User Exits/BADI's in HR Mater Data PA30

Hi,
Hi,
When ever the Personnel's Qualification is Updated in PA30, I need to capture the Information and store it in a Custom Table to keep track of the change history information to create a report with micro level information like Qualification, Task, Coupon, Status (Pass/Fail), Qualified By, Changed By, Start Date, End Date Etc. The SAP Standard Infotype Extends the Qualification End Date when the personnel passed the qualification and maintains always One start date (Very Beginning Date) and One End Date. The Requirement is to capture the Qualification Information, Each time the Personnel goes through the Examination and Store the History for Future Reporting. Can any one please suggest me some possible solutions for this requirement.
Appreciate Your Help.
Thanks,
Kannan

Hi Kiran,
Thanks a lot for your reply. I checked those Exits/Badi's and none of them has the Proficiency in the Import Parameters. Actually I need to build validation logic inside the Exit/Badi, so that the custom table updates logic should work only for the Proficiency 0001.Do u have any Suggestions? Please let me know.
Appreciate your Help.
Thanks,
Kannan.

Similar Messages

  • User exit, badi or enhancement to validate data before saving for  qm02

    Hi,
    Currently, I have a requirement to validate the data of a notification before saving data in Tcode qm02.
    I have found an user exit to check data for tcode qm02. It works for task tab, I mean I can get the data under task tab of qm02 and do the validation. However, for the tab processing: I want to validate the partner name before saving but I can not get the list of partners which is in Processing tab.
    Please let me know if you could show me the user exit, enhancement, or Badi so that I can validate the data under processing tab in qm02.
    Thanks in advance,
    Hung To

    Hi Keshav.T,
    Currently I am using this exit to validate data for the tab "Task". However, for the tab "Processing" I can not get the data, let say Partner, to validate.
    Thanks,
    Hung To

  • User Exit/Badi to change the billing plan date when create sale order

    Experts,
    Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
    My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
    I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

    Hi,
      check the include MV45AFZB.
    Thanks & Regards,
    Sateesh.

  • MIGO User Exits / BADI

    Hi All,
            Please let me know which user exits / badi for MIGO which is effective at SAVE time (only for GRN) with using PO.
    Best Answer Best Points....
    Thanks In Advance

    Enhancement/ Business Add-in Description
    Enhancement
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0011 Read from RESB and RKPF for print list in MB26
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0009 Filling the storage location field
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0006 Customer function for WBS element
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0002 Customer function exit: Segment text in material doc. item
    Business Add-in
    MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
    MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
    MB_PHYSINV_INTERNAL Connection: Core Inventory and Retail AddOn
    MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
    MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
    MB_DOC_BADI_INTERNAL BAdIs when Creating a Material Document (SAP Internal)
    MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
    MB_DOCUMENT_BADI BAdIs when Creating a Material Document
    MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
    MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
    MB_CIN_LMBMBU04 posting of gr
    MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
    ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
    ARC_MM_MATBEL_CHECK Check Add-On-Specific Criteria for MM_MATBEL
    Regards.

  • User Exit/ Badi for Changing Quant parameters during TO Creation

    Hi Gurus,
    Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
    User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
    I will highly appreciate reply from Gurus.
    Regards,
    Gupta M

    Hi manish,
    Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
    Thanks,
    Shibashis

  • User exit/ badi needed for planned order create/change,collective ATP check

    Dear All,
    I'm looking for a user exit/ badi which can be used for planned orders at the stage of
    mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
    I need after collective availability check to perform the following:
    1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
    then
    2) to start a scheduling.
    Very appreciate your help.
    Best Regards,
    Andrey
    Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
    Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

    Dear,
    Use the BAPI : BAPI_PLANNEDORDER_CHANGE
    Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
    and the transaction MDAC Execute action for planned order
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    Delete planned order
    Assign the key for the respective action control to the materials in the material master (MRP 4 view).
    Please refer this thread,
    Re: MDVP for collective orders
    Regards,
    R.Brahmankar

  • User exit / BADI for training and event management

    Hi all,
    Can anybody tell me if there is any user exit / BADI for training and event management module?
    Thanks & regards,
    LOI

    Hi
    BADI's for Training and Event Management
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
    HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
    HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
    HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
    HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
    HRTEM_READ_OBJECT      Customer Enhancement: Name Format
    RHPV0001 Customer      Enhancement for Additional Checks for Booking
    Enhancemnet Spot:
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    ~~~Ganesh Kumar K.

