User Exit - VA01 / VA02 Sales Order, using Variant Configuration Fields

Hi,
I'm doing a user exit for creating / changing a sales order (VA01/VA02), and in my program I'm trying to use the characteristic values in variant configuration: Extras -> Configuration.
I know there's a whole bunch of data in SAPMV45A, but I can't seem to find what I need. Structure RV45A is the closest I can find, but the characteristic name / value fields appear empty during the execution of the user exit.
Any help would be greatly appreciated.
Thanks!

R u creating your own user exit or using the ones which are available for VA01/VA02?
If you can use existing ones, to get the more details abt them, please have a look at below link.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Similar Messages

User Exit to get Sales Order Number during creation

Hi,
I am looking for for an User Exit which provides Sales Order Number, during creation of Sales Order using transaction VA01.
Please provide the Structure/Field Name.
I tried USER_EXIT_SAVE_DOCUMENT. But, it seems it doesn't provide.Kindly help.

Hi:
Program : MV45AFZZ
search for USEREXIT_NUMBER_RANGE.
BR,
Manthana

User Exit Problem in Sales Order

Hello All,
This problem is related to Sales Order.I want the system to forcibly consider another line item and calculate its pricing while saving the sales order at the last moment.
For Example in the sales order I am giving 1st Line Item Material A of quantity 10 and Unit of Measurement BT (Bottle).Then when I am pressing the save button I want the User Exit of Material B as 2nd line item to be populated at that very moment which will be forcibly included and pricing will be calculated in that sales order.The user exit should work at this level.
Now considering the above scenario please suggest solutions in SD / ABAP regarding the successful running of User Exit in the Sales Order are required to attain my requirement.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka

Hi priyanka,
though ur requirement is a bit complex i suggest userexits in this kind of scenarios wont help..rather an additonal program needs to be inserted in the standard sales order program..but for ur reference i am sending the list of all the user exits used in price determination. and the requirements fullfilled by them.... .hope it may help u....and cater to ur requirements....
User Exits For Price Determination
u2022     USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ)
This user exit allows you to copy additional fields for pricing in the TKOMK communication structure (header fields), which have not been provided in the standard SAP system. These fields can also be used for pricing in the billing document.
This user exit is described in detail in the "New fields in pricing" section.
u2022     USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
This user exit allows you to copy additional fields for pricing in the TKOMP communication structure (item fields), which have not been provided in the standard SAP system. These fields can also be used for pricing.
This user exit is described in detail in the "New fields in pricing" section.
u2022     USEREXIT_FIELD_MODIFICATION (module pool SAPMV61A, program MV61AFZA)
You can use this user exit to adjust the display of individual lines in the condition screen by changing the display attributes of the screen fields. This does not include the display of subtotals.
This user exit is also used in order processing.
u2022     USEREXIT_FIELD_MODIFIC_KZWI (module pool SAPMV61A, program MV61AFZB)
You can change the display of subtotals in the condition screen by changing the display attributes of the screen fields.
This user exit is also used in order processing.
u2022     USEREXIT_FIELD_MODIFIC_KOPF (module pool SAPMV61A, program MV61AFZB)
You can adjust the display of subtotals in the condition screen to your requirements by changing the display attributes of the screen fields.
This user exit is also used in order processing.
u2022     USEREXIT_FIELD_MODIFIC_LEER (module pool SAPMV61A, program MV61AFZB)
You can adjust the display of blank lines in the condition screen to your requirements by changing the display attributes of the screen fields.
This user exit is also used in order processing.
u2022     USEREXIT_PRICING_CHECK (module pool SAPMV61, program MV61AFZA)
You can install additional checks to the standard checks of condition lines (e.g. maximum/minimum value).
u2022     USEREXIT_PRICING_RULE (module pool SAPLV61A, program RV61AFZA)
In the standard SAP system, it is predefined which condition categories and classes can be copied or recalculated per pricing type. You can change the predefined standard procedure for each pricing type.
u2022     USEREXIT_CHANGE_PRICING_RULE (module pool SAPMV61A, program MV61AFZA)
You can use this user exit to change the pricing type that has been predefined in the copying control table in billing.
u2022     USEREXIT_XKOMV_BEWERTEN_INIT (module pool SAPLV61A, program RV61AFZB)
This field is used in the formulas and therefore initialized before the loop for the pricing procedure starts.
u2022     USEREXIT_XKOMV_BEWERTEN_END (module pool SAPLV61A, program RV61AFZB)
Within a loop for the price components during pricing, specific values can be transferred into the communication structures in pricing to be further processed.
u2022     USEREXIT_XKOMV_ERGAENZEN (module pool SAPLV61A, program RV61AFZB)
In change mode, you can change the dynamic part of the condition record (KONVD) that is always redetermined (i.e. it is not stored in database table KONV).
u2022     USEREXIT_XKOMV_ERGAENZEN_MANU (module pool SAPLV61A, program RV61AFZB)
You can use this user exit to change the ready-for-input fields of the manually entered condition record in add mode in the condition screen.
u2022     USEREXIT_XKOMV_FUELLEN (module pool SAPLV61A, program RV61AFZB)
This user exit is always called up during a redetermination of all or individual price components. You can change the work fields of the condition line. However, this only applies to conditions that have been determined via a condition record.
u2022     USEREXIT_XKOMV_FUELLEN_O_KONP (module pool SAPLV61A, program RV61AFZB)
This user exit is always called up during a redetermination of all or individual price components. You can change the work fields of the condition line. However, this only applies to conditions that have been determined via a condition record. This may include subtotals, manually entered conditions or conditions that have been calculated with a formula.
u2022     USEREXIT_PRICING_COPY (module pool SAPLV61A, program RV61AFZA)
You can change the KONV fields for copied price components.

