User exit upon saving the customer

Hi
can any one tell me what user exit is triggered upon saving the customer in XD01,XD02,VD01 & VD02 Tcodes.
Thanks
Sonali

Hi sonali
Check these user exits which are used at partner determination level. May be this inputs will help you
EXIT_SAPLV09A_001
You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address should be created (duplicated).
EXIT_SAPLV09A_002
Call up this user exit if a customer has not been maintained in the current sales area.
EXIT_SAPLV09A_003
Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
EXIT_SAPLV09A_004
Use this user exit to integrate your own check in a program that runs before the partner is saved in the document.
For more detailed information, see the program documentation for each of the user exits
Regards
Srinath

Similar Messages

User exit when saving the user profile

Hi All,
Is there any user exit exist which get triggered whenever any SAP user profile is saved.
Thanks in advance,
Harkamal

Hi harkamal,
<b>I dont think that any user exit is present for the code :SU01.</b>
If you want to check the user exit. please find the below code and execute in SE38 you will get the Userexit related to the TCode.
*& Report Z7CC_USEREXIT_TRANSACTION_CODE
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.

User Exit while saving the Excise Invoice in J1IIN

Dear All,
I want know whether anu User Exits are there while saving the Excise Invoice in J1IIN.
The "scenario" here is as follows:
---I will create an invoice(Commercial) in VF01. Suppose I got a number 1234(This is Billing Document number).
---Now I will go to J1IIN and create an Excise Invoice by reffering to the VF01 Billing Doc Number.I will enter all the details. Then I will Save it. While saving I want to check the following aspect:
I want to compare the Billing Document Number and Excise Invoice Number and give error if both the numbers are not same.
---That is I want to see that Excise Invoice and Billng Document number should be same.
I need your suggestion in the above scenario.
I will definitely reward if problem is solved.
Regards,
Raj Kumar Reddy.

Hi Raj,
Here is a list of available userexits for transaction J1IIN :
J_1I7_USEREXIT_DEPOT_BEF_SAVE
J_1I7_USEREXIT_DUTY_IN_EXPORT
J_1I7_USEREXIT_EXCISE_BEF_SAV
J_1I7_USEREXIT_EXGRP_DETERM
J_1I7_USEREXIT_SERGRP_DETERM
hope they are of some use.
Regards,
Philip Johannesen

User exit when saving the financial document (VX11N)

Hi,
We are creating financial document as a letter of credit using transaction code VX11N. User would like to have some checking on the fields based on some user defined logic. Is there any user exit that can be used to serve this purpose. I am looking to usre exit similar to when saving sales order (i.e: USEREXIT_SAVE_DOCUMENT in MV45AFZZ).
Regards

Hi,
Check below link for all SD user Exits.
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
Best regards,
Anupa

Is there any user exit after saving the material doc

Hi,
Is there any user exit in the T-code:mb01/migo after saving the material doc,?I want to record some data when the doc is saved.
thanks,
lance

Hi
Please check <i>The enhancement MB_CF001, includes a function module that is called up immediately before the COMMIT WORK when a goods movement is posted.</i>
Regards
Ramakrishna

Do we have a user exit to write some custom code at the R3 Logoff event

Hi Colleagues,
is it possible to have some custom code at the Log Off event. I mean when the user logs off from the R/3 system, do we have a user exit to write some custom code at that time?
Thanks,
Gaurav

Hi Venkat,
I suppose you are aware of the fact that for custom infotype, you need to create custom segment and custom message type. This process can be found at- **************** - Step-by-step guide to ALE and IDOCs
You need to also know about the change pointer and job scheduling concept for the same. You can refer to this link- Resource Configuration Notes (Sun Identity Manager 8.1 Resources Reference)
I hope studying these links will make you achieve your goal. All the best
Tip- Try out each step that has been mentioned these links
Regards,
Ajinkya

BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.

Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá

User exit for saving a sales order

hi
wats the user exit when saving a sales order?

Hi,
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
tables : modsap
tcode : cmod,smod
Reward if usefull

User exit on saving IW21

Hi all,
I need to find user exit which is launched on saving the notification with the transaction IW21/IW22. I found those items:
IWO10026            User check on setting status 'Do not perform'
IWO10027            User exit: Generate user-defined settlement rule
IWOC0001            Create PM/SM notification: Determine reference object
IWOC0002            PM/SM notification: Check whether status change is allowed
IWOC0003            PM/SM authorization check of ref. object and planner group
IWOC0004            Change single-level list editing PM/QM/SM ALV settings
but any of them seems to be useful for me. Could anyone give me some hint?
Thanks in advance and best regards,
Anna