  • To find out appropriate user exit/ badi for transaction VT01n

    Hi,
       I have the following requirement.
    Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document.  The rules for populating the value (SO, ST, PO and RA) are as follows:
    If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
    If all of the orders are STO orders, then the Cass shipment type should be "ST",
    If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
    If all of the orders are customer return orders, then the Cass shipment type should be "RA".
    I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
       Thanking in advance to give your suggestion in order to resolve it.
    With regards,
    Ajit.

    Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Just for your information the User exits available for VT01n are
    MV56AINI            Initialization of transaction control for transportation          
    V56AFCCH            Shipment processing: Check function code allowed                  
    V56AGTAR            User Exit for Filtering Shipping Unit Calculation                 
    V56ARCHV            Customer-spec. checks for archiving shipments                     
    V56ATKTX            Change the number of lines for text input in shipment             
    V56BMOD             Transportation processing: Field modification                     
    V56DISTZ            Shipment Processing: Determine Distance                           
    V56FCOPY            Shipment processing: Copy delivery data                           
    V56FSTAT            Shipment processing: Activities when setting a status             
    V56L0001            Status of Shipments for a Delivery                                
    V56LDELI            Read Delivery Data for Shipment Processing                        
    V56LOCID            Shipment Processing: Determine Location Identification            
    V56MVT04            Extensions for Collective Processing of Shipments                 
    V56SLDET            Shipment processing: Leg determination                            
    V56TDLIF            Filter Delivery Items for Shipment                                
    V56UCHCH            Shipment processing: Check whether changes were made              
    V56UCHCO            Check shipments are complete                                      
    V56UDLUP            Obsolete as of 4.6C: Delivery Update on Delivery Routines         
    V56UNUMB            Shipment number allocation                                        
    V56USTAT            User-individual definition of transportation planning status      
    V56USVDO            Update new objects for transport                                  
    V56USVDP            Preparation for updating new objects for transport?               
    Award points if helpful..
    Thanks

  • To find out user exit/ badi for the VT01n transaction triggered in Save

    Hi Friends,
              I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
    Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document.  The rules for populating the value (SO, ST, PO and RA) are as follows:
    If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
    If all of the orders are STO orders, then the Cass shipment type should be "ST",
    If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
    If all of the orders are customer return orders, then the Cass shipment type should be "RA".
    I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
    Thanking a lot in advance for giving the solution.
    With Regards,
    Ajit.

