User exits LVKMPTZZ and LVKMPFZ1 in credit management
Hello all,
We want to activate these user exits but it looks like this is only possible by registring and amending the standard includes. There is no call to a 'Z' function which you find in other user exits.
Am I correct in this and has anyone implemented these user exits before ?
Thanks and regards,
Arend
That is correct. That is the way User Exits used to work in the <i>old days.</i> Customer Functions (CMOD) didn't come along until the 3.x days.
Similar Messages
-
Credit Management: User Exit LVKMPTZZ and LVKMPFZ1
Hi,
I'm trying to implement crdit management and have a special requirment which is not satified by the standard risk control checks.
Hence i'm planning to implement the USER1 check in the risk catogery.
I'm aware that some ABAP code has to be done to activate and the user exits are LVKMPTZZ and LVKMPFZ1.
Where should be the code written LVKMPTZZ or LVKMPFZ1.
I guess the code has to be written in LVKMPTZZ and call the exit LVKMPFZ1 which in turns call the function module SD_ORDER_CREDIT_CHECK.
Am I true in my understanding.
Does editing LVKMPTZZ SAP access key.
Please help.
Thank you in advance.Hiii
You can write the code to call the funtion module for credit check in LVKMPTZZ but for same you need Access key from SAP to edit the Include.
Regards
Shambhu Sarkar -
Using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management
Hi
How to find using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management .
Plz provide path
Regards
RohitHi,
You can find exits through transactions# SMOD & CMOD also.
Regards
Chandra -
User exit EXIT_SAPLL03T_002 and jobs
Hi everybody,
I have a problem with user exit EXIT_SAPLL03T_002 and trx LT12, i put code (the code is in the end) in the user exit in order to update the field QNAME from the standar table LTAP, the sentences for the update are in a job.
The problem is when a run the LT12, put the order and press enter the trx finish normally, but when i see the jobs resumen (SM37) there isnt any job.
Thank you for your help, see you.
INCLUDE ZXLTOU02 *
DATA:
WJ_JTANUM LIKE LTAP-TANUM,
WJ_LGNUM LIKE LTAP-LGNUM,
WJ_WERKS LIKE LTAP-WERKS,
WJ_USER LIKE SY-UNAME,
Parametros para el Job
l_numero LIKE tbtcjob-jobcount, "ID de un job de fondo
l_fecha LIKE tbtcjob-laststrtdt, "Fecha de ejecución más tardía
l_hora LIKE tbtcjob-laststrttm, "Ultima hora de ejecución para
l_jobname LIKE tbtco-jobname VALUE 'JOB_RF',
W_USER LIKE SY-UNAME,
W_HORA LIKE SY-UZEIT,
W_DIA LIKE SY-DATUM.
GET PARAMETER ID 'mb_usuario' FIELD W_USER.
Solo lo realiza para la transaccion LM05 y LM07
y si es por logueo No SAP
***ANTIGUO
*IF ( SY-TCODE EQ 'LM05' OR
SY-TCODE EQ 'LM07' OR SY-TCODE EQ 'LM03' OR
SY-TCODE EQ 'LM04') AND ( W_USER NE '' ).
**********ACTUALIZADO 07/02*********
IF ( SY-TCODE EQ 'LM05' OR
SY-TCODE EQ 'LM07' OR SY-TCODE EQ 'LM03' OR
SY-TCODE EQ 'LM04' OR SY-TCODE EQ 'LT12' ) AND ( W_USER NE '' ).
ojo
UPDATE ZTMB_USERCOLA
SET STATU = ' ' DOCNUM = ' '
WHERE
BNAME = W_USER.
GET PARAMETER ID 'mb_hora' FIELD W_HORA.
GET PARAMETER ID 'mb_dia' FIELD W_DIA.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = l_jobname
IMPORTING
jobcount = l_numero
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
SUBMIT ZUPDATE_LTAP
AND RETURN
VIA JOB l_jobname NUMBER l_numero
WITH WJ_TANUM = T_LTAP_VB-TANUM
WITH WJ_LGNUM = T_LTAP_VB-LGNUM
WITH WJ_WERKS = T_LTAP_VB-WERKS
WITH WJ_USER = W_USER.
Llama a la funcion para cerrar el Job
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_numero
jobname = l_jobname
strtimmed = 'X' "Inicio inmediato
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
ENDIF.
REPORT ZUPDATE_LTAP .
PARAMETERS:
WJ_TANUM LIKE LTAP-TANUM, " Numero de OT
WJ_LGNUM LIKE LTAP-LGNUM, " Almacen
WJ_WERKS LIKE LTAP-WERKS, " Centro
WJ_USER LIKE SY-UNAME, " Usuario SAP
W_QNAME LIKE LTAP-QNAME.
data: w_actual, w_timeout type i.