Anna,
What are you trying to do in the user exit? Here's a list of some of the user exit function modules. You can easily retrieve the project from any of them.
But - the list may not help you. It depends on what you are trying to accoplish.   Notifications has some excellent user exits and there are follow up actions / action boxes that can be used as well.
Michelle
Customer Exits QM/PM Notifications
EXIT_SAPLIQS0_002              User Exit for Influencing the F4 Help for Catalogs
EXIT_SAPLIQS0_003              Function Code "+US3/4" in Menu "Goto/Task" in Notification Processing
EXIT_SAPLIQS0_004              Function Code "+US5/6" in Menu "Goto/Activities" in Notif. Processing
EXIT_SAPLIQS0_005              Determining Processing Deadlines According to Priority
EXIT_SAPLIQS0_006              Default Partner When Adding A Notification
EXIT_SAPLIQS0_007              Determination of BOM application for BOM Explosion
EXIT_SAPLIQS0_008              Supply Function Codes with Text/ Deactivate Codes: "Goto/Task"
EXIT_SAPLIQS0_009              Supply Function Codes/ Deactivate Codes: "Goto/Activity"
EXIT_SAPLIQS0_010              Function Codes in Menu "Goto/Notification" in Notification Processing
EXIT_SAPLIQS0_011              Supply Function Codes with Text/ Deactivate Codes: "Goto/Notification"
EXIT_SAPLIQS0_012              Function Codes in "Goto/Cause" Menu in Notification Processing
EXIT_SAPLIQS0_013              Supply Function Codes with Text/ Deactivate Codes: "Goto/Cause"
EXIT_SAPLIQS0_014              Function Codes in Menu "Goto/Item" in Notification Processing
EXIT_SAPLIQS0_015              Supply Function Codes with Text/Deactivate Codes: "Goto/Item"
EXIT_SAPLIQS0_016              Function Module for Deactivating Notification Function Codes
EXIT_SAPLIQS0_018              Check Whether a Change of Notification Type is Allowed
EXIT_SAPLIQS0_019              Influence Data Transfer for New Notification Type
EXIT_SAPLIQS0_020              User Exit "Check Authorization for Status Change"
Customer Exits Notifications
EXIT_SAPLIQS0_001              Customer Exit "Check Status Change for Permission" for PM/CS Notificat
EXIT_SAPLIQS0_017              Default Values when Adding PM/CS Notification

User exits for saving in IQ02 transaction.

Hi All,
I have the following problem: The end user is unable to save few fields (Stock type, plant, storage location) data in IQ02 transaction.
1. Enter IQ02 transaction, give the material and serial number.
2. In SerData tab, give the stock type, plant and storage location
3. Now when I am trying to save, the following error is prompted: "System status ESTO is active (EQU 30055392)"
4. After this when I press continue button, the data is not saved.
I feel that there could be some problem in the user exits for this transaction. Please tell me the user exits for saving in this transaction.
Thanks,
Vishal.

Hi Vishal,
Please find list of userexit for Tcode IQ02 as below,
Exit Name           Description
IEQM0001            Add. checks for equip. installation at functional locations
IEQM0002            Additional checks for definition of equipment hierarchies
IEQM0003            Additional checks before equipment update
IEQM0004            Object is allowed for contract partner (Order->MaintCont.)
IEQM0005            Object allowed for SD contract (MaintContract->MaintCont.)
IEQM0006            Object allowed for SD contract (Maintain maintenance cont.)
IEQM0007            Check/change manufacturer field in equipment master.

COR2 user exit for saving item changes

Hi,
i need to change item contents with user exit while saving in COR2 transaction.I found several user exits with debugging.But could not accomplish to change fields.
Please give me a user-exit name which can change the item contents while saving.
Thanks.

Hi burc,
what about enhancement CONFPI05 Process Ord. Conf.: Cust.-Specific Enhancements when Saving, EXIT_SAPLCORF_405.
Or tell in more detail what is it you want to change.
Regards,
Clemens

User Exit after saving

Dear Gurus
Is there any user exit after saving billing document to save the data into Ztable for the purpose of control in our business process
prasad.J

User Exits For Billing
o USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified
in the billing type table and can be changed in this user exit. This
user exit is only called when the billing documents is created.
o USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program
RV60AFZZ)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMKCV (header fields).
o USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMPCV (item fields).
o USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program
RV60AFZC)
Depending on the number range, table TVFKD is used to set the
billing date (country-specific requirments in Italy).
USEREXIT_NUMBER_RANGE is automatically deactivated when this user
exit is being applied.
o USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created.
It is used to provide the header and the item of the new billing
document with deviating or additional data.

User exit after saving a sales order

Dear SAP-community,
I am looking for an user-exit that runs after the creation of a sales order. I need the created VBELN of the sales order and want start some additional functionality which should be triggered directly afetr saving?
Does anyone know such a exit?
Thanks
Kind regards
Markus

Plz SEARCH in SCN before posting.
User exit after saving sales order
user exit for saving a sales order

User exit for VD01 - Create Customer

I am finding user exit for VD01 - Create Customer.
I need a newly created Customer number - KNA1-KUNNR.
I found user exit EXIT_SAPMF02D_001, but if field Customer left blank on screen in VD01, the parameter I_KNA1-KUNNR is blank. Because program genereates KUNNR further.
Edited by: S S on Dec 23, 2008 7:56 AM

Dear SS,
What I understood is system is generating internal number range for customer in your case.
You want to know the number of customer number.
I think with this exit EXIT_SAPMF02D_001 you don't get customer number.
Try with this BADI CUSTOMER_ADD_DATA
Method MODIFY_ACCOUNT_NUMBER. use break point here.
Then create a customer in VD01 (internal number range). maintain necessary information and save.
system will take you to debugging mode. here you can see internal number of customer.
Regards,
Chandra

User exit to sense the field value change ?

Hi Guru,
Our ABAPer created 4 customized fields in "Addition data A" and the requirement is once the value of these customized fields' are changed, copy (overwrite) the changed value to material description on the "sales" View
Is there any user exit can sense the value change from the customized fields ?
Thanks
Eric
Edited by: Eric Y on Aug 11, 2008 11:45 PM

USEREXIT_CHECK_VBAP in program MV45AFZB is called when the field is changed.
/Torben

User exit upon saving the customer

Similar Messages

Maybe you are looking for