    Hi,
    This code will give you all the user-exits.
    Code:
    & Report ZPJA_PM002 (Ver4) &
    & PJA Consultancy Services (www.pjas.com) &
    & This report attmpts to find Enhancements, Program-Exits, BADIs &
    & and Business Transaction Events in a particular program/tcode. &
    & Other search options: &
    & Program: RPR_ABAP_SOURCE_SCAN &
    & FModule: &
    & Text Elements: &
    & P_DEVC Show user-exits from development class &
    & P_LIMIT Limit submit program selection &
    & P_FUNC Show function modules &
    & P_SUBM Show submit programs &
    & S01 Selection data (TCode takes precedence over program name) &
    report zpja_pm002
    no standard page heading
    line-size 221.
    data: tabix like sy-tabix,
    w_linnum type i,
    w_off type i,
    w_index like sy-tabix,
    w_include like trdir-name,
    w_prog like trdir-name,
    w_incl like trdir-name,
    w_area like rs38l-area,
    w_level,
    w_fsel like sy-ucomm, " Determination of screen field
    w_str(50) type c,
    w_funcname like tfdir-funcname.
    constants: c_fmod(40) type c value 'Function modules selected: ',
    c_subm(40) type c value 'Submit programs selected: ',
    c_col1(12) type c value 'Enhanmt Type',
    c_col2(40) type c value 'Enhancement',
    c_col3(30) type c value 'Program/Include',
    c_col4(20) type c value 'Enhancement Name',
    c_col5(40) type c value 'Enhancement Description',
    c_col6(8) type c value 'Project',
    c_col7(1) type c value 'S',
    c_col8(12) type c value 'ChangeName',
    c_col9(10) type c value 'ChangeDate'.
    Work Areas: ABAP Workbench
    data: begin of wa_d010inc.
    data: master type d010inc-master.
    data: end of wa_d010inc.
    data: begin of wa_tfdir.
    data: funcname type tfdir-funcname,
    pname type tfdir-pname,
    include type tfdir-include.
    data: end of wa_tfdir.
    data: begin of wa_tadir.
    data: devclass type tadir-devclass.
    data: end of wa_tadir.
    data: begin of wa_tstc.
    data: pgmna type tstc-pgmna.
    data: end of wa_tstc.
    data: begin of wa_tstcp.
    data: param type tstcp-param.
    data: end of wa_tstcp.
    data: begin of wa_enlfdir.
    data: area type enlfdir-area.
    data: end of wa_enlfdir.
    Work Areas: BADIs
    data: begin of wa_sxs_attr.
    data: exit_name type sxs_attr-exit_name.
    data: end of wa_sxs_attr.
    data: begin of wa_sxs_attrt.
    data: text type sxs_attrt-text.
    data: end of wa_sxs_attrt.
    Work Areas: Enhancements
    data: begin of wa_modsap.
    data: member type modsap-member.
    data: end of wa_modsap.
    data: begin of wa_modsapa.
    data: name type modsapa-name.
    data: end of wa_modsapa.
    data: begin of wa_modsapt.
    data: modtext type modsapt-modtext.
    data: end of wa_modsapt.
    Work Areas: Business Transaction Events
    data: begin of wa_tbe01t.
    data: text1 type tbe01t-text1.
    data: end of wa_tbe01t.
    data: begin of wa_tps01t.
    data: text1 type tps01t-text1.
    data: end of wa_tps01t.
    user-exits
    types: begin of ty_mod,
    member like modact-member,
    name like modact-name,
    status like modattr-status,
    anam like modattr-anam,
    adat like modattr-adat,
    end of ty_mod.
    data: w_mod type ty_mod.
    types: begin of t_userexit,
    type(12) type c,
    pname like trdir-name,
    txt(300),
    level type c,
    modname(30) type c,
    modtext(60) type c,
    modattr type ty_mod,
    end of t_userexit.
    data: i_userexit type standard table of t_userexit with header line.
    Function module developmnet classes
    types: begin of t_devclass,
    clas like trdir-clas,
    end of t_devclass.
    data: i_devclass type standard table of t_devclass with header line.
    types: begin of t_enlfdir,
    area type enlfdir-area,
    end of t_enlfdir.
    data: i_enlfdir type standard table of t_enlfdir with header line.
    Submit programs
    types: begin of t_submit,
    pname like trdir-name,
    level,
    done,
    end of t_submit.
    data: i_submit type standard table of t_submit with header line.
    Source code
    types: begin of t_sourcetab, "#EC * (SLIN lügt!)
    line(200), "#EC * (SLIN lügt!)
    end of t_sourcetab. "#EC * (SLIN lügt!)
    data: sourcetab type standard table of t_sourcetab with header line.
    data c_overflow(30000) type c.
    Description of an ABAP/4 source analysis token
    data: i_stoken type standard table of stokex with header line.
    data wa_stoken like i_stoken.
    Description of an ABAP/4 source analysis statement
