User Exit Triggered during Campus Management Student admission data created

Hi Exports,
This is jnana ranjan working as a campus management implementation project.
Here we are impl student admission process workflow and i want trigger my event through user exit. I am new in user exit please guide me how to find user exit for CM and how to implement this. If you have abap code for similar requirment then please send me through my mailid: [email protected]
Please help me this is urgent requirment for my University client.
Advance thanks you.
Regards,
Jnana

Hi,
Can any one please let me know the user exit triggered during campus management student admission data creation and .
Thanks ,
Jnana

Similar Messages

User Exit/BADI to change the Purchase Requisition date,creating threw MD02

Hi,
I've a requirement to change the Purchase Requisition creation date.
I'm using MD02 to create Purchase Requisition.
Based on the requirement if the available qty is less than the required quantity,we can change Purchase requisition date.
Please let me know if any BADI's/User Exits we can use for this purpose.
I've checked EXIT_SAPLMEREQ_010. I've kept debugging point nad i run MD02, but it is not stopping in the exit.
we are using SAP 4.6c.
Thanks,
Adi.

Hi Experts,
Could you please give me a suggestion for the above problem???
Thanks,
Adi.

What is the user exit triggering at this time of saving delivery document

Hi All,
What is the user exit triggering at this time of saving delivery document
regards
Deekshitha.

For the Delivery process following project are used, you can list out all exit
V02V0001
V02V0002
V02V0003
V02V0004
V50PSTAT
V50Q0001
V50R0001
V50R0002
V50R0004
V50S0001
V53C0001
V53C0002
V53W0001
VMDE0001
VMDE0002
VMDE0003
VMDE0004

User Exit/ BADI during creation of vendor master

Dear Friends,
During creation of vendormaster if the with holding tax is maintained then PAN no. field should be made mandatory.
So far I know this can't done through standard field selection of vendor master. So this is to be done through BADI/User exit. Please provide me the same where in run time I can get PAN no field. It comes from the excise table.
Regards

First try for any Customization is available.
If not we can achieve with enhancement point.
Try to find out an implicit enhancement point on PAI event of the screen there validate for the "PAN No"
if the "PAN No" is blank raise an error message & EXIT from the PAI.
It would serve your purpose.
Regards.
Abhijit

BADI/User Exit for During the automatic/manual clearing f.13/f-03

Hello Experts,
I am looking for a user exit or BADI to accomodate the additional functionality during the automatice and manual clearing process.
During the clearing, standard SAP process post differences to one GL account. This process needs to be modified, in new process a program within the user exit or badi will retrive the clearing account info from a custom table (based on certain criterial). . If there is no record found in the custom table, then standard SAP process should post as normal, posting to the GL account which is controlled within the IMG.
Any input from your side will be appreciated, and if you need further information to understand the scenario, I will be more than happy to provide you.
Thanks,

Hi,
Did you get a solution for this problem from any other means? Cause I am also facing the same problem. It will be great if you can help me in this regard.
Thanks
Sudheer K

User-exit/BADI during outbound ABAP proxy call

Hello,
I want to introduce certain check during outbound ABAP proxy calls to PI. This is a generic check, failure of which would stop the proxy call to proceed and raise an exception.
I would like to place this at the generic place which is called for all the outbound ABAP proxy calls, rather than coding this in each and every outbound proxy class as the check is generic.
Is there some user-exit/BADI where i can introduce this? Maybe within class CL_PROXY_OUTBOUND or somewhere else where i can introduce this check.
Any help in this regard would be appreciated.
Best Regards,
Gajendra.

Dear Gajendra ,
i agree with sabrish, you must be having a z report on the application system that must be calling that outbound proxy...may be if the check is generic it may not be related to a proxy so you can code a FM and then call it before you call that proxy in the z report
Giving points is another way to say thanks

User exit triggered after clicking on PGI button in vl02n

What is the user exit which gets triggered after clicking PGI booton in vl02n.
i used 'MV50AFZ1' which interrupts the process of creating material document.
so pls tell me any User exit which can be used before the process of creating material doc gets started

Hey,
Have you tried with this?
MV45AFZZ
MV45AIZZ
MV45AOZZ
MV45ATZZ
or...
VMDE0004
VMDE0003
VMDE0002
VMDE0001
V53W0001
V53C0002
V53C0001
V50S0001
V50R0004
V50R0002
V50R0001
V50Q0001
V50PSTAT
V02V0004
V02V0003
V02V0002
V02V0001
Not sure if possible...buy maybe
Bye,

User exit required during saveing of vf01 transaction

Hi,
I have the list of 17 enhancements available for the transaction VF01 but i want the exit/badi which will trigger at the time of saving of the billing document. Kindly provide me the exact exit/badi name which will trigger at the time of saving. Thanks a lot in advance for your help.
With Regards,
Ajit Prasad.

Check this:
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
REgards,
Vasanth

User exit for during SO creation

Hi guys,
I'm looking for the user exit during the very initial step when SO is to be created. That is, after the user maintain the "order type" and some organizational data, and right after they click the 'create' button.
Can somebody help pls?

