
Multiple schedule line indicator is not populate so can not use 2nd approach.
If I write code in USEREXIT_SAVE_DOCUMENT it of no use as vbak is updated before reaching this user exit.
If I write code in USEREXIT_MOVE_FIELD_TO_VBAK as this user exit is also called while pressing the enter key for this I have use
the condition of fcode but it also fails in some condition.
If fcode eq 'SICH'.
Read table xvbap with key epmeh = 'X'.
IF SY-SUBRC = 0.
VBAK-LIFSK = '03'.
Else.
VBAK-LIFSK = ' '.
Endif.
Endif.
Please help me to get the desired functionality working for all cases.
1) One line item with multiple schedule line
2) Two line item with multiple schedule line
3) One line item having one schedule line and second one having multiple
4)Two line item both with single schedule line.

Re: User Exits on Updating and Integrating

Carl,
I sent this out to the list some time ago. But in case
you missed it here it is again.
Below is a zip file (UUencoded) containing instructions
on integrating Forte with Microsoft SourceSafe. It may
contain enough information for you to figure out how to
tap the repository callouts that happen on integrations.
-Fred
[email protected]
>
I was reading an old Forte v3.0 presentation on whats new in Forte v3.0.
One of the proposed features was a set of primitives for defining user exits
on updates and integrations.
I haven't seen any facility for this in Forte v3.0g though. Has this in fact been
done ? Does anyone have any information on this.
Thanks,
-Carl
Carl Schei
Technical Forte Consultant
South Africa
+27 31 3641765 (w)
email : [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>------------------------------------------------------------------------
Any views expressed in this message are those of the individual sender,
except where the sender specifically states them to be the views of
Reuters Ltd.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Although not a direct answer to your question, this blog series will help you to understand the difference better :
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework

User exit for update rule of info structure

Hi gurus,
Can anybody tell me how to implement a user exit of update rule for LIS info structure, for ex,S140.
Thanks
Eric xu

There is no user exit and we are not allowed to modify the update rules of the standard SAP info structures. However, you can create your own info structure with the same or similar configuration and then apply a formula or a requirement in the update definitions (MC25 transaction), as you please.
After that you can just turn off the update of S140 (in OMO1 transaction) and use your own info structure instead in MCSI transaction.

VA02 user exit - cannot update append structure field in XVBAP/VBAP

Hi Guys,
I am currently using one of the many user exits in updating XVBAP to update the VBAP sap table in VA02.
However I am encountering a problem when updating a customized append structure field. When I change the value of the append structure field only it doesnt update in VBAP upon save event. Only when I also change a sap standard field (ARKTX) the append structure gets updated.
Is there a way to resolve this wherein even if I just XVBAP-<append structure field> only ... the corresponding field in VBAP gets updated?
THanks guys and hope to hear from you soon.

Hi,
Which userexit subroutine are you using to move the append structure field values to the XVBAP table? Are you having the user enter values on a screen during VA02 for the append structure fields, or are you setting those values within the code when the user saves? For the purposes of this response, I will assume you are not having the user enter the values, and that (from what you have described) you are using subroutine userexit_move_field_to_vbap.
While userexit_move_field_to_vbap sounds logical at first, you should be aware that this subroutine (which is called at the end of module vbap_fuellen) may only be called when one of the chain fields (in the flow logic of the VA02 screen) is changed. If you search for all the calls of module vbap_fuellen in screens of SAPMV45A, you will see that most of them have a list of chain fields with "on chain-request" logic. Since your append structure fields will not be listed in the flow logic of the standard VA02 screen, changing one of the append structure fields alone would not trigger the PAI module vbap_fuellen. Of course, changing a standard VBAP field (ARKTX was your example) could trigger the vbap_fuellen module (as long as it was one of the chain fields) which would consequently trigger the userexit_move_field_to_vbap subroutine.
You may want to consider trying USEREXIT_SAVE_DOCUMENT_PREPARE. Please explain further if I have misunderstood your question.
Anyone else out there have any ideas? Does my analysis make any sense?
Best Regards,
Jamie

User exit for Production Order status

Hi all ,
Pl tell me about the : user exit for Production Order status
( i want CLSD status after settlement of the Production order .)
regards,

Hi,
for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
Also BADI WORKORDER_UPDATE could be interessting for you.
Regards,
Sabine

BADI or User exit to update the data in a PO(ME22N or ME21N)

Hi,
I require a BADI or an user exit to update all the line items of a PO...
Please let me know if there is a badi or user exit that triggers before the saving of the PO..and also updates the values of all the item data fields..
Thanks in advance
Regards
Shiva

Hi,
we have checked above BADI;s but will not suffice the requirement;
The requiement is
While Creating PO(ME21N) and Changing PO(ME22N):
When the user tries to Save the PO:
All the line items should be accessible and can be editable.
If the validation fails, error message should be displayed on
the screen and user should be able to edit at that location.
Please let me know if there is any other way or enhancement point for the same...
Regards
Shiva

User exit to update the incompletion log in sales order for pricing error

Hi experts,
I have to check the some mandotory pricing conditions in sales order, if that conditions are not exist in sales order then i need to show the information message as well as i need to update it in incompletion log of sales order. (incopletion log we can see on menu bar 'EDIT' or ctrl+F8 on main screen of VA01). So that user can save the sales order but it will be in incomplete status.
I have completed it upto showing the information message using user exit 'MV45AFZZ', but after this i don't know how to update it in incompletion log of sales order for pricing. I tried to update in tables VBUK-UVPRS, but i am not getting the desired result.
Please anyone can tell me how to update it. In which user exit i can update the incompletion log.
Thanks and Regards,
Vicky.

Hi Vinod,
I am sending you my code please check it,
   if TKOMK-SPART = 10.
    if XKOMV is not INITIAL.
      clear v_JEXP.
    READ TABLE XKOMV with key kschl = 'JEXP'.
    if sy-subrc = 0.
      check XKOMV-kwert = 0.
      message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
      v_JEXP = 'X'.
    else.
      message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
      v_JEXP = 'X'.
    endif.
    if v_JEXP = 'X'.
XVBUV-MANDT = sy-mandt.
XVBUV-POSNR = '000010'.
XVBUV-TBNAM = 'VBAP'.
XVBUV-FDNAM = 'PRSOK'.
XVBUV-FEHGR = 20.
XVBUV-STATG = '06'.
XVBUV-FCODE = 'PKON'.
XVBUV-SORTF = 9999.
XVBUV-LFDNR = 0000.
XVBUV-UPDKZ = 'I'.
append XVBUV.
    endif.
endif.
endif.
Please suggest something to solve this.
Thanks and Regards,
Vicky.

User Exit for Updating Delivery Plant at Item Level in Sales Order

Hello Experts
There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant. There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
Thanks a lot....
-Harkamal

Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
Are you kidding??? You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!! Never, ever change a critical value like plant in the SAVE user exits...

User Exit to update user status at VA01/VA02

Similar Messages

Maybe you are looking for