    data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
    keywords for searching ABAP code
    types: begin of t_keywords,
    word(30),
    end of t_keywords.
    data: keywords type standard table of t_keywords with header line.
    function modules within program
    types: begin of t_fmodule,
    name like rs38l-name,
    pname like trdir-name,
    pname2 like trdir-name,
    level,
    bapi,
    done,
    end of t_fmodule.
    data: i_fmodule type standard table of t_fmodule with header line.
    & Selection Options &
    selection-screen begin of block selscr1 with frame title text-s01.
    parameter: p_pname like trdir-name memory id rid,
    p_tcode like syst-tcode,
    p_limit(4) type n default 100,
    p_devc like rihea-dy_ofn default ' ',
    p_func like rihea-dy_ofn default ' ',
    p_subm like rihea-dy_ofn default ' '.
    selection-screen end of block selscr1.
    & START-OF-SELECTION &
    start-of-selection.
    if p_pname is initial and p_tcode is initial.
    message e008(hrfpm). "Make entry on the selection screen
    stop.
    endif.
    ensure P_LIMIT is not zero.
    if p_limit = 0.
    p_limit = 1.
    endif.
    perform data_select.
    perform get_submit_data.
    perform get_fm_data.
    perform get_additional_data.
    perform data_display.
    & Form DATA_SELECT &
    form data_select.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get programs/includes' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    determine search words
    keywords-word = 'CALL'.
    append keywords.
    keywords-word = 'FORM'.
    append keywords.
    keywords-word = 'PERFORM'.
    append keywords.
    keywords-word = 'SUBMIT'.
    append keywords.
    keywords-word = 'INCLUDE'.
    append keywords.
    if not p_tcode is initial.
    get program name from TCode
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    if not wa_tstc-pgmna is initial.
    p_pname = wa_tstc-pgmna.
    TCode does not include program name, but does have refereve TCode
    else.
    select single param from tstcp into wa_tstcp-param
    where tcode eq p_tcode.
    if sy-subrc = 0.
    check wa_tstcp-param(1) = '/'.
    check wa_tstcp-param+1(1) = '*'.
    if wa_tstcp-param ca ' '.
    endif.
    w_off = sy-fdpos + 1.
    subtract 2 from sy-fdpos.
    if sy-fdpos gt 0.
    p_tcode = wa_tstcp-param+2(sy-fdpos).
    endif.
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    p_pname = wa_tstc-pgmna.
    if sy-subrc <> 0.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    else.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    endif.
    endif.
    Call customer-function aus Program coding
    read report p_pname into sourcetab.
    if sy-subrc > 0.
    message e017(enhancement) with p_pname raising no_program."#EC *
    endif.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    overflow into c_overflow
    with includes.
    if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
    message e130(enhancement) raising syntax_error. "#EC *
    endif.
    check I_STOKEN for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '0'.
    w_prog = ''.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endform. "DATA_SELECT
    & Form GET_FM_DATA &
    form get_fm_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get function module data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure. "#EC *
    Function module data
    sort i_fmodule by name.
    delete adjacent duplicates from i_fmodule comparing name.
    loop at i_fmodule where done ne 'X'.
    clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
    refresh: i_stoken, i_sstmnt, sourcetab.
    store function groups
    select single area from enlfdir into wa_enlfdir-area
    where funcname = i_fmodule-name.
    i_enlfdir-area = wa_enlfdir-area.
    append i_enlfdir.
    Store development classes
    if not wa_enlfdir-area is initial.
    select single devclass into wa_tadir-devclass
    from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = wa_enlfdir-area.
    check not wa_tadir-devclass is initial.
    move wa_tadir-devclass to i_devclass-clas.
    append i_devclass.
    endif.
    clear wa_tfdir.
    select single funcname pname include from tfdir into wa_tfdir
    where funcname = i_fmodule-name.
    check sy-subrc = 0.
    call function 'FUNCTION_INCLUDE_SPLIT'
    exporting
    program = wa_tfdir-pname
    importing
    group = w_area.
    concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
    i_fmodule-pname = w_include.