User exit in create sales order

Hi expart ,
In sales order have 10 user exit . my requirement is n't satisfied in 10 user exit . Plz. tell me any idea my requirement is putting in sales order .

Find the user exits below for Sales order.
Transaction Code - VA01                     Create Sales Order
Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
If user exists doesn't suit ur requirement then go for customer exit. Goto program MV45AFZZ then serch for Customer exists.

User exit to change sales order status once a delivery is created

Hello Experts,
I want to update the Overall status(VBSTT-GBSTA_BEZ) of a sales order to completed once a delivery is created for that order.Please guide me how can i do this and also the user exit or badi where i can write the code for this.
Thanks in advance.
Regards,
Koustubh

Got the complet guidance in new thread.
User Exit to update Sales order text (Terms of delivery) on saving it
Thanks

Sales Order with Variant Configuration

I´m trying to create a Sales Order with Variant Configuration.
First, I tried to create the order with the BAPI SD_SALESDOCUMENT_CREATE but It would not let me update characteristics.
Then I separated into two BAPI's:
SD_SALESDOCUMENT_CREATE to create Sales Order and BAPI_SALESORDER_CHANGE to modify the characteristics.
I run the two SAP BAPI's from SAP and create the Sales Order and make the characteristics correctly, but when I try to invoke from The Middleware the message V1 555 The sales document is not yeat complete is displayed and does not update the characteristics.
Both functions are such as Remote-enabled Module.
The remote user profile is SAP ALL
Reviewing where the message is used, I see that the message is in the include MV45AF0B_BELEG_BEARBEITEN_ENDE
IF DA_LINES> 0 AND
SY-NE SPACE AND BINPT
CTU_AMODUS BI_INFO-NA 'A' AND
CATTAKTIV IS INITIAL.
MESSAGE I555.
ENDIF.
Do you have any idea why since Middleware is not working?.
Best Regards.
Blanca Segovia.

Hi Diwakar
I changed the creation of Sales Order using only SD_SALESDOCUMENT_CREATE and using Commit Work and it is the same, running the function from se37 create the Sales Order and make the characteristics correctly, but when I try to invoke from The Middleware the message V1 555 The sales document is not yeat complete is displayed and does not update the characteristics.
I Open that Sales order in VA02 and check 'Incompletion Log' the screen show 1 Configuration, I Open the tab of the characteristics without changing the characteristics and only save, then the status changes to Complete document.
You give me another idea that could be happening?
Thank you very much.
Blanca Segovia.

BAPI/FM in ECC to create a sales order with variant configurable material

Hi all,
I need to create a function module that creates a sales order in ECC with a variant configurable material.
can some one tell me if there is a in built function module or BAPI that i can make use of to create a sales order with variant configurable material in ECC.
Regards,
Jessica Sam

Thanks MxG,
I dont know how to use this BAPI. .Can you suggest me a sample code.
My reqmnt is, i have
Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
Regards,
Jessica.

VA01/VA02 - Sales Order Line items

Hello SD Expert,
When am creating Sales Order (VA01) I noticed my transaction display only default of 2 line items and i need to scroll down in the event i have more that 2 line item to enter/key in.
And I noticed that other SD user when they execute VA01 -Create Sales Order their initial screen default to almost 14 line items.
I want my screen to have a default multiple line item during my VA01/VA02 screen.
Take note that both of user having the same font size use and our SAP screen are fully maximize.
My question is - Is this user default setting? or configuration? Can someone advise how can i achieve this?
Thanks in advance.
Itsme.

Hello Naren,
Just a follow up question - is there any chance that this can also made per User settings?
I tried your suggestion in our development by changing the order type to UER2. and when i tried to create sales order i have the multiple line item.
The other user who is creating the Sales Order in our production system use the same order type
and in our production the set up is UER1 but still her screen by default has multiple line item.
Thanks again.

User exit for changing Sales order lines.

Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.

Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y

User Exit in the Sales order create BAPI

Hi,
Can some one help me in telling if there exists a user exit for the BAPI '/AFS/BAPI_SALESORDER_CREATE'.
This is urgent. So, pls. throw some light on this.
Thanks in advance.

Hi
User Exits In Sales Document Processing
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.

Regd : Error during saving the sales order for Variant configuration

Hi -
When the item( config material) is saved in the sales order , system scheduled the production order and getting an error as " Posting Rule for Assembly order for item 000010 could not be generated".
Any solutions regarding the error.

Hi,
This is the process of Assembly to order with variant configuration. In material master, you can maintain gen item category 0002 (configurable material) in basic data view, sales 2 view item category grp 0002 and strategy group 82 in MRP 3 view. After creating of material master, BOM & Routing, You can create sales order in VA01 transaction.
In this VA01, When you create sales order, system will check material availability, capacity checking and system will show variants for each items. And also when you will save the sales order, system will create production order no immdiately.
So you can maintain the above settings compulsory.
please let me know any clarification.
Regards,
Mohan

BAPI for Creating Sales Order For Variant Configuration Materials

Dear Gurus,
Before posting this thread, we have referred many SDN threads, OSS notes and other sites for any sort of help..but no success..All threads and other referrals are not much of help as they are kind of incomplete( Perhaps, we are unable to understand them..no offense).
Few checked threads on this subjects are:
http://scn.sap.com/thread/34590
http://scn.sap.com/thread/851070
http://scn.sap.com/community/abap/blog/2014/04/23/update-vc-variant-configuration-data-using-standard-bapi-in-sales-order
http://scn.sap.com/community/abap/blog/2014/07/15/creating-orders-with-variant-configured-items-using-bapisalesordercreatefromdat2
http://scn.sap.com/community/abap/blog/2014/04/23/update-vc-variant-configuration-data-using-standard-bapi-in-sales-order
http://scn.sap.com/thread/120144
OSS: 549563
Well, we're using the BAPI (BAPI_SALESORDER_CREATEFROMDAT2) which creates the sales order successfully but without the characteristic values in line items.
We're passing data to the following parameters - ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_VALUE to create the variant config but not able to see it getting created.
Pls find attached BAPI coding document for your reference.
If you could throw any light on this issue will be of great help for us.
Thank You in Advance!!!
Reg,
Jagan-SD.

Jagan nath
Try below.
you would need miimum of 3 segments to pass variant config data using this bapi
ORDER_CFGS_REF for each configurable item
POSEX = ITEM #
CONFIG_id , root_id - Start with 1 and increment it for each configurable line item
ORDER_CFGS_INST
CONFIG_ID - from above
INST_ID - Start with 1 and increment it for each configurable line item
OBJ_TYPE = "MARA'
CLASS_TYPE = '300'
OBJ_KEY = material #
ORDER_CFGS_VALUE
CONFIG_ID for the item, INST_ID for the item
charc for characteristic value
VALUE for characteristic value
Reference thread
How to Fill Configuration Data in BAPI BAPI_SALESORDER_CREATEFROMDAT2
Hope it will solve your issue.
Thanks
Ritesh

User exit to modify sales order pricing condition

Hi Experts,
I need ot modify Sales Order Header Condition (ZFRH), Condition Value (KWERT) for Transaction VA01 & VA02
I agree there are many user exits which will modify XKOMV-KWERT structure and can populate what ever value we insert.
But the value we insert is inserting into line item condition and the total of all line items is populating in Header .
I need to modify only Header condition without populating Line items
Thanks ,
Basheer .

Hi:
Program : MV45AFZZ
search for USEREXIT_NUMBER_RANGE.
BR,
Manthana

VA01/VA02-Sales Order-Sceen Enhancements

Hi,
I need to Include 2 Additional Tabs in Sales Order Header Data to accommodate Header Data related Z Fields Included in the Append Structure of VBAK. Each tab will have 2 - 3 sub screens. I am not sure, How to go ahead with this Task. I was told that this is possible in SPRO Configuration by adding additional tabs and adding Screens / Sub screens for that tab in SPRO. Can you please provide me with good documents if you have any? Is there any SAP Notes available to address this kind of tasks?
Appreciate Your Help.
Thanks,
Kannan.

Hi
User exits in the screens for VA01/VA02
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
Regards
Anji

User Exit to copy Sales order data to Billing Doc

Hi,
I want a User Exit to copy a particular field value from sales order to Invoice.
The field which I am copying is STCEG(VAT Reg number)..
I am using the exit
USEREXIT_FILL_VBRK_VBRP but I am not able to acheive my solution.
Is there any other way other than copy croutines with USER EXITS.
Thanks.

That's strange. SAP documentation says:
"This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data."
Check you code. In debugger, set a watchpoint on VBRK-STCEG and check why the value gets lost.
Regards
Clemens

User Exit - VA01 / VA02 Sales Order, using Variant Configuration Fields

Similar Messages

Maybe you are looking for