User Exit which is triggered when we do the posting to accounting

Dear Guru,
Can any one provide list of User Exits which are triggred while Posting in accounting happens via MM transaction?
Regards,
Sandeep

Hello
Go through the link
http://www.easymarketplace.de/userexit.php
Regards

Similar Messages

User exit which gets triggered when a line item is deleted in va02

Hello all,
I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

Hello,
Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
BR
Sudhakar.

User Exit RV60AFZZ not Triggered When Processing IDOC

Hi,
I'm writing to seek some advice on why is the user exit RV60AFZZ not getting triggered when I do a vf01 bdc inside my inbouund IDOC function module. But when I try SHDB the user exit is getting triggered normally.
Thanks,
Mawi

Hi,
Yes I'm creating invoice using delivery orders, inside the idoc function module I'm using bdc call transaction vf01 but somehow it does not trigger the user exit.
But when I do manual vf01 in sap, the user exit is getting triggered.
I cant figure out why this is the behavior of sap.
Regards,
Mawi

Which user-exit or BAPI triggered when a schedule line is changed

Dear All,
Does anyone know which user-exit, enhancement or BAPI is triggered when we do change on schedule line item?
Let's say, I have two line schedule line item, then I do change for delivery date. After triggered "Item Availability" button, system will accumulate confirmed Qty on first line and second line into first line. And then the second line will remain zero.
I need to know, which enhancement or user exit or any standard FM do this process.
I searched, but not found any user exit or enhancement that will go through.
Best regards,
Dinivian.

Hi,
For MFBF there are sollowing user-exits....
XMRM0001 - Backflushing in Repetitive Manufacturing.
PTRM0001 - For lead column in REM planning Table.
SAPLRMPU - Customer Exit for Article Staging.
Reward points if useful....
Regards
AK

User exit for MFBF Transaction when we save the Transaction

Hi All,
I have a requirement like this I am generating batch numbers for MFBF Transactioin for this I have written code in the user exit 'EXIT_SAPLV01Z-002' this user exit will generate the Batch Number accordingly client requirement and update the batch number to the cust table which I have created,But now the issue is if we will not save the MFBF Transaction or it got some error and terminated the Transaction MFBF still the batch Number is updating to the custom table I want to find which user exit will trigger when we will save the docuement in the Transaction 'MFBF'?
Thanks&Regards
Mahesh

Hi Mahesh,
Check these user exits.
PTRM0001            User Exit for Lead Column in REM Planning Table
SAPLRMPU            Customer Exits for Material Staging
XMRM0001            User exits: Backflushing in Repetitive Manufacturing
No of Exits:          3

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

Need User Exit which wll allow to display a error message

Hello All,
i need a User Exit in Tx ME21N .
When user try to drag multiple PR for PO at that instant only there should be an User Exit which will restrict the user to doing so with a error message.

ME_CHECK_ALL_ITEMS
ME_CCP_ACTIVE_CHECK
MD_EXT_SUP
ME_DEFINE_CALCTYPE
MD_STOCK_TRANSFER
ME_PROCESS_PO_CUST
These are the BADIs gettting triggered while dragging the PR's to PO creation.
You can check any of these as per your requirement.
Check if the BADI 'ME_PROCESS_PO_CUST' is useful.

User-exit not getting triggered in VA32

Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.

Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks

User exit that gets triggered at the press of 'Enter' in IW42

Hi,
Is there any user exits that gets triggered at the press of Enter key in PM order confirmation IW42 transaction. Basically the requirement is to give a customized message at the order confirmation screen when the enter key is pressed.
Regards,
Prabaharan.G

Hi,
You may try the following enhancement points and exit respectively.
CMFU0001 E EXIT_SAPLCMFU_001
CMFU0002 E EXIT_SAPLCMFU_002
Pls reward points if useful.
Regards,
Renjith Michael.
Edited by: Renjith Michael on Jan 12, 2008 12:57 PM

Find out user exits which should trigger while saving billing doc.(VA01)

Hi All,
please can u help me to find out user exits which should trigger while saving billing documents for VA01 transaction...I have already z report to find the user-exit for any transaction.I have tried in that also.
Reply
Ulhas