    i_fmodule-pname2 = wa_tfdir-pname.
    modify i_fmodule.
    read report i_fmodule-pname into sourcetab.
    if sy-subrc = 0.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    message e130(enhancement) raising syntax_error.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '1'.
    w_prog = i_fmodule-pname2.
    w_incl = i_fmodule-pname.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    endloop.
    sort funtion groups
    sort i_devclass.
    delete adjacent duplicates from i_devclass.
    sort i_enlfdir.
    delete adjacent duplicates from i_enlfdir.
    endform. "GET_FM_DATA
    & Form GET_SUBMIT_DATA &
    form get_submit_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get submit data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    w_level = '0'.
    loop at i_submit where done ne 'X'.
    check i_submit-pname ne p_pname. " ensure not the same as origianl program
    clear: i_stoken, i_sstmnt, sourcetab.
    refresh: i_stoken, i_sstmnt, sourcetab.
    read report i_submit-pname into sourcetab.
    if sy-subrc <> 0.
    delete i_submit.
    continue.
    else.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    continue.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_prog = i_submit-pname.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    restrict number of submit program selected for processing
    describe table i_submit lines w_linnum.
    if w_linnum ge p_limit.
    w_level = '1'.
    endif.
    i_submit-done = 'X'.
    modify i_submit.
    endloop.
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    endform. "GET_SUBMIT_DATA
    & Form DATA_SEARCH &
    form data_search tables p_stoken structure stoken
    using p_level p_prog p_incl.
    loop at p_stoken.
    clear i_userexit.
    tabix = sy-tabix + 1.
    i_userexit-level = p_level.
    if i_userexit-level = '0'.
    if p_incl is initial.
    i_userexit-pname = p_pname.
    else.
    concatenate p_pname '/' p_incl into i_userexit-pname.
    endif.
    else.
    if p_incl is initial.
    i_userexit-pname = p_prog.
    else.
    concatenate p_prog '/' p_incl into i_userexit-pname.
    endif.
    endif.
    Include
    if p_stoken-str eq 'INCLUDE'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs 'STRUCTURE'.
    check not wa_stoken-str cs 'SYMBOL'.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Enhancements
    if p_stoken-str eq 'CUSTOMER-FUNCTION'.
    clear w_funcname.
    read table p_stoken index tabix.
    translate p_stoken-str using ''' '.
    condense p_stoken-str.
    if p_prog is initial.
    concatenate 'EXIT' p_pname p_stoken-str into w_funcname
    separated by '_'.
    else.
    concatenate 'EXIT' p_prog p_stoken-str into w_funcname
    separated by '_'.
    endif.
    select single member from modsap into wa_modsap-member
    where member = w_funcname.
    if sy-subrc = 0. " check for valid enhancement
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    append i_userexit.
    else.
    clear wa_d010inc.
    select single master into wa_d010inc-master
    from d010inc
    where include = p_prog.
    concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
    separated by '_'.
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    endif.
    endif.
    BADIs
    if p_stoken-str cs 'cl_exithandler='.
    w_index = sy-tabix + 4.
    read table p_stoken index w_index into wa_stoken.
    i_userexit-txt = wa_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-type = 'BADI'.
    append i_userexit.
    endif.
    Business transaction events
    if p_stoken-str cs 'OPEN_FI_PERFORM'.
    i_userexit-type = 'BusTrEvent'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-modname = i_userexit-txt+16(8).
    case i_userexit-txt+25(1).
    when 'E'.
    clear wa_tbe01t.
    select single text1 into wa_tbe01t-text1 from tbe01t
    where event = i_userexit-txt+16(8)
    and spras = sy-langu.
    if wa_tbe01t-text1 is initial.
    i_userexit-modtext = ''. "#EC NOTEXT
    else.
    i_userexit-modtext = wa_tbe01t-text1.
    endif.
    i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
    when 'P'.
    clear wa_tps01t.
    select single text1 into wa_tps01t-text1 from tps01t
    where procs = i_userexit-txt+16(8)
    and spras = sy-langu.
    i_userexit-modtext = wa_tps01t-text1.
    i_userexit-modname+8 = '/Process'.
    endcase.
    append i_userexit.
    endif.
    Program exits
    if p_stoken-str cs 'USEREXIT_'.
    i_userexit-type = 'Program Exit'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    append i_userexit.