Actualiza el campos de usuario
w_actual = '0'.
w_timeout = 0.
while w_actual = '0' and w_timeout < 300.
w_timeout = w_timeout + 1.
WAIT UP TO 7 SECONDS.
UPDATE LTAP
SET QNAME = WJ_USER ZZRF_BNAME = WJ_USER
WHERE
TANUM = WJ_TANUM
AND
LGNUM = WJ_LGNUM
AND
WERKS = WJ_WERKS.
AGREGANDO 4 ENERO
UPDATE ZTMB_USERCOLA
SET TPICKEO = SY-UZEIT FPICKEO = SY-DATUM
WHERE
LGNUM = WJ_LGNUM
AND
BNAME = WJ_USER.
AGREGANDO 4 ENERO
if sy-subrc = 0.
w_actual = '1'.
UPDATE LTAK SET ZZRF_BNAME = WJ_USER
WHERE TANUM = WJ_TANUM AND
LGNUM = WJ_LGNUM.
endif.
commit work.
endwhile.Hi,
Check the print parameters. Probably after execution you may be deleting the job.
You can change the print parameters during runtime.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
no_dialog = 'X'
user = sy-uname
IMPORTING
OUT_ARCHIVE_PARAMETERS =
out_parameters = params
valid = ws_valid.
IF ws_valid <> space.
params-pdest = 'LOCL'. "Destination
params-primm = ''. "Print Immediately
params-prnew = 'X'. "New Spool Request.
params-armod = '1'. "Print: Archiving Mode - Print Only
params-linct = 65. "Rows
params-linsz = 255. "Cols
params-paart = 'X_65_255'.
params-prrec = sy-uname. "User name
params-prsap = ''. "Print: SAP Cover Page
params-prunx = ''. "PRINT: Host spool cover page
params-prcop = '001'. "number of copies
SUBMIT zmib_fiber_link_background
WITH file = i_file_list-name
WITH rb1 = space
WITH rb2 = c_x
WITH p_launch = c_x
VIA JOB ws_c_session NUMBER ws_c_jobnum
EXPORTING LIST TO MEMORY
TO SAP-SPOOL
WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS params
AND RETURN.
endif.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = ws_c_jobnum
jobname = ws_c_session
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
Also check the sy-subrc after JOB_OPEN.
Regards
Subramanian -
Please send material or good lionk on USER-EXIT,BADI and ENHANCEMENT
Hi All,
Please send some step by step material or good lionk on USER-EXIT,BADI and ENHANCEMENT which will be usefull for beginners like me.
Thanks in advance
SrikantaHi Srikanta,
Please see the SDN page for ABAP Enhancements and Modifications:
https://www.sdn.sap.com/irj/sdn/abap?rid=/webcontent/uuid/109f5161-ee76-2910-cb99-db10b559ef4b [original link is broken]
Cheers,
Ville -
Dear Experts,
I am pretty new in BAPI,BADI ,BDC,ALE ,IDOC,USER EXIT,VALIDATION AND SMART FORMS.
Pls let me know for these topics shall i put the question in this community or should i put in any other form. Pl suggest me .
Regards
ShivasPlz SEARCH in SCN before posting ,you will get lot of posts .
Don't use all caps in the subject line -
User exit for expenses report in travel management
Hi All...
What is the user exit for expenses report in travel management with T Code PR04
itz urgent
with regards,
LNHere are user exits for tcode PR04:
Exit Name Description
FITR0001 User exit: Delete/Reorganize trip statistics
FITR0002 User exit: Create/Change trip statistics
FITR0003 User exit: Save trip (PR01, PR04, PR05)
FITR0005 User Exit: Save Trip (PR01, PR04, PR05)
RPRCST01 Customer Exit for Travel Expenses -
Difference between user exit,enhancement and BAdi
hello guys,
what is the difference between user exit,enhancement and BAdi.
Please do let me know..
Thanks in advance.
regards,
praveen.Pls do search the forum before posting*
-
User exit theory and practical knowledge (Pls help experts)
Hi Experts,
Kindly help me to know about user exit.
Thanks in advance
Will reward points.Hi,
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program
SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits?
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD.
Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction VA01 .
- Go to transaction CMOD
- Create a project called ZVA01
- Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder.
