User exit transaction AS01
Hi,
i need a user exit in transaction AS01 to obtain the asset information save immediately the user push the button save, and send it to an external system using a function module (RFC). I used a program to find a list of user exits associated to transaction AS01, but only one of them only allow to obtain the asset before the system saves it (Enhancement AISA0001), and some of them don't stop using a break-point or pop-up to probe it.
anyone know a user exit that allow to obtain information of assets after save it?
is possible activated the user exit that don't stop with a break point?
thanks
Alejandro,
Function module EXIT_SAPLAISA_001 of the Enhancement AISA0001 does get called on SAVE (at least in 4.7!). It is called whenever an Asset is saved during Create (there are several transactions that can create an Asset - not just AS01) as well as Change. Breakpoints in this FM do work. Keep in mind that the asset is actually saved in an update process.
HTH,
Ramki.
Similar Messages
-
User Exit Transaction AS01 and AS02
Hi Everybody,
I found the user exit EXIT_SAPLAISA_001 for transaction AS01 and AS02. When i save data in transaction AS02, i can validate it before save, using error messages. But when the data is validated in transaction AS01 the user exit only show the error messages the first time that the user push the button save and not the next times. ¿How can i validate all the times that the user push the save button in transaction AS01?
ThanksIn the user exit documentation, it doesn't say anything about this exit being used for validation, therefore, it probably shouldn't be used as a validation routine, especially if its not being trigger at every PAI.
<i>FU EXIT_SAPLAISA_001
Short text
Assign Inventory Number
Functionality
Using this user exit, it is possible to assign an inventory number when you create a new asset master record.
Notes
In the user exit, it is absolutely forbidden to use a statement that leads to an update or removal of database changes. Examples of such statements are:
'Commit Work' , 'Rollback Work' or call of function module 'DB_COMMIT'.
Parameter
I_ANLA
E_INVNR
Exceptions
Function group
XAIS</i>
Regards,
Rich Heilman -
User Exit transaction VI01 and VI02 for checkup.
Hi all, I need one user Exit transaction VI01 and VI02 for checkup.
How to realize a checkup on having modified expenses of transport VIO1 and VI02?
I need name user exit please for checkup on having modified expenses .Hi Rubén,
Check the follows BADIS, they could be helpful:
BADI_SCD_ACCTG
BADI_SCD_CREATE
BADI_SCD_CREATE_CHCK
BADI_SCD_PROCESS_CHK
BADI_SCD_SAVE
BADI_SCD_TRANSFER
regards,
Alejandro. -
User exit for AS01 transaction
Hi,
I need your help, please.
I am doing a validation of the fields ORD44 vs. STORT in AS01 & AS02 transaction, but I can't find the correct user exit. Somebody could suggest to me which user exit i can use to do this? please.
Thanks in advance.
Regards.
MarisolFollowing are the user exits available for AS01 transaction:
Enhancements
AAPM0001 Integration of asset accounting and plant maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Business Add-in:
AAPM BAdI for PM-AA Integration -
Hi Gurus,
I need your assistance for the below requirement.
In AS01 ( Create Asset ), while creating ASSET the Equipment should be created. This syncronization is already done in the customization.
1.The requirement is the Equipment Field in the ALLOCATION Tab should automatically get the Asset Number Value once we click the ALLOCATION Tab.
2.And also the Equipment should be created only if the Evaluation Group 2 is 'Y'.
i checked all the Exits and BADI's available. But my requirement is not met. please help me in this.Hi,
Transaction Code - AS01 Create Asset Master Record
Exit Name
AAPM0001 Integration of asset accounting and site maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Reward points if useful....
Regards
AK -
User exit for AS01 - table ANLZ
Hi,
i need an user exit for transaction AS01.I want to change field ANLZ-CAUFN when user press the save button.I found enhancement AISA0001, but it doesn't contain the table anlz, only anla.Can u help me pls?
regards ,
BurakHI
THESE ARE THE USER EXITS AVAILABLE FOR TCODE AS01
Exit Name Description
AIST0001--- Exchange number range in master data maintenance
AIST0002--- Customer fields in asset master
AMSP0002--- Determine relationship type for two company codes
AAPM0001--- Integration of asset accounting and plant maintenance
AFAR0003--- External changeover method
AFAR0004--- Determination of proportional values for retirement
AINT0004--- Change amount posted for certain areas
AINT0005--- Dummy for extended syntax check. Do not use.
TRAN0001--- User exit for asset transfer
IF THIS IS USEFUL PLEASR REWARD POINTS
REGARDS
ANOOP
Message was edited by: ANOOP R.S -
User Exit transaction FB05 with data of documents that are to be cleared.
Hi,
Is there any user exit or badi in transaction FB05, where the data of documents that are to be cleared and the data of payment document are available?
I need that in the F110 transaction, the field SGTXT of the payment document is filled with the field XBLNR of documents to compensate.
Thanks in advance.
Regards,
Ana LucasHi,
The field XBLNR of the clearing document isn't the same of cleared document.
In the substitution we don't have available the data of cleared document, but only the data of clearing document.
Regards
Ana Lucas -
Hi Gurus,
Is there any user-exit for transaction CG12?
Thanks in Advance,
Regards,
Daniel SiñaniHi,
What we need is to have some validation when saving some data on the "phrase code" field.
Is for an in-house development.