    endif.
    Submit programs
    if p_stoken-str cs 'SUBMIT'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
    replace all occurrences of '''' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Perform routines (which reference external programs)
    if p_stoken-str cs 'PERFORM'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if not wa_stoken-ovfl is initial.
    w_off = wa_stoken-off1 + 10.
    w_str = c_overflow+w_off(30).
    find ')' in w_str match offset w_off.
    w_off = w_off + 1.
    wa_stoken-str = w_str(w_off).
    endif.
    check wa_stoken-str cs '('.
    w_off = 0.
    while sy-subrc = 0.
    if wa_stoken-str+w_off(1) eq '('.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    replace all occurrences of ')' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    append i_submit.
    endif.
    exit.
    else.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    shift wa_stoken-str left deleting leading space.
    endif.
    endwhile.
    endif.
    Function modules
    if p_stoken-str cs 'FUNCTION'.
    clear i_fmodule.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if wa_stoken-str cs 'WF_'.
    if wa_stoken-str cs 'IDOC'.
    break-point.
    endif.
    if wa_stoken-str cs 'BAPI'.
    i_fmodule-bapi = 'X'.
    endif.
    replace first occurrence of '''' in wa_stoken-str with space.
    replace first occurrence of '''' in wa_stoken-str with space.
    if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
    clear wa_tfdir.
    concatenate wa_stoken-str '%' into wa_stoken-str.
    select single funcname into wa_tfdir-funcname from tfdir
    where funcname like wa_stoken-str.
    if sy-subrc = 0.
    i_fmodule-name = wa_tfdir-funcname.
    else.
    continue.
    endif.
    else.
    i_fmodule-name = wa_stoken-str.
    endif.
    read table i_fmodule with key name = i_fmodule-name.
    if sy-subrc <> 0.
    i_fmodule-level = p_level.
    append i_fmodule.
    endif.
    endif.
    endloop.
    endform. "DATA_SEARCH
    & Form GET_ADDITIONAL_DATA &
    form get_additional_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get additional data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    loop at i_userexit.
    Enhancement data
    if i_userexit-type cs 'Enh'.
    clear: wa_modsapa.
    select single name into wa_modsapa-name from modsap
    where member = i_userexit-txt.
    check sy-subrc = 0.
    i_userexit-modname = wa_modsapa-name.
    clear wa_modsapt.
    select single modtext into wa_modsapt-modtext from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_modsapt-modtext.
    MOH - enhancement to get the project name
    clear w_mod.
    select single modactmember modactname modattr~status
    modattranam modattradat
    into w_mod
    from modact
    inner join modattr
    on modattrname = modactname
    where modact~member = wa_modsapa-name
    and modact~typ = space.
    i_userexit-modattr = w_mod.
    MOH - eoe
    endif.
    BADI data
    if i_userexit-type eq 'BADI'.
    clear wa_sxs_attr.
    select single exit_name into wa_sxs_attr-exit_name from sxs_attr
    where exit_name = i_userexit-txt.
    if sy-subrc = 0.
    i_userexit-modname = i_userexit-txt.
    else.
    i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
    endif.
    clear wa_sxs_attrt.
    select single text into wa_sxs_attrt-text from sxs_attrt
    where exit_name = wa_sxs_attr-exit_name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_sxs_attrt-text.
    endif.
    modify i_userexit.
    endloop.
    get enhancements via program package
    clear wa_tadir.
    select single devclass into wa_tadir-devclass from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = p_pname.
    if sy-subrc = 0.
    clear: wa_modsapa, wa_modsapt.
    select name from modsapa into wa_modsapa-name
    where devclass = wa_tadir-devclass.
    select single modtext from modsapt into wa_modsapt-modtext
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    read table i_userexit with key modname = wa_modsapa-name.
    if sy-subrc <> 0.
    i_userexit-modtext = wa_modsapt-modtext.
    i_userexit-type = 'Enhancement'. "#EC NOTEXT
    i_userexit-modname = wa_modsapa-name.
    i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
    i_userexit-pname = 'Unknown'. "#EC NOTEXT
    append i_userexit.
    endif.
    endselect.
    endif.
    Get IDOCs
    loop at i_devclass.
    endloop.
    endform. "GET_ADDITIONAL_DATA
    & Form DATA_DISPLAY &
