User exit variable I_STEP=1 does not show default value WebI selection scr

Hello,
We have a BW query with a user exit variable. We have written user exit code under I_STEP = 1 so that the default value for the field is displayed on the selection screen to the user. Works very well on the BW side.
We based a universe on top of the query and then created a WebI report.
When the WebI report is executed the default value is NOT seen on the selection screen,
Note:
1. If the user exit variable is optional and we execute the report, the default value is NOT seen on the selection screen. However if the report is executed without entering any value for the field the logic under I_STEP = 1 is picked up and the report gets the correct output
1. If the user exit variable is mandatoryand we execute the report, the default value is NOT seen on the selection screen. The user now has to enter the value for the field.
The scheduled reports will work in case of optional user exit variable.
However this amounts to loss of functionality.
Is this a known bug?
Is there a way to display default values based on user exit variables on the WebI selection screen?
Kindly advice. Btw we are on XI 3.1 SP3
Rgds
Edited by: Anup Deshmukh on Jun 29, 2010 11:13 PM

OSS Note 1285993 - "Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe"  deals with this issue and has deemed it out of scope for XI 3.1 SP3.
Rgds

Similar Messages

  • Using transactio code to execute a report does not show default value

    Hi all ,
          I have given a default value of a field on my selection-screen by initialization in a hr report .
    I am using PNP database and default selction-screen in hr report category .
    While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
    Can any body tell why it is so ?
    Thanks & regards
    Sun

    Did you create the transaction as a report transaction?
    Rob

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • Report similar to MC$4 that does not show absolute values

    Hi all,
    We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
    Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
    Thanks in advance!
    George

    HI
    Your input criteria should contain all plant numbers and the period to be analyzed.  Execute the report and then select:  Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month.  Follow the options to export to Excel.  Report will be based on Plant, Storage location and Month.
    Regards

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Fiscal Year / Periods does not show properly in WebI and compunding

    Hi,
    I have few reports where I am using Fiscal Year /Period as filter.
    I have created a Universe on the top of a SAP BI Query and did not do any customization.
    Then I created a WebI report. In this report I created various filters beside Fiscal Year / Period. When I run report, filter window opens. I can select all other filters but when it comes to Fiscal Year / Period it does not show me the values I want to see. It shows AUG 0001, APR 0025 etc. I want to see AUG 2010, MAR 2009 etc so that I can select them and get the data of the required Fiscal Year / Period. In Cube I have the required data. If I select MAR 0010 etc I donu2019t get any data.
    On the other hand if I put fiscal Year / Period in columns or rows it shows the right value.
    If also run SAP BI Query and Fiscal Year / Period in Variable then on variable screen I can see the right value from where I can select and get the required result.
    Do I have to do any step at Universe level or something else?
    It seems that Fiscal Year / Period is compounding.
    Is there any help?
    Thanks
    Bashir Awan

    Ingo,
    for thanks for igniting my thoughts in this regards.
    Yes these values do exist in SAP BW.
    It is some how compunding the values at filter level.
    It does not let me see the whole value when filter screen popup in BOBJ.
    In SAP whole value shows when variable screen popup, I see three columns Fiscal Year / Period. Text, Posting Period Key, and Posting Year Key.
    Fiscal year / Period Text which shows Aug 2009, Posting Period Key which shows our period 1 to 16, and Fiscal year key which shows 2009 etc.
    Is there any setting in BOBJ which compunds the year for variable screen so that we may see the whole values for filters?
    thanks

  • Finder does not show all colors from selected color Labels

    Since a view days finder does not show all Color Label colors. When I select either yellow or green it is selected, but it does not show in the file list with details, I can see it in icon and 3 pane view, but not in the detail list view.
    does anybody know why or how? Or what plist files I might need to delete to get this reset?

    Create a new account, name it "test" and see how your labels work in that User acct in list view? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    Let us know and we'll troubleshoot this further.
    -mj
    [email protected]

  • Report S_ALR_87012000 Asset Register does not show correct values sums

    Hi,
    I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
    1-  the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990  - Asset history sheet
    2- if I put  an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
    Could you explain me why? Is there some program bug?
    Thanks in advance
    Giovanna

    Hi
    If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
    The execution for current year can have any date of the fiscal year for report execution
    BR,Ajay M

  • Multicolumn does not show any value when I tried to put a value on column 4 or above

    When I put a value in column 4 or above ( in any row ) multicolumn listbox doesn't show me any return. I got a example from NI forums and changed it to see if it works , but the results are the same.
    Does anyone know about it. I'm using labview 2009 9.0f3
    Thanks in advance

    Can you link to the example you are using?
    What is a "return" that it does not show? I am not familiar with these terms.
    Why don't you attach a simplified version of your VI with steps to demonstrate the problem
    LabVIEW Champion . Do more with less code and in less time .