Hi
Try these
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified
in the billing type table and can be changed in this user exit. This
user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program
RV60AFZZ)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program
RV60AFZC)
Depending on the number range, table TVFKD is used to set the
billing date (country-specific requirments in Italy).
USEREXIT_NUMBER_RANGE is automatically deactivated when this user
exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created.
It is used to provide the header and the item of the new billing
document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or
changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented
or changed.
User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
-   USEREXIT_RELI_XVBPAK_AVBPAK
-   USEREXIT_NEWROLE_XVBPAK_AVBPAK
-   USEREXIT_NEWROLE_XVBPAP_AVBPAK
e following user exits are available in report SAPLV60B for transfer
accounting (function group V60B):
EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the
accounting document. For example, you can change the business
transaction, "created on" date and time, the name of the person who
created it or the transaction with which the document was created.
EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting
document. This exit is processed once the ACCIT structure is filled
in with data from document header VBRK.
EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use
exit 003 to influence the ACCIT structure.
EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add
information to a GL account item (such as quantity specifications)
with this exit.
EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account
item, you can add to this data with this exit.
EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and
ACCHD
After the accounting document is filled in with data, you can use
exit 008 to change the document once again.
EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines
before they are created.
EXIT_SAPLV60B_0011: Change the parameter for cash account
determination or reconciliation account determination
You can use this exit to change inbound parameters in order to
influence account determination.
>
Thanks
Shiva

Debug an USER-EXIT which is present inside an INCLUDE

Hi folks,
i want to debug a include ' LVEDFF0E.' which is present in the program 'SAPLVEDF.
my user exit 'ZXEDFU02' is present in the include LVEDFF0E . This exit is to change the IDOC segmants.
i want to debug my user exit which is present inside a include.i tried so many times but control is not going to that point.
can anybody tell me how to debug that exit???
correct answers will be rewarded.
Thanks & Regards

Hi,
Try this way
/h> choose "breakpoints" from menu> breakpoint at >function module> enter EXIT_SAPLVEDF_002 and press enter press f8
a®

PO User Exit which pass PR Number

Dear All
Is there any PO user exit which can pass the PR number while creating a PO by adopting a PR number.
Requirement is to check PR amount before saving the newly created PO. If possible also specify the PR field in user exit.
Thanks

Hi,
Try User Exit MM06E005,Implemente EXIT_SAPMM06E_012
PR number is passed in field TEKPO-BANFN.
Regards
Pole

Can i know the user exits which should trigger while saving billing docu

hi,
please can u help me to find out user exits which should trigger while saving billing documents.