    form data_display.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Prepare screen for display' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_userexit by type txt modname.
    delete adjacent duplicates from i_userexit comparing txt modname.
    format headings
    write: 'Enhancements from main program'. "#EC NOTEXT
    write: /.
    uline.
    format color col_heading.
    write: / sy-vline,
    (12) c_col1, "Enhanmt Type
    sy-vline,
    (40) c_col2, "Enhancement
    sy-vline,
    (30) c_col3, "Program/Include
    sy-vline,
    (20) c_col4, "Enhancement name
    sy-vline,
    (60) c_col5, "Enhancement description
    sy-vline,
    (8) c_col6, "Project
    sy-vline,
    (1) c_col7, "S
    sy-vline,
    (12) c_col8, "ChangeName
    sy-vline,
    (10) c_col9, "ChangeDate
    sy-vline.
    format reset.
    uline.
    format lines
    loop at i_userexit.
    set line colour
    case i_userexit-type.
    when 'Enhancement'.
    format color 3 intensified off.
    when 'BADI'.
    format color 4 intensified off.
    when 'BusTrEvent'.
    format color 5 intensified off.
    when 'Program Exit'.
    format color 6 intensified off.
    when others.
    format reset.
    endcase.
    write: / sy-vline,
    i_userexit-type,
    sy-vline,
    i_userexit-txt(40),
    sy-vline,
    i_userexit-pname(30),
    sy-vline,
    i_userexit-modname(20),
    sy-vline,
    i_userexit-modtext(60),
    sy-vline,
    i_userexit-modattr-name,
    sy-vline,
    i_userexit-modattr-status,
    sy-vline,
    i_userexit-modattr-anam,
    sy-vline,
    i_userexit-modattr-adat no-zero,
    sy-vline.
    hide: i_userexit-type,
    i_userexit-txt,
    i_userexit-pname,
    i_userexit-modname,
    i_userexit-modtext.
    endloop.
    format reset.
    uline.
    user-exits from development class of function modules
    if p_devc = 'X'.
    write: /.
    write: / 'User-exits from function module development class'."#EC NOTEXT
    write: 157''.
    uline (90).
    write: 157''.
    loop at i_devclass.
    clear wa_modsapa.
    select name from modsapa into wa_modsapa
    where devclass = i_devclass-clas.
    select single name modtext into corresponding fields of wa_modsapt
    from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    format color 3 intensified off.
    write: / sy-vline,
    (12) 'Enhancement',
    sy-vline,
    wa_modsapa-name,
    sy-vline,
    wa_modsapt-modtext,
    sy-vline.
    endselect.
    endloop.
    uline (90).
    format reset.
    endif.
    describe table i_fmodule lines w_linnum.
    write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_func = 'X'.
    display fuction modules used in program
    uline (38).
    write: 157''.
    loop at i_fmodule.
    write: sy-vline,
    i_fmodule-name,
    sy-vline,
    i_fmodule-bapi,
    sy-vline.
    write: 157''.
    endloop.
    uline (38).
    write: 157''.
    endif.
    describe table i_submit lines w_linnum.
    write: / c_subm , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_subm = 'X'.
    display submit programs used in program
    uline (44).
    write: 157''.
    loop at i_submit.
    write: sy-vline,
    i_submit-pname,
    sy-vline.
    write: 157''.
    endloop.
    uline (44).
    endif.
    issue message with number of user-exits displayed
    describe table i_userexit lines w_linnum.
    message s697(56) with w_linnum.
    endform. "DATA_DISPLAY
    & User Selection Processing &
    at line-selection.
    get cursor field w_fsel.
    case w_fsel.
    when 'I_USEREXIT-MODNAME'.
    case i_userexit-type.
    when 'Enhancement'.
    set parameter id 'MON' field i_userexit-modname.
    call transaction 'SMOD' and skip first screen.
    when 'BADI'.
    check i_userexit-modname ne 'Dynamic call'.
    set parameter id 'EXN' field i_userexit-modname.
    call transaction 'SE18' and skip first screen.
    when 'BusTrEvent'.
    submit rfopfi00 with attr_typey_selm = 'A'
    with event = i_userexit-modname(8)
    via selection-screen
    and return.
    when others.
    endcase.
    when 'I_USEREXIT-PNAME'.
    check i_userexit-modname ne 'Unknown'.
    w_off = 0.
    find '/' in i_userexit-pname match offset w_off.
    if w_off = 0.
    set parameter id 'RID' field i_userexit-pname.
    call transaction 'SE38' and skip first screen.
    else.
    w_off = w_off + 1.
    w_prog = i_userexit-pname+w_off.
    set parameter id 'RID' field w_prog.
    call transaction 'SE38' and skip first screen.
    endif.
    when others.
    endcase.
    Feel free to revert back.
    --Ragu