Note that Sold-to-party now automatically is "2155"
Regards,
M.K -
A/R User Exit Spec and code
The spec -
1. Canadian tax - currently based on Freight type: Read the country(?) Ship-from (plant jurisdiction) to Ship-to(customer jurisdiction) and the inco term on the line item of the sales order and if it's not equal to 'DDP' the line item tax classification will be set to '0' exempt. (This is freight that comes into Canada from the US)
We will look at the shipto and shipfrom txjcd on the sales order document and billing document along with the inco term logic and we will tax freight when they are both Canada
Example Scenario:
For Freight charges where the Ship from is in Canada (Bedco, Artmedco, etc) and the Ship-to is in Canada the freight will always be taxable regardless of the inco term. This is freight that ships within Canada, no boarder crossing.
2. Regular Freight - US & Canada: If separate line item on sales order, it may be exempt from tax based upon state. revisit
a. D.1 Freight included on the line item
i. The freight is passed to the external system by populating the field FREIGHT. The freight amount is always included in the base amount.
ii. An example to fill the freight using the user-exit:
iii. In the customer pricing procedure (for example ZUSA01) enter 4 in the subtotal field of the freight condition type (OTC must have this configuration in the pricing procedure for the freight pricing conditions).
iv. In the customer structure CI_TAX_INPUT_USER, add the field KZWI4 as in KOMP-KZWI4.
v. In the user-exit, add the code CH_USER_CHANGED_FIELDS-FREIGHT_AM = I_INPUT_USER-KZWI4.
3. For PO Specific A/R Tax Exemptions using material tax class of 2, pass the TAXM1 field to the ACCOUNT_NO field in Taxware
oSolution:
For PO Specific Tax Exemptions CSR will go to the line item detail Billing Tab, Tax Classification field (TAXM1) and change that to 2 One-Time Exemption. Configuration complete.
CSR will go to the Text Tab, Internal Item Notice and CSR will provide a brief description as to why that line is tax exempt.
This the code----
TABLES: KNVV, KNA1, KOMK, MLAN, T001W, KNVI.
DATA: w_taxm1 LIKE mlan-taxm1,
i_kna1 LIKE kna1,
c_com_tax type com_tax,
i_komk LIKE KOMK.
*--- if this freight comes into canada from US then set TAXM1 to 0
*----otherwise set TAXM1 to 2 and apply frieght charges. Set ACCNT_CLS
*----to 'Y' each time TAXM1 is passed to ACCNT_NO.
IF KNA1-LAND1 EQ 'CA'.
IF C_COM_TAX-TXJCD_SF EQ C_COM_TAX-TXJCD_ST.
CH_USER_CHANGED_FIELDS-FREIGHT_AM = I_INPUT_USER-KZWI4.
w_taxm1 = 2.
CH_USER_CHANGED_FIELDS-ACCNT_NO = W_TAXM1.
CH_USER_CHANGED_FIELDS-ACCNT_CLS = 'Y'.
ELSEIF C_COM_TAX-TXJCD_SF NE C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_SF = C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_POA = C_COM_TAX-TXJCD_ST.
SELECT SINGLE * FROM KNVV
WHERE INCO1 = KOMK-INCO1
AND INCO1 NE 'DDP'.
IF SY-SUBRC EQ 0.
w_taxm1 = 0.
CH_USER_CHANGED_FIELDS-ACCNT_NO = W_TAXM1.
CH_USER_CHANGED_FIELDS-ACCNT_CLS = 'Y'.
ENDIF.
ENDIF.
ENDIF.
SELECT SINGLE taxkd FROM knvi INTO knvi-taxkd
WHERE kunnr = i_komk-kunwe
AND aland = i_komk-land1.
IF SY-TCODE = 'VA01' OR SY-TCODE = 'VA02' OR SY-TCODE = 'VA03' OR
SY-TCODE = 'VF01' OR SY-TCODE = 'VF02' OR SY-TCODE = 'VF03' OR SY-TCODE
= 'VF04' OR SY-TCODE = 'VF05' OR SY-TCODE = 'VF05'.
SELECT SINGLE * FROM kna1 INTO i_kna1
WHERE kunnr = i_komk-kunwe.
IF i_KNA1-land1 EQ 'CA'.
C_COM_TAX-TXJCD_SF = C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_POA = C_COM_TAX-TXJCD_ST.
ENDIF.
ENDIF.
I am able to enter the user exit, but there is no value for KNA1-LAND1 or C_COM_TAX-TAXJCD_SF or C_COM_TAX-TAXJCD_ST. Does anyone what I am missing ? Please help.
Thanks in advance !!!!
NHi NP ,
which User exit ur using ? Are u talking abt MIRO or VF01.
Regards
Prabhu -
User exit activation and deactivation in production server
If I activate project of corresponding user exit and after transporting the request to Production ,
then for deactivating the project will a request is generated or should i login to Production for deactivating the project.