A couple years ago I downloaded this program, I think from SAPFANS. I don't take any credit for it...Not sure who originally wrote it. Just type in the t-code and hit execute.
*& Report name          : Identify and Drill-Down to SAP User Exits.   *
*& Program name         : ZZ_FIND_USER_EXITS                           *
REPORT ZZ_FIND_USER_EXITS
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65
MESSAGE-ID MM.
D A T A   D E F I N I T I O N                                        *
TABLES : TSTC,      " SAP Transaction Codes
         TADIR,     " Directory of Repository Objects
         MODSAPT,   " SAP Enhancements - Short Texts
         MODACT,    " Modifications
         TRDIR,     " System Table TRDIR
         TFDIR,     " Function Module
         ENLFDIR,   " Additional Attributes for Function Modules
         TSTCT.     " Transaction Code Texts
S E L E C T I O N   S C R E E N                                      *
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
I N T E R N A L   S T R U C T U R E S   &   T A B L E S              *
DATA : GT_TADIR LIKE TADIR OCCURS 0 WITH HEADER LINE.
V A R I A B L E S                                                    *
DATA :
       GV_FIELD1(30) TYPE C,
       GV_DEVCLASS    LIKE TADIR-DEVCLASS.
C O N S T A N T S                                                    *
CONSTANTS:
           GC_F     LIKE TRDIR-SUBC   VALUE 'F',
           GC_R3TR LIKE TADIR-PGMID VALUE 'R3TR',
           GC_FUGR LIKE TADIR-OBJECT VALUE 'FUGR',
           GC_SMOD LIKE TADIR-OBJECT VALUE 'SMOD',
           GC_PROG LIKE TADIR-OBJECT VALUE 'PROG'.
R A N G E S                                                          *
RANGES:
GR_VKORK      FOR WKBP-VKORG.
E V E N T   P R O C E S S I N G                                      *
INITIALIZATION.
AT SELECTION-SCREEN.
SELECT SINGLE PGMNA
    INTO TSTC-PGMNA
    FROM TSTC
    WHERE TCODE = P_TCODE.
IF SY-SUBRC <> 0.
    MESSAGE E899(MM)
      WITH TEXT-E01    " Input Transaction Code is Invalid.
           TEXT-E02.   " Please Correct !!
ENDIF.
SELECT SINGLE TTEXT
    INTO TSTCT-TTEXT
    FROM TSTCT
    WHERE SPRSL = SY-LANGU
      AND TCODE = P_TCODE.
START-OF-SELECTION.
CLEAR GV_DEVCLASS.
SELECT SINGLE DEVCLASS
    INTO GV_DEVCLASS
    FROM TADIR
    WHERE PGMID = GC_R3TR
      AND OBJECT = GC_PROG
      AND OBJ_NAME = TSTC-PGMNA.
IF SY-SUBRC <> 0.
    SELECT SINGLE SUBC
      INTO TRDIR-SUBC
      FROM TRDIR
      WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC = GC_F.         " Function Group
      SELECT SINGLE FUNCNAME
        INTO TFDIR-FUNCNAME
        FROM TFDIR
        WHERE PNAME = TSTC-PGMNA.
      SELECT SINGLE AREA
        INTO ENLFDIR-AREA
        FROM ENLFDIR
        WHERE FUNCNAME = TFDIR-FUNCNAME.
      CLEAR GV_DEVCLASS.
      SELECT SINGLE DEVCLASS
        INTO GV_DEVCLASS
        FROM TADIR
        WHERE PGMID    = GC_R3TR
          AND OBJECT   = GC_FUGR
          AND OBJ_NAME = ENLFDIR-AREA.
    ENDIF.
ENDIF.
SELECT *
    FROM TADIR
    INTO TABLE GT_TADIR
    WHERE PGMID = GC_R3TR
      AND OBJECT = GC_SMOD
      AND DEVCLASS = GV_DEVCLASS.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
          20(20) P_TCODE,
          45(36) TSTCT-TTEXT.
SKIP.
IF NOT GT_TADIR[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
           2 'Exit Name',
          21 SY-VLINE ,
          24 'Description',
          95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    SORT GT_TADIR BY OBJ_NAME.
    LOOP AT GT_TADIR.
      SELECT SINGLE MODTEXT
        INTO MODSAPT-MODTEXT
        FROM MODSAPT
        WHERE SPRSL = SY-LANGU
          AND NAME = GT_TADIR-OBJ_NAME.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/01 SY-VLINE,
             02 GT_TADIR-OBJ_NAME HOTSPOT ON,
             21 SY-VLINE,
             22 MODSAPT-MODTEXT,
             95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE GT_TADIR.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD GV_FIELD1.
IF GV_FIELD1(8) = 'GT_TADIR'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
ELSE.
    MESSAGE I899(MM)
      WITH TEXT-I01    " Click on the Exit Name to Drill-Down
           TEXT-I02.   " to SAP Enhancement Information.
ENDIF.
END-OF-SELECTION.
TOP-OF-PAGE.
S U B R O U T I N E S                                                *
E N D   O F   R E P O R T ****************************************

User exits which can be called from the bapi BAPI_ALM_ORDER_MAINTAIN

Hi Experts,
I was trying to change work orders using the BAPI_ALM_ORDER_MAINTAIN, but this does not allow me to update the order address, one way of updating the address is using recording, but i was looking for a way in which we can use some user exit which will be called from the BAPI so that i can update the address number in the final structure before the work order is saved (without having to go for recording)?

Hi,
you have restrictions to this .
Refurbishment orders are not supported.
The estimated costs cannot be processed - only the estimated overall costs of the order.
Notification data cannot be processed with the order BAPI, even if the settings in Customizing are such that the orders and notifications can be maintained on one screen. However, the system will create a notification with the order if this is specified in the Customizing settings.
Permits cannot be processed.
The order addresses cannot be processed.
Individual partner addresses cannot be maintained.
Regards

User Exit which runs after pressing SAVE button at VF01 Screen.

Dear all,
I need user Exit which runs after pressing SAVE button at VF01 Screen.
Kind Regards,

If you search the forum, you can find plenty of threads on this, for example Re: Badi or user exit for VF01 while save Can you let the forum know what exactly you want to achieve using user exit during saving of a billing document?
Regards,

User Exit which is triggered when we do the posting to accounting

Similar Messages

Maybe you are looking for