  • Exit/Badi for Updating Actual Start Date in CJ20N

    Dear Experts,
    In transaction CJ20N, under Dates Tab for a particular Activity, there is one field viz. Act i.e. Actual start: Execution (date). My requirement is to display PR date in this field. Besides this, Actual finish: Execution (date) should also get updated depending on the Duration field.
    I searched all the exits in the package 'CN' and 'CORU', but none of them seems to be useful
    Please suggest a user exit/BAdI which could help resolve this.
    Thanks in advance

    Hi,
    That BADI would trigger when you change any thing on the WBS and hit save.
    WORKORDER_UPDATE-for network
    Regards,
    Himanshu

  • User-exit/BADI for version tab in ME22N

    Dear Friends,
    I have a requirement pertaining to user exit/BADI.
    In ME22n in version tab when ever we change any data of PO the Version Completed check box should be checked.
    Please let me know about the User Exit to be used and few lines of Pseudo code to proceed further.
    Thanks,
    Anshul

    Dear Dave,
    Check any enhancement Point is available to inlcude your logic in that place.
    With Regards,
    Selvan.M

  • Is there any user exit/ badi to populate the partner bank type for   F-63.

    Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ‘ZFI_FOAP_CDITEMS_00001011’ having BKPF and BSEG as only import parameters so I can’t change the value for BSEG-BVTYP.
    So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
    Thanks in Advance,
    Steevan

    hi,
    Below r the user exit related to transaction  F-63.
    Check out if any of them will solve ur Query..
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)
    Reward points if helpful,
    Regards,
    Brijesh

  • User Exit / Badi / BTE for Asset creation A ?

    Hi Experts,
    I need User Exit  / BADI / BTE for asset Creation.
    After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
    i have tried all this.But no one is triggering after saving the As01 transaction.
    Exit Name           Description                                                                               
    AAPM0001            Integration of asset accounting and plant maintenance                    
    AFAR0003            External changeover method                                               
    AFAR0004            Determination of proportional values for retirement                      
    AINT0004            Change amount posted for certain areas                                   
    AINT0005            Dummy for extended syntax check. Do not use.                             
    AISA0001            Assign Inventory Number                                                  
    AIST0001            Exchange number range in master data maintenance                         
    AIST0002            Customer fields in asset master                                          
    AMSP0002            Determine relationship type for two company codes                        
    TRAN0001            User exit for asset transfer           
    Please suggest if anybody worked on this.
    regards,
    Imran

    Hi,
    Check out the following posts pertaining to similar topic.
    Change Asset Workflow
    Asset Management WORKFLOW
    Regards
    Sreekanth

  • Request for info. on USER EXIT/BADI for FB60

    Hi,
    This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
    ]Please guide some alternative solution rather than user exit and badi.
    I dont think the following user exit and badi are used for withholding tax.
    I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
    F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002 FIDCC1: Change IDoc/do not send
    F050S003 FIDCC2: Change IDoc/do not send
    F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001 Balance Sheet Adjustment
    FARC0002 Additional Checks for Archiving MM Vendor Master Data
    FEDI0001 Function Exits for EDI in FI
    RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00 Line item display: Checking of selection conditions
    RFKORIEX Automatic correspondence
    SAPLF051 Workflow for FI (pre-capture, release for payment)
    Badi
    FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
    Every expert answer will be rewarded.
    Thanks in advance
    Cra

    Try Business Transaction Events. Transaction code BERP.
    Regards,
    Zoltá

  • User Exit/BADI for AS01 ( Asset Creation )

    Hi Xperts,
    My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
    Can anyone suggest user exit/BADI which suit this requirement.
    I have gone through forum search, but not found suitable object.
    Ram.

    Hi Ram,
    Check out below Badi and Enhancement
    BADI
    IHSA_LIST_EDITING
    ENHANCEMRNT
    EXIT_SAPLAAPM_002
    EXIT_SAPLAIST_001
    EXIT_SAPLAIST_002
    EXIT_SAPLAIST_003
    THANKS & REGARDS
    G.Vendhan
    Edited by: vendhan g on Jul 24, 2009 12:33 PM

Maybe you are looking for