Hu Teck,
Please go throuh these User Exits it may help you
USEREXIT_FIELD_MODIFICATION
USEREXIT_MOVE_FIELD_TO_VBAK
USEREXIT_PRICING_PREPARE_TKOMK
USEREXIT_PRICING_PREPARE_TKOMP
Cheers,
Murali

User exit triggering after material save

Hi all,
        I am lookin for user exit/badi which will get triggered once user creates material master(mm01).i tried with mga00001 & mb_document_badi.None of them works.mga00001 triggers before material is saved in d.b.Please help me.
Regards
Anoop

Hi Anup,
Try with these badis:
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_MATERIAL_OD
BADI_MATERIAL_REF    Addition of customer-defined default data for material
BADI_MATMAS_ALE_CR   Change Data in MATMAS IDoc When Generating an IDoc
BADI_MATMAS_ALE_IN   Change Data in MATMAS IDoc Before Posting
BADI_MATN1           BAdI for Conversion Exit MATN1
BADI_MATRIX_SORT     Sorting of Matrix Axis Population
Thank you,
Thanks,
AMS

User exit in Equipment Address management

Hi,
I am looking for a user exit in 4.6C within Equipment maintenance but none of the enhancements that I have looked at seem to have the address information available. I have looked at Enhancements IEQM0001 to 3 and ITOB0001 - 6.
We have a requirement in a 4.6c environment to check that Equipment address information is only changed on a specific type of related types of equipment as it is a business requirement that all of these items should always have the same address. For example Equipment A, B and C are linked and must have the same address. Equipment A has the master address and when it's address is updated this must also be updated in Equipment B and C. In addition if someone tries to update the Address in Equipment B or C then an error message should be output telling the user that they must update this from Equipment A.
I have not been able to find any enhancements that give you access to the address information however.
Thanks for your help
Ian

Ian,
First of all have a look [here|http://pjatkin.users.btopenworld.com/documents/PMCSUserExits.pdf] for the PM/CS enhancement options.
You could probably IEQM0003 (Additional checks before equipment update) to check if the address has been changed by either using a suitable function module to look at the buffer data, or using field-symbols to call-in the data from the memory.
PeteA
[www.pjas.com]

User Exit EXIT_SAPLV01Z_004 in Batch Management

Hi All
I am trying to use EXIT_SAPLV01Z_004 in checking of externally created Batch number.The exit is working fine for ROH materials in MIGO.It is not getting triggred at all in MB31 or MSC1N.Can any one guide me.
S Anil

Here are user exits for tcode PR04:
Exit Name           Description
FITR0001            User exit: Delete/Reorganize trip statistics
FITR0002            User exit: Create/Change trip statistics
FITR0003            User exit: Save trip (PR01, PR04, PR05)
FITR0005            User Exit: Save Trip (PR01, PR04, PR05)
RPRCST01         Customer Exit for Travel Expenses

User Exit for the Funds Management Update

Hi Experts ,
My requirment is to make the movement type 261 as stastical . This should be reflected in COO11 T Code, Please suggest me the User Exit Or The BADI.
Thanks in Advance,
Regards,
Manish

Self Solved.

USER EXIT REQUIRED DURING DELIVERY OF SALES ORDER VL01N

hi
i want to block all the delivers ( by default ) i.e after creating sales order when user go for delivery ( or runs transaction VL01N ) it should block all the deliveries
plz suggest user exit as i dont find any
thanks
taran

Hi taran,
Check, it may help you.
Exits for VL01N ::::::
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
LE_SHP_GOODSMOVEMENT BADI.
Regards,
Ramesh.

User-Exit for KO04(order manager)

Hi Gurus!
I have created a user-exit to check validation for internal orders that checks to see that the material number and serial number exist for a particular internal order type and it works fine . I had to include another order type for the same and I did it works fine, when I go through the transation KO02. Now they want this validation to take place through tarnsaction KO04 too . I looked into the exits , but unable to decide which one to use. Can anyone please advice which user-exit to use for the validation of internaal orders through transaction KO04.
EXIT_SAPLKAUF_001 -
   include zxaufu03. or
EXIT_SAPLKOAU_002 -
include zxaufu08 or
EXIT_SAPLRKIO_001 -
include zxaufu01. or
EXIT_SAPLRKIO_002 -
   include zxaufu02.
or is it that I have to use simply soem other exit . Please advice . Kind help will be greatly apprecaited.
Thanks

I checked by debugging that in both the transaction ko02 and ko04 both of them goes through the exit that I have used. i.e
EXIT_SAPLRKIO_001---include zxaufu01. SO its going through that but its not checking the exit in case of KO04 I believe. Please help me out to locate the problem , I have my block of code that I ahve used in it please advice.
data: l_matnr type matnr,
      l_sernr type gernr.
check syst-dynnr = '0600'.
check i_actvt = '02'        "change
    or i_actvt = '32'.      "save
if ( i_aufk-auart = 'CENT' ) or ( i_aufk-auart = 'EXCV' ).
if i_aufk-aufex is initial.
    syst-msgid = 'Z001'.
    syst-msgno = '999'.
    syst-msgty = 'E'.
    syst-msgv1 = 'Enter the External order Number'.
    raise e_message.
endif.
l_matnr = i_aufk-aufex(5).
l_sernr = i_aufk-aufex+6(14).
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
    input         = l_matnr
importing
   output         = l_matnr.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
    input         = l_sernr
importing
   output         = l_sernr.
select count(*) from equi where
    matnr = l_matnr and
    sernr = l_sernr.
if sy-dbcnt = 0.
    syst-msgid = 'Z001'.
    syst-msgno = '999'.
    syst-msgv1 = 'External order Number is Invalid'.
    syst-msgty = 'E'.
    raise e_message.
endif.
endif.
Thanks

User Exit Triggered during Campus Management Student admission data created

Similar Messages

Maybe you are looking for