ThanksHi,
Deactivating the project would again ask for a request so we have to deactivate in development and take it via a transport to production.
Regards,
Himanshu -
Issue with user exit ZXPADU01 and ZXPADU02
Hi,
I am trying to change the existing record for the info type 0015 for an employee in Pa30 transaction.
my requirement is i need old value and new value when i am changing the existing record in info type 0015.
When i kept break point in user exit ZXPADU01 it is not triggering it is triggering only when we creating the record.
i tried with user exit ZXPADU02 it is not working as per my requirement.
My requirement is :whenever i am changing the existing record(modifying record) i need old value and new value.
Anybody can suggest me how to fix this issue.
Thanks,
MaheedharDear Maheedhar,
The best way to achieve this requirement is to use the PAI user exit ZXPADU02 import parameter PSAVE. The PSAVE parameter contains the PBO original / initial record, before any changes take place.
The INNNN parameter contains the current PAI record as usual, in order to be used for customer check and new values. Thus, you've got both the old and the new record in place, and you can make your comparison according to the business requirements: -
Difference in user exit , fm and includes
HI,
What is user exit , function module and includes? What is the difference among them? When and how to use them? Please provide example.
Regards,
PramodHi Pramod,
user exits, function modules and includes can not be compared to each other. Each one of them carry their own purpose and functionality.
User exit's help you in achieving the additional functionality that standard SAP doesnt offer.
For example, if your client requirement is add another tab in sales order in addition to the existing ones............it can be done using the user exit.
SAP has provided several user exits through which you provide the additional functionality to the client without disturbing the SAP standard code.
you can view SAP standard user exits using t-code: SMOD
Function modules help you in carrying out a specific task. They can be called into a program to perform a particular task and are resuable any number of times i.e. can be called into any program to perform the same task.
SAP has already provided many function modules, for example - for determining exhange rates, reading texts etc.
Apart from the SAP standard ones, you can also develop your own function module using transaction code SE37 and use them appropriately.
Includes can be defined as sub programs.........they are part of a program. Include can either be local or global i.e. can be restricted to be used in a particular program and can be made available to other programs.
Basically, a main program is divided into several includes for a better understanding.
REWARD POINTS IF HELPFUL
Regards
Sai -
User-exit CO11N and CO13 (for GM)
Hello to all!
I need a user-exit (or something like this) in transaction CO11N and CO13 where also the goods movements are available. In all the u201Cnormalu201D User-Exits while confirmation (CONFPP01 until CONFPP07) I have only tables like AFKO, AFPO, AFVC, AFRU u2026 in access but I need the GOODSMOVEMENTS for a further processing step for the movement with movement type 101.
Thanks in advance,
RegardsDid you ever tried searching in SAP enhancements for your req
try these.... Find yourself
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving -
HI SAP Gurus,
Can anybody please tell me what are user exits and BADI'S, and how are they used.
Thanks in Advance.
SravanthiUser exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality.
An example of a user exits :-
MODULE user_exit_0001 INPUT
CASE okcode.
WHEN 'BACK OR EXIT'.
CASE sy-dynnr.
WHEN '100'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN '200'.
Note that you can write any code that satisfy your needs. ****
But in this case, this was wrote as a sample code for reference sake. ****
And you can test it. ****
SET SCREEN 100.
LEAVE SCREEN.
ENDCASE.
ENDCASE.
BADI: can be used for multiple implementations
that is the difference between user exit and Badi.
which-ever thing you execute that related code will be executed.
see the Badi's doc
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
Courtesy - Kushagra
Maybe you are looking for
-
Comparing Data between two tables with different structure
Hi, I have 2 tables T1 and T2. Both tables have different structure. I have to check for rows missing in T1 which exist in T2 and vice-versa. I can do that using MINUS operator. But the part where the data exists in both T1 and T2, I have to compare
-
Hey everybody, In my company, we are trying to use OHJ and OHW for our java products and web browser based products. To follow the guidelines and the usablity procedures I need to customize the look of OHJ and OHW to met ou products requirements. I'v
-
My password reset requests never come thru to my email
they are not in my junk or spam folders, nor my blocked senders. the emails just never come thru. its for my icloud password that im trying to reset
-
An unknown error has occurred (-3256)
i use to be able to play itunes through my computer speaker and airport express (stereo speakers) at the same time. now i keep getting a error accurred connecting to remote speakers "living room".. an unknown error has accurred (-3256). i can only us
-
Hi experts! I need help for export a WEBdynpro. I need help to export a webdynpro project in an PAR file, to import it in a EP. This is the only way I have for do this. some idea to do this? Best Regards. Simón Arancibia