  • User Exit PO MM06E005 - Screen does not exist

    Hello All,
    I created a new object for user exit 'EXIT_SAPMM06E_012' in Development System. This user exit is under the enhancement MM06E005. The user exit EXIT_SAPMM06E_012 will be used to produce an error message when saving a PO.
    After Transported the Project into Quality System and  I tried running transaction ME22->Select one line Item record in table control -> (Menu) ITEM -> Confirmations -> Overview   to confirm the PO. I have been getting a dump telling me that “SAPLXM06 Screen ‘0111’ Screen does not exist." This is because the screen exit was also included in the activation.
    When I have deactivated the Project its working fine.  This problem occurs only the activation of user exit.
    Thanks & Regards
    Sudheer

    hi,
    the problem when activating the exit you would have checked or activated the screen which currently is there in the development system , or you would have activated the screens and put them in a different request or in $tmp so when the request having the exit got transaported the screen code or activation was not taken along.
    Deactivate the exit and then deactivate the screens also.
    and then try to activate and put all in one request : deactivated and activations.
    Narayani
    Message was edited by:
            Narayani

  • Match code in report selection screen does not show any values for 0FISCPER

    Hi Experts,
    I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
    Thank you,
    Michal

    Hi,
    maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
    <removed by moderator>
    Michal
    Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

  • Adobe Form Section is Not Showing When Value is Selected from Dropdown List

    Hello Experts
    We have this issue where an ADOBE FORM is embedded in a WEBDYNPRO APPLICATION. 
    When selecting a value from the dropdown field in the ADOBE FORM, some particular section in the ADOBE FORM is not shown.
    Here's the ADS and NW versions that we were using.  We are running on EHP5 landscape.
    - ADS - 7.3 SPS 3
    - NW 7.3 SPS 3
    PS. The same program is working in EHP4 correctly.
    Any idea on how to resolve this issue?

    This is a custom built form, the thing is we just upgraded our system to EHP5 and we are in the test phase. The same form works in system in EHP4.
    Based on the dropdown list selection, there are some sections in the form which are hidden previously will be shown now. when you change the country in the dropdown the new sections appear. The sections will not be visible before you select the couuntry from dropdown.
    Should I upgrade my Adobe live cycle designer version to a higher one?
    Thanks

  • Safari 7.0.5 does not show an entire web site. Why ?

    Hi, I normally use Safari 7.0.5, and my home page is www.liquida.it
    Since three days ago, when I open Safari the home page of this web site is not displayed, even if I write it separately.
    I have already cancelled the cache memory and restored Safari to the original settings, buti apparently there is nothing to do.
    The strange thing is that if I try to open it with Firefox or Chrome it runs correctly.
    Is somebody so kind to suggest me what to do ?
    Thank you
    Franco

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • Output Preview does not show right values of Spots

    I have a document created in InDesign. It contains only 1 spot color (no CMYK). Acrobat shows worng spot values in Output Preview (100% for 100% spot, but 4% for 10% spot. Pitstop shows the right value. Can you tell me what is the problem?

    Hi Lisa,
    First you know for which transaction you want to print the form. For example if it Purchase Order then Transaction is ME22n or ME23n .
    The error you are getting might be because of one of the following reason.
    1) The output you are using should be configured for particular order number .For example if You want to print the form for a PO number 40000020 For this you must have configured output type in the messages of that order number.
    Go to ME22n give the order number  and press enter . In the application tool you can find messages button just click on that and it wil take you to other screen where you can give putput type print medium and printer in Comunication method and in firther data give  start immediately
    2)Let us suppose it was configured then the output must have configured properly.
    Thanks,
    Nageswar

  • The small symbols for bookmarks in the list does not show the right web page symbol? How can I get this right?

    I have a lot of short cuts to web pages in the list just under the web address. The symbol showing should be that of the web page but for some of the links the symbol shows the wrong symbol. For example it could be that CNN has the symbol of BBC (I don't have this exact problem but just as an example).

    This can be a problem with the file places.sqlite<br />
    See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    *CheckPlaces: https://addons.mozilla.org/firefox/addon/10897
    *Delete Bookmark Icons: http://www.sephiroth-j.de/1/mozilla/#delsiteicons

Maybe you are looking for

  • Trouble with Group By in RTF Template

    Hello All, I'm very new at RTF Template building, and I've spent hours trying to figure this out with no avail. I'm using BIP Desktop add-in for Word to load in my XML data and create some tables and charts. Right now I'm able to create a detail leve

  • Orientation is messed up

    Not sure what I did to cause this - Illustrators nudging now nudges in the wrong direction - and when I try to type freely, it goes at an angle? It's as if the canvas is the same but north has moved? Any ideas? Thanks.

  • Adobe CSI CS4 1.0.1 Fails to Install

    I'm trying to install the Services Update for CS4, which comes down as CSI CS4 1.0.1. I have tried the updater and manually installing the update and it fails everytime, but without any clue as to why its failing. I have serched through the logs and

  • Wrong Unit displaying in the QRY

    Hi Friends ,             I have a field in the report which is computed by Price/Qty , I have the price displaying in $ and the Qty displaying in EA. So the final field displaying in my report is $40/EA, but I wanted only $40. Please advice where I n

  • IMAQ Array to Image Bit Shift?

    Hi, I've been working with some 12 bit images from a camera and saving the results as 16 bit TIFFs using some of the Vision VIs.  I can save and read back in the TIFFs and all of the data stays intact, but if I try to open the saved TIFFs in another