Thanks a lot,
Daniel Siñani -
HI,
I am loocking for a BADI/UserExit that I can use in transaction TRIP to set automatically the field 'cash' (PTK08-KASSA) in the Advance.
Thanks for any help.
Eric.Hi,
Check below User exits:
FITR0001 User exit: Delete/Reorganize trip statistics
FITR0002 User exit: Create/Change trip statistics
FITR0003 User exit: Save trip (PR01, PR04, PR05)
FITR0005 User Exit: Save Trip (PR01, PR04, PR05)
RPRCST01 Customer Exit for Travel Expenses
For your requirement FITR0003 will be helpful.
Thanks and Regards -
User exit , transaction F110, an outbound Idoc
Hi,
During the payment process in transaction F110, an IDOC is generated. I need to identify the user exit within the IDOC build process to do some special processing.
The special process is to substitute the POSTING DATE on the IDOC with the NEXT PAYMENT DATE from the proposal.
Regards,
Jyoti ShankarHi Joyti,
I have requirement to trigger outbound IDOC after generating payment document....as your reply i think you already did this requirenment.
Kindly help how to configure outbound IDOC for this............
Plse reply me soon....
Thanks. -
Hi Guys.
Someone know if there is a user-exit that I can use to control de batch determination in process order (Transaction COR1)
Thanks in AdvanceHi,
Please try these user exits
PPCO0021 Release Control for Automatic Batch Determination
PPCO0013 Change priorities of selection crit. for batch determination
Thanks
sreeni -
Dear Sirs:
I would like to know if exists user-exit for transaction FK01 - Display Vendor / Payment transactions.
I need to valid the count number.
Thank's for your attention.
Eliane RangelThere are also several BAdI's available for Vendor Master maintenance.
use txn SE18, select the drop-down, choose INFORMATION SYSTEMS, leave the definition name blank and enter "*endor" for the short description (it is case sensitive; this will give you Vendor and vendor).
I have used VENDOR_ADD_DATA several times with success. -
User Exit transaction ME21N and ME22N in the save moment
Hi, all. I need one user exit to transaction ME21N and ME22N for SAVE.
I need name user exit please in the save moment.
Message was edited by:
Martínez Vásquez Rubén Dario
Message was edited by:
Martínez Vásquez Rubén DarioHi,
Please check this user exits.
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer's Own Data in Purchasing Document
EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_017 are the best place to change line item. I used in both places again it depends on your requirement for PBO or PAI.
By the way, what do you mean by actualization?
Regards,
Ferry Lianto
Please reward points if helpful. -
guy's
We are currently working on creating some custom
defined screen for tcode:as01 and as91 tcode,we
know user-exit and step's to be followed,but don't understand much of that,how i can create custom
defined screen for as01 ,if anybody worked on these
before,then please let us knowGuys
please go to tcode smod and enter enhancement name as
AIST0002 ,click on documentation radio button and diplay,
can anybody help me in following all these step,step 1
and step2 has been done,step3 need to be followed,
but creating screen is not the issue,how these screen
get called is the issue -
Difference between bex user exit and macros in functionality?
Hi all,
I need to create a report on material master data. I created an infoset on 0material and 0mat_plant. In the requirem
ent, I have a report containing different material numbers followed by attributes in each row. the final column in each
row should be calculated using logic. the logic involves comparing different row values and arrive at final conclusion.
the logic comprises of large number of if conditions. so should i use bex user exit or excel macros?
what is the difference between user exit and macros in funcitonalilty?
is there an issue transporting the macro to Prod for end users to use?
any performance criteria?
Any how to documents ..will be of a lot of help
plz send them to [email protected]
Message was edited by:
ravi aHi,
Macros offer a powerful and flexible way to extend the features of MS Excel. You can either create a macro using VB code or Record a macro. Use Alt+F11 for creating macro using VB code.
You can refer to Microsoft help site or this link for more details:
http://www.taltech.com/support/sw_tricks/exmacros.htm
User-exits are empty subroutines that SAP Developers have provided for you.You can fill them with your own source code.Technically this is a modification.Customer exits are nothing but a include in customer name space will be provided in the function module which starts with CALL CUSTOMER.You can fill them with your own source code.Technically this is an enhancement.
look into following links for procedure to find and use user-exits transaction for finding user-exits is 'SMOD'
http://www.sapbrain.com/TUTORIALS/TECHNICAL/user_exits_tutorial.html
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Maybe you are looking for
-
How can I undo a software update?
How can I undo a software update?
-
Updated to iTunes - won't connect to Store - tried everything!
I've been through all KB items, tested everything suggested. Here is text of diagnostics: Windows Firewall is on. iTunes is enabled in Windows Firewall. Connection attempt to Apple web site was successful. Connection attempt to browsing iTunes Store
-
I have an array that needs to be initialized 1096 times, I don't want to use a cfloop because I am looking for a better performance. So I use a query that brings all the records that have been initialized, the problem is if some of them hasn't been i
-
Error "print driver host for 32bit applications has stopped working"
Got this error when trying to "print" a gmail message to a pdf file. After some research (trial and error) I found that in my case this message is due to the subject line of the message generating an invalid Windows file name. Using the subject line
-
Hey guys, I'm new to labview and I'm working on a project for work. I have my program set up but I would like to add a control that would let me put in a specific cycle value on the front panel, that would allow me to capture data of only the specife